@@ -11,6 +11,7 @@
#include "zynqmp.dtsi"
#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/phy/phy.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
@@ -36,6 +37,31 @@ memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
};
+
+ clock_si5338_0: clk27 { /* u55 SI5338-GM */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+
+ clock_si5338_2: clk26 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ };
+
+ clock_si5338_3: clk150 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <150000000>;
+ };
+};
+
+&psgtr {
+ status = "okay";
+ /* dp, usb3, sata */
+ clocks = <&clock_si5338_0>, <&clock_si5338_2>, <&clock_si5338_3>;
+ clock-names = "ref1", "ref2", "ref3";
};
&fpd_dma_chan1 {
@@ -328,6 +354,8 @@ &sata {
ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ phy-names = "sata-phy";
+ phys = <&psgtr 3 PHY_TYPE_SATA 1 3>;
};
/* eMMC */
@@ -357,4 +385,7 @@ &usb0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0_default>;
dr_mode = "host";
+ phy-names = "usb3-phy";
+ phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+ maximum-speed = "super-speed";
};
Add psgtr description for SATA and USB. Display Port could be also added but it wasn't tested yet. Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- Changes in v2: None .../dts/xilinx/zynqmp-zc1751-xm015-dc1.dts | 31 +++++++++++++++++++ 1 file changed, 31 insertions(+)