@@ -229,6 +229,35 @@ &extal_clk {
};
&lbsc {
+ flash@0 {
+ compatible = "cfi-flash";
+ reg = <0x0 0x04000000>;
+ pinctrl-0 = <&flash_pins>;
+ pinctrl-names = "default";
+ bank-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "uboot-env";
+ reg = <0x00040000 0x00040000>;
+ read-only;
+ };
+ partition@80000 {
+ label = "flash";
+ reg = <0x00080000 0x03f80000>;
+ };
+ };
+ };
+
ethernet@18000000 {
compatible = "smsc,lan89218", "smsc,lan9115";
reg = <0x18000000 0x100>;
@@ -288,6 +317,11 @@ lbsc {
};
};
+ flash_pins: flash {
+ groups = "lbsc_cs0";
+ function = "lbsc";
+ };
+
scif2_pins: scif2 {
groups = "scif2_data_c";
function = "scif2";
Add a device node for the Spansion S29GL512N NOR FLASH on the Marzen development board. This FLASH resides in the external address space of the Local Bus State Controller. Note that as the CFI-FLASH has a run-time conflict with CPU bring-up, it will only be available when booting with SMP disabled. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- Changes compared to RFC: - Use "cfi-flash" compatible value, - Add pin control, - Move to LBSC, - Depends on "[PATCH] ARM: shmobile: r8a7779: Reserve boot area when SMP is enabled". [1] "[PATCH/RFC] ARM: dts: marzen: Add FLASH node" https://lore.kernel.org/r/07cf5e2b466f3ba217403afc66a8246460609e09.1679330105.git.geert+renesas@glider.be/ --- arch/arm/boot/dts/renesas/r8a7779-marzen.dts | 34 ++++++++++++++++++++ 1 file changed, 34 insertions(+)