new file mode 100644
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/arm,mhu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM MHU Mailbox Controller
+
+maintainers:
+ - Jassi Brar <jaswinder.singh@linaro.org>
+
+description: |
+ The ARM's Message-Handling-Unit (MHU) is a mailbox controller that has 3
+ independent channels/links to communicate with remote processor(s). MHU links
+ are hardwired on a platform. A link raises interrupt for any received data.
+ However, there is no specified way of knowing if the sent data has been read
+ by the remote. This driver assumes the sender polls STAT register and the
+ remote clears it after having read the data. The last channel is specified to
+ be a 'Secure' resource, hence can't be used by Linux running NS.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+ properties:
+ compatible:
+ contains:
+ const: arm,mhu
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: arm,mhu
+ - const: arm,primecell
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: low-priority non-secure
+ - description: high-priority non-secure
+ - description: Secure
+ maxItems: 3
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: apb_pclk
+
+ '#mbox-cells':
+ description: Index of the channel.
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#mbox-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ mhuA: mailbox@2b1f0000 {
+ #mbox-cells = <1>;
+ compatible = "arm,mhu", "arm,primecell";
+ reg = <0 0x2b1f0000 0 0x1000>;
+ interrupts = <0 36 4>, /* LP-NonSecure */
+ <0 35 4>, /* HP-NonSecure */
+ <0 37 4>; /* Secure */
+ clocks = <&clock 0 2 1>;
+ clock-names = "apb_pclk";
+ };
+
+ mhu_client_scb: scb@2e000000 {
+ compatible = "fujitsu,mb86s70-scb-1.0";
+ reg = <0 0x2e000000 0 0x4000>;
+ mboxes = <&mhuA 1>; /* HP-NonSecure */
+ };
+ };
deleted file mode 100644
@@ -1,43 +0,0 @@
-ARM MHU Mailbox Driver
-======================
-
-The ARM's Message-Handling-Unit (MHU) is a mailbox controller that has
-3 independent channels/links to communicate with remote processor(s).
- MHU links are hardwired on a platform. A link raises interrupt for any
-received data. However, there is no specified way of knowing if the sent
-data has been read by the remote. This driver assumes the sender polls
-STAT register and the remote clears it after having read the data.
-The last channel is specified to be a 'Secure' resource, hence can't be
-used by Linux running NS.
-
-Mailbox Device Node:
-====================
-
-Required properties:
---------------------
-- compatible: Shall be "arm,mhu" & "arm,primecell"
-- reg: Contains the mailbox register address range (base
- address and length)
-- #mbox-cells Shall be 1 - the index of the channel needed.
-- interrupts: Contains the interrupt information corresponding to
- each of the 3 links of MHU.
-
-Example:
---------
-
- mhu: mailbox@2b1f0000 {
- #mbox-cells = <1>;
- compatible = "arm,mhu", "arm,primecell";
- reg = <0 0x2b1f0000 0x1000>;
- interrupts = <0 36 4>, /* LP-NonSecure */
- <0 35 4>, /* HP-NonSecure */
- <0 37 4>; /* Secure */
- clocks = <&clock 0 2 1>;
- clock-names = "apb_pclk";
- };
-
- mhu_client: scb@2e000000 {
- compatible = "fujitsu,mb86s70-scb-1.0";
- reg = <0 0x2e000000 0x4000>;
- mboxes = <&mhu 1>; /* HP-NonSecure */
- };
Convert the DT binding over to Json-schema. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> --- V4: - Dual license - improved description for interrupts .../devicetree/bindings/mailbox/arm,mhu.yaml | 87 +++++++++++++++++++ .../devicetree/bindings/mailbox/arm-mhu.txt | 43 --------- 2 files changed, 87 insertions(+), 43 deletions(-) create mode 100644 Documentation/devicetree/bindings/mailbox/arm,mhu.yaml delete mode 100644 Documentation/devicetree/bindings/mailbox/arm-mhu.txt