diff mbox

[PATCHv4,07/10] arm: mvebu: define and use common Armada XP UART2/3 pinctrl settings

Message ID 48fff9def399198ff282ac4a0618059dfc3a1228.1416351426.git.arno@natisbad.org (mailing list archive)
State New, archived
Headers show

Commit Message

Arnaud Ebalard Nov. 18, 2014, 11:02 p.m. UTC 
This patch defines common Armada XP pinctrl settings for uart2 and
uart3 interfaces (uart0 and uart1 rx/tx do not rely on MPP):

 uart2: MPP42-43 as default
 uart3: MPP44-45 as default

Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
---
 arch/arm/boot/dts/armada-xp.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

\ No newline at end of file
diff mbox

Patch

diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index dcfef0311a88..acb236909649 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -55,6 +55,8 @@ 
 
 			uart2: serial@12200 {
 				compatible = "snps,dw-apb-uart";
+				pinctrl-0 = <&uart2_pins>;
+				pinctrl-names = "default";
 				reg = <0x12200 0x100>;
 				reg-shift = <2>;
 				interrupts = <43>;
@@ -65,6 +67,8 @@ 
 
 			uart3: serial@12300 {
 				compatible = "snps,dw-apb-uart";
+				pinctrl-0 = <&uart3_pins>;
+				pinctrl-names = "default";
 				reg = <0x12300 0x100>;
 				reg-shift = <2>;
 				interrupts = <44>;
@@ -235,4 +239,14 @@ 
 			       "mpp33", "mpp34", "mpp35";
 		marvell,function = "sd0";
 	};
+
+	uart2_pins: uart2-pins {
+		marvell,pins = "mpp42", "mpp43";
+		marvell,function = "uart2";
+	};
+
+	uart3_pins: uart3-pins {
+		marvell,pins = "mpp44", "mpp45";
+		marvell,function = "uart3";
+	};
 };