@@ -1,36 +1,4 @@
-Generic device tree bindings for Real Time Clock devices
-========================================================
-
-This document describes generic bindings which can be used to describe Real Time
-Clock devices in a device tree.
-
-Required properties
--------------------
-
-- compatible : name of RTC device following generic names recommended practice.
-
-For other required properties e.g. to describe register sets,
-clocks, etc. check the binding documentation of the specific driver.
-
-Optional properties
--------------------
-
-- start-year : if provided, the default hardware range supported by the RTC is
- shifted so the first usable year is the specified one.
-
-The following properties may not be supported by all drivers. However, if a
-driver wants to support one of the below features, it should adapt the bindings
-below.
-- trickle-resistor-ohms : Selected resistor for trickle charger. Should be given
- if trickle charger should be enabled
-- trickle-diode-disable : Do not use internal trickle charger diode Should be
- given if internal trickle charger diode should be
- disabled
-- wakeup-source : Enables wake up of host system on alarm
-- quartz-load-femtofarads : The capacitive load of the quartz(x-tal),
- expressed in femto Farad (fF).
- The default value shall be listed (if optional),
- and likewise all valid values.
+This file has been moved to rtc.yaml.
Trivial RTCs
------------
new file mode 100644
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RTC Generic Binding
+
+maintainers:
+ - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+description: |
+ This document describes generic bindings which can be used to
+ describe Real Time Clock devices in a device tree.
+
+properties:
+ $nodename:
+ pattern: "^rtc(@.*|-[0-9a-f])*$"
+
+ quartz-load-femtofarads:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The capacitive load of the quartz(x-tal), expressed in femto
+ Farad (fF). The default value shall be listed (if optional),
+ and likewise all valid values.
+
+ start-year:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ If provided, the default hardware range supported by the RTC is
+ shifted so the first usable year is the specified one.
+
+ trickle-diode-disable:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Do not use internal trickle charger diode. Should be given if
+ internal trickle charger diode should be disabled.
+
+ trickle-resistor-ohms:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Selected resistor for trickle charger. Should be given
+ if trickle charger should be enabled.
+
+ wakeup-source:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Enables wake up of host system on alarm.
+
+...
The real time clocks have a bunch of generic properties that are needed in a device tree. Add a YAML schemas for those. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> --- Documentation/devicetree/bindings/rtc/rtc.txt | 34 +------------- Documentation/devicetree/bindings/rtc/rtc.yaml | 50 +++++++++++++++++++- 2 files changed, 51 insertions(+), 33 deletions(-) create mode 100644 Documentation/devicetree/bindings/rtc/rtc.yaml base-commit: 531b0a360899269bd99a38ba9852a8ba46852bcd