| Message ID | 40501635-6f5b-20c9-f8bc-d17e26b58426@lechnology.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Jan 11, 2018 at 11:22 AM, David Lechner <david@lechnology.com> wrote: > On 01/11/2018 06:45 AM, Adam Ford wrote: >> >> On Wed, Jan 10, 2018 at 8:50 PM, David Lechner <david@lechnology.com> >> wrote: >>> >>> On 01/10/2018 04:24 PM, Adam Ford wrote: >>>> >>>> >>>> >>>> I am available tomorrow to build and test patches against the >>>> da850-evm. I just need to know which version(s) to test. >>> >>> >>> >>> Great. As per the cover letter: >>> >>> You can find a working branch with everything included in the >>> "common-clk-v5" >>> branch of https://github.com/dlech/ev3dev-kernel.git. >> >> >> I wasn't sure if things had changed after some of the dialog about the >> bindings and device tree. > > > Not yet. ;-) > >> >> Here is my log with DEBUG_LL and CONFIG_EARLY_PRINTK set : >> >> Starting kernel ... >> >> Uncompressing Linux... done, booting the kernel. >> Booting Linux on physical CPU 0x0 >> Linux version 4.15.0-rc4-g8564e0f (aford@ubuntu16) (gcc version 7.2.0 >> (Buildroot 2017.11.1-00021-g7b43660)) #2 PREEMPT Thu Jan 11 06:35:29 >> CST 2018 >> CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f >> CPU: VIVT data cache, VIVT instruction cache >> OF: fdt: Machine model: DA850/AM1808/OMAP-L138 EVM > > > OK, using device tree... Sorry, I thought I was supposed to. I retested using the board file, but it also resulted in a hang. > > [snip] > > > If you are getting to this point, you probably don't need DEBUG_LL. > It looks like "earlyprint" is not being passed to the command line > anyway, so CONFIG_EARLY_PRINTK is not actually doing anything. > >> brd: module loaded >> libphy: Fixed MDIO Bus: probed >> davinci_mdio 1e24000.mdio: failed to get device clock >> davinci_mdio: probe of 1e24000.mdio failed with error -2 > > > It looks like this needs a clock-names property in the device tree. > Please make this change and try again: > > diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi > index 08a9817..fd3e316 100644 > --- a/arch/arm/boot/dts/da850.dtsi > +++ b/arch/arm/boot/dts/da850.dtsi > @@ -713,6 +713,7 @@ > #size-cells = <0>; > reg = <0x224000 0x1000>; > clocks = <&psc1 5>; > + clock-names = "fck"; > status = "disabled"; > }; > eth0: ethernet@220000 { > > [snip] I added your copy-names entry to my device tree and we get a login prompt. :-) > I'm not sure why there is an error here. I'm using I2C0 on my board, > so I am fairly confident that it is not a problem introduced by this > series. > >> console [netcon0] enabled >> netconsole: network logging started >> davinci_emac 1e20000.ethernet: incompatible machine/device type for >> reading mac address >> hctosys: unable to open rtc device (rtc0) >> > > What is normally the next line after this in a working boot? > > Also please try passing "clk_ignore_unused" to the kernel command line. Here is the log. There seems to be some garbled characters that don't seem to appear. I'm going to double check those against the stock kernel. Starting kernel ... Uncompressing Linux... done, booting the kernel. Booting Linux on physical CPU 0x0 Linux version 4.15.0-rc4-g8564e0f (aford@ubuntu16) (gcc version 7.2.0 (Buildroot 2017.11.1-00021-g7b43660)) #2 PREEMPT Thu Jan 11 06:35:29 CST 2018 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f CPU: VIVT data cache, VIVT instruction cache OF: fdt: Machine model: DA850/AM1808/OMAP-L138 EVM debug: ignoring loglevel setting. bootconsole [earlycon0] enabled Memory policy: Data cache writethrough cma: Reserved 16 MiB at 0xc2c00000 DaVinci da850/omap-l138 variant 0x0 On node 0 totalpages: 16384 DMA zone: 128 pages used for memmap DMA zone: 0 pages reserved DMA zone: 16384 pages, LIFO batch:3 random: fast init done pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 1 zonelists, mobility grouping on. Total pages: 16256 Kernel command line: console=ttyS2,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait ignore_loglevel earlyprintk clk_ignore_unused Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 42164K/65536K available (4548K kernel code, 280K rwdata, 1044K rodata, 232K init, 143K bss, 6988K reserved, 16384K cma-reserved) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xc4800000 - 0xff800000 ( 944 MB) lowmem : 0xc0000000 - 0xc4000000 ( 64 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0x(ptrval) - 0x(ptrval) (4550 kB) .init : 0x(ptrval) - 0x(ptrval) ( 232 kB) .data : 0x(ptrval) -&�p`� rval) Qm^�`} b � $\���� �! � "V � ���@ B- d�����}bf ʒf� i�console [ttyS2] enabled console [ttyS2] enabled��F 0x(ptrval) ( 144 kB) bootconsole [earlycon0] disabledObjects=0, CP&�p^�-�Mdes=1 bootconsole [earlycon0] disabledb ʒf� i�a �F $\���� brd: module loaded��} ��B libphy: Fixed MDIO Bus: probed &�p^�-�I davinci_mdio 1e24000.mdio: davinci mdio revision 1.5, bus freq 2200000 a- R� /^���� ���v@a��.���� ^\�`&�`l��f ����͍Mֈ�� �E ����э�)�)! �}�y ya bK����� ֈ�� davinci_mdio 1e24000.mdio: detected phy mask fffffffe ��I ")=M��-�)!iD����mi-��I �k�� ���)� r��.��э�i2� �v� �k$^��э�-�-!mD��q} ] �K���� 6m�R�`� q)�M ���^�� �� libphy: 1e24000.mdio: probed&��߉��a I�j�`�a�I���} 2/�p� bv VK,�q� 6M�- � ֈ�� �I ��f��a�I҈��} 2 A-!�a-� �K����!aMq- ")=I��-�-!mD��} 2 A-!�a-� �K -� &-=M��-�-!mD� davinci_mdio 1e24000.mdio: phy[0]: device 1e24000.mdio:00, driver SMSC LAN8710/LAN8720ݕ�� I�Sm��aM�-! &��P-4RhR� Ε�-� �K�^t@� i2c /dev entries driver davinci_mmc 1c40000.mmc: Using DMA, 4-bit mode NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 Loading compiled-in X.509 certificates mmc0: host does not support reading read-only switch, assuming write-enable mmc0: new high speed SDHC card at address b368 mmcblk0: mmc0:b368 00000 3.75 GiB mmcblk0: p1 p2 pca953x 0-0020: 0-0020 supply vcc not found, using dummy regulator pca953x 0-0020: failed reading register pca953x: probe of 0-0020 failed with error -121 console [netcon0] enabled netconsole: network logging started davinci_emac 1e20000.ethernet: incompatible machine/device type for reading mac address hctosys: unable to open rtc device (rtc0) clk: Not disabling unused clocks vbat: disabling EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 179:2. devtmpfs: mounted Freeing unused kernel memory: 232K This architecture does not have kernel memory protection. EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered Starting logging: OK Initializing random number generator... done. Starting network: OK Welcome to Buildroot buildroot login: > However, I get a reboot failure: umount: devtmpfs busy - remounted read-only EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes Requesting system reboot reboot: Restarting system Reboot failed -- System halted I'll run more tests on a stock kernel to look at the reboot failure and the uart noise. adam
On 01/11/2018 12:09 PM, Adam Ford wrote: > On Thu, Jan 11, 2018 at 11:22 AM, David Lechner <david@lechnology.com> wrote: >> On 01/11/2018 06:45 AM, Adam Ford wrote: >>> >>> On Wed, Jan 10, 2018 at 8:50 PM, David Lechner <david@lechnology.com> >>> wrote: >>>> >>>> On 01/10/2018 04:24 PM, Adam Ford wrote: >>>>> >>>>> >>>>> >>>>> I am available tomorrow to build and test patches against the >>>>> da850-evm. I just need to know which version(s) to test. >>>> >>>> >>>> >>>> Great. As per the cover letter: >>>> >>>> You can find a working branch with everything included in the >>>> "common-clk-v5" >>>> branch of https://github.com/dlech/ev3dev-kernel.git. >>> >>> >>> I wasn't sure if things had changed after some of the dialog about the >>> bindings and device tree. >> >> >> Not yet. ;-) >> >>> >>> Here is my log with DEBUG_LL and CONFIG_EARLY_PRINTK set : >>> >>> Starting kernel ... >>> >>> Uncompressing Linux... done, booting the kernel. >>> Booting Linux on physical CPU 0x0 >>> Linux version 4.15.0-rc4-g8564e0f (aford@ubuntu16) (gcc version 7.2.0 >>> (Buildroot 2017.11.1-00021-g7b43660)) #2 PREEMPT Thu Jan 11 06:35:29 >>> CST 2018 >>> CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f >>> CPU: VIVT data cache, VIVT instruction cache >>> OF: fdt: Machine model: DA850/AM1808/OMAP-L138 EVM >> >> >> OK, using device tree... > > Sorry, I thought I was supposed to. I retested using the board file, > but it also resulted in a hang. This was just intended as a note to self. But we do need to test both. Let's stick with the device tree boot first. > >> >> > [snip] >> >> >> If you are getting to this point, you probably don't need DEBUG_LL. >> It looks like "earlyprint" is not being passed to the command line >> anyway, so CONFIG_EARLY_PRINTK is not actually doing anything. >> >>> brd: module loaded >>> libphy: Fixed MDIO Bus: probed >>> davinci_mdio 1e24000.mdio: failed to get device clock >>> davinci_mdio: probe of 1e24000.mdio failed with error -2 >> >> >> It looks like this needs a clock-names property in the device tree. >> Please make this change and try again: >> >> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi >> index 08a9817..fd3e316 100644 >> --- a/arch/arm/boot/dts/da850.dtsi >> +++ b/arch/arm/boot/dts/da850.dtsi >> @@ -713,6 +713,7 @@ >> #size-cells = <0>; >> reg = <0x224000 0x1000>; >> clocks = <&psc1 5>; >> + clock-names = "fck"; >> status = "disabled"; >> }; >> eth0: ethernet@220000 { >> >> > [snip] > > I added your copy-names entry to my device tree and we get a login prompt. :-) OK, great! It sounds like device tree is working after this change. I guess we can move on to non-device-tree. > >> I'm not sure why there is an error here. I'm using I2C0 on my board, >> so I am fairly confident that it is not a problem introduced by this >> series. >> >>> console [netcon0] enabled >>> netconsole: network logging started >>> davinci_emac 1e20000.ethernet: incompatible machine/device type for >>> reading mac address >>> hctosys: unable to open rtc device (rtc0) >>> >> >> What is normally the next line after this in a working boot? >> >> Also please try passing "clk_ignore_unused" to the kernel command line. > > Here is the log. There seems to be some garbled characters that don't > seem to appear. I'm going to double check those against the stock > kernel. > > > Starting kernel ... > > Uncompressing Linux... done, booting the kernel. > Booting Linux on physical CPU 0x0 > Linux version 4.15.0-rc4-g8564e0f (aford@ubuntu16) (gcc version 7.2.0 > (Buildroot 2017.11.1-00021-g7b43660)) #2 PREEMPT Thu Jan 11 06:35:29 > CST 2018 > CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f > CPU: VIVT data cache, VIVT instruction cache > OF: fdt: Machine model: DA850/AM1808/OMAP-L138 EVM > debug: ignoring loglevel setting. > bootconsole [earlycon0] enabled > Memory policy: Data cache writethrough > cma: Reserved 16 MiB at 0xc2c00000 > DaVinci da850/omap-l138 variant 0x0 > On node 0 totalpages: 16384 > DMA zone: 128 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 16384 pages, LIFO batch:3 > random: fast init done > pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 > pcpu-alloc: [0] 0 > Built 1 zonelists, mobility grouping on. Total pages: 16256 > Kernel command line: console=ttyS2,115200n8 root=/dev/mmcblk0p2 rw > rootfstype=ext4 rootwait ignore_loglevel earlyprintk clk_ignore_unused > Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) > Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) > Memory: 42164K/65536K available (4548K kernel code, 280K rwdata, 1044K > rodata, 232K init, 143K bss, 6988K reserved, 16384K cma-reserved) > Virtual kernel memory layout: > vector : 0xffff0000 - 0xffff1000 ( 4 kB) > fixmap : 0xffc00000 - 0xfff00000 (3072 kB) > vmalloc : 0xc4800000 - 0xff800000 ( 944 MB) > lowmem : 0xc0000000 - 0xc4000000 ( 64 MB) > modules : 0xbf000000 - 0xc0000000 ( 16 MB) > .text : 0x(ptrval) - 0x(ptrval) (4550 kB) > .init : 0x(ptrval) - 0x(ptrval) ( 232 kB) > .data : 0x(ptrval) -&�p`� rval) Qm^�`} b � $\���� �! � > "V � ���@ B- d�����}bf ʒf� i�console [ttyS2] enabled > console [ttyS2] enabled��F 0x(ptrval) ( 144 kB) > bootconsole [earlycon0] disabledObjects=0, CP&�p^�-�Mdes=1 > bootconsole [earlycon0] disabledb ʒf� i�a �F $\���� > brd: module loaded��} ��B > libphy: Fixed MDIO Bus: probed &�p^�-�I > davinci_mdio 1e24000.mdio: davinci mdio revision 1.5, bus freq 2200000 > a- R� /^���� ���v@a��.���� ^\�`&�`l��f ����͍Mֈ�� �E ����э�)�)! �}�y > ya bK����� ֈ�� > davinci_mdio 1e24000.mdio: detected phy mask > fffffffe ��I ")=M��-�)!iD����mi-��I �k�� > ���)� r��.��э�i2� �v� �k$^��э�-�-!mD��q} ] �K���� 6m�R�`� q)�M ���^�� > �� > libphy: 1e24000.mdio: > probed&��߉��a I�j�`�a�I���} 2/�p� bv VK,�q� 6M�- � ֈ�� �I ��f��a�I҈��} > 2 A-!�a-� �K����!aMq- ")=I��-�-!mD��} 2 A-!�a-� �K -� &-=M��-�-!mD� > davinci_mdio 1e24000.mdio: phy[0]: device 1e24000.mdio:00, driver SMSC > LAN8710/LAN8720ݕ�� I�Sm��aM�-! &��P-4RhR� > Ε�-� �K�^t@� > i2c /dev entries driver > davinci_mmc 1c40000.mmc: Using DMA, 4-bit mode > NET: Registered protocol family 10 > Segment Routing with IPv6 > sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver > NET: Registered protocol family 17 > Loading compiled-in X.509 certificates > mmc0: host does not support reading read-only switch, assuming write-enable > mmc0: new high speed SDHC card at address b368 > mmcblk0: mmc0:b368 00000 3.75 GiB > mmcblk0: p1 p2 > pca953x 0-0020: 0-0020 supply vcc not found, using dummy regulator > pca953x 0-0020: failed reading register > pca953x: probe of 0-0020 failed with error -121 > console [netcon0] enabled > netconsole: network logging started > davinci_emac 1e20000.ethernet: incompatible machine/device type for > reading mac address > hctosys: unable to open rtc device (rtc0) > clk: Not disabling unused clocks If removing the "clk_ignore_unused" option causes the board to not boot, then we still have problems that need to be fixed, so please also test without this option. > vbat: disabling > EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) > VFS: Mounted root (ext4 filesystem) on device 179:2. > devtmpfs: mounted > Freeing unused kernel memory: 232K > This architecture does not have kernel memory protection. > EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered > Starting logging: OK > Initializing random number generator... done. > Starting network: OK > > Welcome to Buildroot > buildroot login: > > >> > > However, I get a reboot failure: > > umount: devtmpfs busy - remounted read-only > EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) > The system is going down NOW! > Sent SIGTERM to all processes > Sent SIGKILL to all processes > Requesting system reboot > > reboot: Restarting system > Reboot failed -- System halted > > I'll run more tests on a stock kernel to look at the reboot failure > and the uart noise. > > adam > The reboot failure probably has to do with the watchdog patches that are dependencies of this series. Also, see the cover letter about how to avoid garbled output. Either disable low level debugging or disable switching the parent of the async3 clock.
On Thu, Jan 11, 2018 at 12:29 PM, David Lechner <david@lechnology.com> wrote: > On 01/11/2018 12:09 PM, Adam Ford wrote: >> >> On Thu, Jan 11, 2018 at 11:22 AM, David Lechner <david@lechnology.com> >> wrote: >>> >>> On 01/11/2018 06:45 AM, Adam Ford wrote: >>>> >>>> >>>> On Wed, Jan 10, 2018 at 8:50 PM, David Lechner <david@lechnology.com> >>>> wrote: >>>>> >>>>> >>>>> On 01/10/2018 04:24 PM, Adam Ford wrote: >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> I am available tomorrow to build and test patches against the >>>>>> da850-evm. I just need to know which version(s) to test. >>>>> >>>>> >>>>> >>>>> >>>>> Great. As per the cover letter: >>>>> >>>>> You can find a working branch with everything included in the >>>>> "common-clk-v5" >>>>> branch of https://github.com/dlech/ev3dev-kernel.git. >>>> >>>> >>>> >>>> I wasn't sure if things had changed after some of the dialog about the >>>> bindings and device tree. >>> >>> >>> >>> Not yet. ;-) >>> >>>> >>>> Here is my log with DEBUG_LL and CONFIG_EARLY_PRINTK set : >>>> >>>> Starting kernel ... >>>> >>>> Uncompressing Linux... done, booting the kernel. >>>> Booting Linux on physical CPU 0x0 >>>> Linux version 4.15.0-rc4-g8564e0f (aford@ubuntu16) (gcc version 7.2.0 >>>> (Buildroot 2017.11.1-00021-g7b43660)) #2 PREEMPT Thu Jan 11 06:35:29 >>>> CST 2018 >>>> CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f >>>> CPU: VIVT data cache, VIVT instruction cache >>>> OF: fdt: Machine model: DA850/AM1808/OMAP-L138 EVM >>> >>> >>> >>> OK, using device tree... >> >> >> Sorry, I thought I was supposed to. I retested using the board file, >> but it also resulted in a hang. > > > This was just intended as a note to self. But we do need to test both. > Let's stick with the device tree boot first. > >> >>> >>> >> [snip] >>> >>> >>> >>> If you are getting to this point, you probably don't need DEBUG_LL. >>> It looks like "earlyprint" is not being passed to the command line >>> anyway, so CONFIG_EARLY_PRINTK is not actually doing anything. >>> >>>> brd: module loaded >>>> libphy: Fixed MDIO Bus: probed >>>> davinci_mdio 1e24000.mdio: failed to get device clock >>>> davinci_mdio: probe of 1e24000.mdio failed with error -2 >>> >>> >>> >>> It looks like this needs a clock-names property in the device tree. >>> Please make this change and try again: >>> >>> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi >>> index 08a9817..fd3e316 100644 >>> --- a/arch/arm/boot/dts/da850.dtsi >>> +++ b/arch/arm/boot/dts/da850.dtsi >>> @@ -713,6 +713,7 @@ >>> #size-cells = <0>; >>> reg = <0x224000 0x1000>; >>> clocks = <&psc1 5>; >>> + clock-names = "fck"; >>> status = "disabled"; >>> }; >>> eth0: ethernet@220000 { >>> >>> >> [snip] >> >> I added your copy-names entry to my device tree and we get a login prompt. >> :-) > > > OK, great! It sounds like device tree is working after this change. I guess > we can move on to non-device-tree. > > >> >>> I'm not sure why there is an error here. I'm using I2C0 on my board, >>> so I am fairly confident that it is not a problem introduced by this >>> series. >>> >>>> console [netcon0] enabled >>>> netconsole: network logging started >>>> davinci_emac 1e20000.ethernet: incompatible machine/device type for >>>> reading mac address >>>> hctosys: unable to open rtc device (rtc0) >>>> >>> >>> What is normally the next line after this in a working boot? >>> >>> Also please try passing "clk_ignore_unused" to the kernel command line. >> >> >> Here is the log. There seems to be some garbled characters that don't >> seem to appear. I'm going to double check those against the stock >> kernel. >> >> [snip] > > > If removing the "clk_ignore_unused" option causes the board to not boot, > then we still have problems that need to be fixed, so please also test > without this option. Without this option, it still does not boot. Without device tree it hangs after: [snip] NET: Registered protocol family 17 Loading compiled-in X.509 certificates console [netcon0] enabled netconsole: network logging started davinci_emac davinci_emac.1: using random MAC addr: 5e:38:1a:1f:4f:77 mmc0: host does not support reading read-only switch, assuming write-enable hctosys: unable to open rtc device (rtc0) mmc0: new high speed SDHC card at address b368 With device tree it hangs after: [snip] mmc0: host does not support reading read-only switch, assuming write-enable mmc0: new high speed SDHC card at address b368 mmcblk0: mmc0:b368 00000 3.75 GiB mmcblk0: p1 p2 pca953x 0-0020: 0-0020 supply vcc not found, using dummy regulator pca953x 0-0020: failed reading register pca953x: probe of 0-0020 failed with error -121 console [netcon0] enabled netconsole: network logging started davinci_emac 1e20000.ethernet: incompatible machine/device type for reading mac address hctosys: unable to open rtc device (rtc0) > >> vbat: disabling >> EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: >> (null) >> VFS: Mounted root (ext4 filesystem) on device 179:2. >> devtmpfs: mounted >> Freeing unused kernel memory: 232K >> This architecture does not have kernel memory protection. >> EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered >> Starting logging: OK >> Initializing random number generator... done. >> Starting network: OK >> >> Welcome to Buildroot >> buildroot login: >> >> >>> >> >> However, I get a reboot failure: >> >> umount: devtmpfs busy - remounted read-only >> EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) >> The system is going down NOW! >> Sent SIGTERM to all processes >> Sent SIGKILL to all processes >> Requesting system reboot >> >> reboot: Restarting system >> Reboot failed -- System halted >> >> I'll run more tests on a stock kernel to look at the reboot failure >> and the uart noise. >> >> adam >> > > The reboot failure probably has to do with the watchdog patches that > are dependencies of this series. > > > Also, see the cover letter about how to avoid garbled output. Either > disable low level debugging or disable switching the parent of the > async3 clock. Disabling the low-level debugging eliminated the garbage. If/when you have more to me to test, feel free to e-mail me. I am available today and tomorrow to test. >
On 01/11/2018 12:09 PM, Adam Ford wrote: > On Thu, Jan 11, 2018 at 11:22 AM, David Lechner <david@lechnology.com> wrote: >> On 01/11/2018 06:45 AM, Adam Ford wrote: >>> >>> On Wed, Jan 10, 2018 at 8:50 PM, David Lechner <david@lechnology.com> >>> wrote: >>>> >>>> On 01/10/2018 04:24 PM, Adam Ford wrote: >>>>> >>>>> >>>>> >>>>> I am available tomorrow to build and test patches against the >>>>> da850-evm. I just need to know which version(s) to test. >>>> >>>> >>>> >>>> Great. As per the cover letter: >>>> >>>> You can find a working branch with everything included in the >>>> "common-clk-v5" >>>> branch of https://github.com/dlech/ev3dev-kernel.git. >>> >>> >>> I wasn't sure if things had changed after some of the dialog about the >>> bindings and device tree. >> >> >> Not yet. ;-) >> >>> >>> Here is my log with DEBUG_LL and CONFIG_EARLY_PRINTK set : >>> >>> Starting kernel ... >>> >>> Uncompressing Linux... done, booting the kernel. >>> Booting Linux on physical CPU 0x0 >>> Linux version 4.15.0-rc4-g8564e0f (aford@ubuntu16) (gcc version 7.2.0 >>> (Buildroot 2017.11.1-00021-g7b43660)) #2 PREEMPT Thu Jan 11 06:35:29 >>> CST 2018 >>> CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f >>> CPU: VIVT data cache, VIVT instruction cache >>> OF: fdt: Machine model: DA850/AM1808/OMAP-L138 EVM >> >> >> OK, using device tree... > > Sorry, I thought I was supposed to. I retested using the board file, > but it also resulted in a hang. > >> >> > [snip] >> >> >> If you are getting to this point, you probably don't need DEBUG_LL. >> It looks like "earlyprint" is not being passed to the command line >> anyway, so CONFIG_EARLY_PRINTK is not actually doing anything. >> >>> brd: module loaded >>> libphy: Fixed MDIO Bus: probed >>> davinci_mdio 1e24000.mdio: failed to get device clock >>> davinci_mdio: probe of 1e24000.mdio failed with error -2 >> >> >> It looks like this needs a clock-names property in the device tree. >> Please make this change and try again: >> >> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi >> index 08a9817..fd3e316 100644 >> --- a/arch/arm/boot/dts/da850.dtsi >> +++ b/arch/arm/boot/dts/da850.dtsi >> @@ -713,6 +713,7 @@ >> #size-cells = <0>; >> reg = <0x224000 0x1000>; >> clocks = <&psc1 5>; >> + clock-names = "fck"; >> status = "disabled"; >> }; >> eth0: ethernet@220000 { >> >> > [snip] > > I added your copy-names entry to my device tree and we get a login prompt. :-) > >> I'm not sure why there is an error here. I'm using I2C0 on my board, >> so I am fairly confident that it is not a problem introduced by this >> series. >> >>> console [netcon0] enabled >>> netconsole: network logging started >>> davinci_emac 1e20000.ethernet: incompatible machine/device type for >>> reading mac address >>> hctosys: unable to open rtc device (rtc0) >>> >> >> What is normally the next line after this in a working boot? >> >> Also please try passing "clk_ignore_unused" to the kernel command line. > > Here is the log. There seems to be some garbled characters that don't > seem to appear. I'm going to double check those against the stock > kernel. > > > Starting kernel ... > > Uncompressing Linux... done, booting the kernel. > Booting Linux on physical CPU 0x0 > Linux version 4.15.0-rc4-g8564e0f (aford@ubuntu16) (gcc version 7.2.0 > (Buildroot 2017.11.1-00021-g7b43660)) #2 PREEMPT Thu Jan 11 06:35:29 > CST 2018 > CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f > CPU: VIVT data cache, VIVT instruction cache > OF: fdt: Machine model: DA850/AM1808/OMAP-L138 EVM > debug: ignoring loglevel setting. > bootconsole [earlycon0] enabled > Memory policy: Data cache writethrough > cma: Reserved 16 MiB at 0xc2c00000 > DaVinci da850/omap-l138 variant 0x0 > On node 0 totalpages: 16384 > DMA zone: 128 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 16384 pages, LIFO batch:3 > random: fast init done > pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 > pcpu-alloc: [0] 0 > Built 1 zonelists, mobility grouping on. Total pages: 16256 > Kernel command line: console=ttyS2,115200n8 root=/dev/mmcblk0p2 rw > rootfstype=ext4 rootwait ignore_loglevel earlyprintk clk_ignore_unused > Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) > Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) > Memory: 42164K/65536K available (4548K kernel code, 280K rwdata, 1044K > rodata, 232K init, 143K bss, 6988K reserved, 16384K cma-reserved) > Virtual kernel memory layout: > vector : 0xffff0000 - 0xffff1000 ( 4 kB) > fixmap : 0xffc00000 - 0xfff00000 (3072 kB) > vmalloc : 0xc4800000 - 0xff800000 ( 944 MB) > lowmem : 0xc0000000 - 0xc4000000 ( 64 MB) > modules : 0xbf000000 - 0xc0000000 ( 16 MB) > .text : 0x(ptrval) - 0x(ptrval) (4550 kB) > .init : 0x(ptrval) - 0x(ptrval) ( 232 kB) > .data : 0x(ptrval) -&�p`� rval) Qm^�`} b � $\���� �! � > "V � ���@ B- d�����}bf ʒf� i�console [ttyS2] enabled > console [ttyS2] enabled��F 0x(ptrval) ( 144 kB) > bootconsole [earlycon0] disabledObjects=0, CP&�p^�-�Mdes=1 > bootconsole [earlycon0] disabledb ʒf� i�a �F $\���� > brd: module loaded��} ��B > libphy: Fixed MDIO Bus: probed &�p^�-�I > davinci_mdio 1e24000.mdio: davinci mdio revision 1.5, bus freq 2200000 > a- R� /^���� ���v@a��.���� ^\�`&�`l��f ����͍Mֈ�� �E ����э�)�)! �}�y > ya bK����� ֈ�� > davinci_mdio 1e24000.mdio: detected phy mask > fffffffe ��I ")=M��-�)!iD����mi-��I �k�� > ���)� r��.��э�i2� �v� �k$^��э�-�-!mD��q} ] �K���� 6m�R�`� q)�M ���^�� > �� > libphy: 1e24000.mdio: > probed&��߉��a I�j�`�a�I���} 2/�p� bv VK,�q� 6M�- � ֈ�� �I ��f��a�I҈��} > 2 A-!�a-� �K����!aMq- ")=I��-�-!mD��} 2 A-!�a-� �K -� &-=M��-�-!mD� > davinci_mdio 1e24000.mdio: phy[0]: device 1e24000.mdio:00, driver SMSC > LAN8710/LAN8720ݕ�� I�Sm��aM�-! &��P-4RhR� > Ε�-� �K�^t@� > i2c /dev entries driver > davinci_mmc 1c40000.mmc: Using DMA, 4-bit mode > NET: Registered protocol family 10 > Segment Routing with IPv6 > sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver > NET: Registered protocol family 17 > Loading compiled-in X.509 certificates > mmc0: host does not support reading read-only switch, assuming write-enable > mmc0: new high speed SDHC card at address b368 > mmcblk0: mmc0:b368 00000 3.75 GiB > mmcblk0: p1 p2 > pca953x 0-0020: 0-0020 supply vcc not found, using dummy regulator > pca953x 0-0020: failed reading register > pca953x: probe of 0-0020 failed with error -121 > console [netcon0] enabled > netconsole: network logging started > davinci_emac 1e20000.ethernet: incompatible machine/device type for > reading mac address > hctosys: unable to open rtc device (rtc0) > clk: Not disabling unused clocks > vbat: disabling > EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) > VFS: Mounted root (ext4 filesystem) on device 179:2. > devtmpfs: mounted > Freeing unused kernel memory: 232K > This architecture does not have kernel memory protection. > EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered > Starting logging: OK > Initializing random number generator... done. > Starting network: OK > > Welcome to Buildroot > buildroot login: > > >> > > However, I get a reboot failure: > > umount: devtmpfs busy - remounted read-only > EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) > The system is going down NOW! > Sent SIGTERM to all processes > Sent SIGKILL to all processes > Requesting system reboot > > reboot: Restarting system > Reboot failed -- System halted > Adam, Did this reboot issue get resolved?
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 08a9817..fd3e316 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -713,6 +713,7 @@ #size-cells = <0>; reg = <0x224000 0x1000>; clocks = <&psc1 5>; + clock-names = "fck"; status = "disabled"; }; eth0: ethernet@220000 {