Message ID | 524D7397.2000200@baylibre.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hi Benoit, Thanks a lot for fixing it. On Thursday 03 October 2013 07:09 PM, Benoit Cousson wrote: > Hi Keerthy, > > On 11/09/2013 07:30, Keerthy wrote: >> On Tuesday 10 September 2013 12:51 AM, Nishanth Menon wrote: >>> On 08/26/2013 12:36 AM, Keerthy wrote: >>>> The Patch adds nodes for TPS659038 PMIC for DRA7 boards. >>>> >>>> It is based on top of: >>>> http://comments.gmane.org/gmane.linux.ports.arm.omap/102459. >>>> >>>> Documentation: Documentation/devicetree/bindings/mfd/palmas.txt >>>> Documentation/devicetree/bindings/regulator/palmas-pmic.txt >>>> >>>> Boot Tested on DRA7 d1 Board. >>>> >>>> Signed-off-by: Keerthy <j-keerthy@ti.com> >>>> --- >>>> arch/arm/boot/dts/dra7-evm.dts | 118 >>>> ++++++++++++++++++++++++++++++++++++++++ >>>> 1 file changed, 118 insertions(+) >>>> >>>> Index: linux/arch/arm/boot/dts/dra7-evm.dts >>>> =================================================================== >>>> --- linux.orig/arch/arm/boot/dts/dra7-evm.dts 2013-08-26 >>>> 09:57:52.496173554 +0530 >>>> +++ linux/arch/arm/boot/dts/dra7-evm.dts 2013-08-26 >>>> 10:38:44.995414695 +0530 >>>> @@ -93,6 +93,119 @@ >>>> pinctrl-names = "default"; >>>> pinctrl-0 = <&i2c1_pins>; >>>> clock-frequency = <400000>; >>>> + >>>> + tps659038: tps659038@58 { >>>> + compatible = "ti,tps659038"; >>>> + reg = <0x58>; >>>> + >>>> + tps659038_pmic { >>>> + compatible = "ti,tps659038-pmic"; >>>> + >>>> + regulators { >>>> + smps123_reg: smps123 { >>>> + /* VDD_MPU */ >>>> + regulator-name = "smps123"; >>>> + regulator-min-microvolt = < 850000>; >>>> + regulator-max-microvolt = <1250000>; >>>> + regulator-always-on; >>>> + regulator-boot-on; >>>> + }; >>>> + >>>> + smps45_reg: smps45 { >>>> + /* VDD_DSPEVE */ >>>> + regulator-name = "smps45"; >>>> + regulator-min-microvolt = < 850000>; >>>> + regulator-max-microvolt = <1150000>; >>>> + regulator-boot-on; >>>> + }; >>>> + >>>> + smps6_reg: smps6 { >>>> + /* VDD_GPU - over VDD_SMPS6 */ >>>> + regulator-name = "smps6"; >>>> + regulator-min-microvolt = <850000>; >>>> + regulator-max-microvolt = <12500000>; >>>> + regulator-boot-on; >>>> + }; >>>> + >>>> + smps7_reg: smps7 { >>>> + /* CORE_VDD */ >>>> + regulator-name = "smps7"; >>>> + regulator-min-microvolt = <850000>; >>>> + regulator-max-microvolt = <1030000>; >>>> + regulator-always-on; >>>> + regulator-boot-on; >>>> + }; >>>> + >>>> + smps8_reg: smps8 { >>>> + /* VDD_IVAHD */ >>>> + regulator-name = "smps8"; >>>> + regulator-min-microvolt = < 850000>; >>>> + regulator-max-microvolt = <1250000>; >>>> + regulator-boot-on; >>>> + }; >>>> + >>>> + smps9_reg: smps9 { >>>> + /* VDDS1V8 */ >>>> + regulator-name = "smps9"; >>>> + regulator-min-microvolt = <1800000>; >>>> + regulator-max-microvolt = <1800000>; >>>> + regulator-always-on; >>>> + regulator-boot-on; >>>> + }; >>>> + >>>> + ldo1_reg: ldo1 { >>>> + /* LDO1_OUT --> SDIO */ >>>> + regulator-name = "ldo1"; >>>> + regulator-min-microvolt = <1800000>; >>>> + regulator-max-microvolt = <3300000>; >>>> + regulator-boot-on; >>>> + }; >>>> + >>>> + ldo2_reg: ldo2 { >>>> + /* VDD_RTCIO */ >>>> + /* LDO2 -> VDDSHV5, LDO2 also goes to >>>> CAN_PHY_3V3 */ >>>> + regulator-name = "ldo2"; >>>> + regulator-min-microvolt = <3300000>; >>>> + regulator-max-microvolt = <3300000>; >>>> + regulator-boot-on; >>>> + }; >>>> + >>>> + ldo3_reg: ldo3 { >>>> + /* VDDA_1V8_PHY */ >>>> + regulator-name = "ldo3"; >>>> + regulator-min-microvolt = <1800000>; >>>> + regulator-max-microvolt = <1800000>; >>>> + regulator-boot-on; >>>> + }; >>>> + >>>> + ldo9_reg: ldo9 { >>>> + /* VDD_RTC */ >>>> + regulator-name = "ldo9"; >>>> + regulator-min-microvolt = <1050000>; >>>> + regulator-max-microvolt = <1050000>; >>>> + regulator-boot-on; >>>> + }; >>>> + >>>> + ldoln_reg: ldoln { >>>> + /* VDDA_1V8_PLL */ >>>> + regulator-name = "ldoln"; >>>> + regulator-min-microvolt = <1800000>; >>>> + regulator-max-microvolt = <1800000>; >>>> + regulator-always-on; >>>> + regulator-boot-on; >>>> + }; >>>> + >>>> + ldousb_reg: ldousb { >>>> + /* VDDA_3V_USB: VDDA_USBHS33 */ >>>> + regulator-name = "ldousb"; >>>> + regulator-min-microvolt = <3300000>; >>>> + regulator-max-microvolt = <3300000>; >>>> + regulator-boot-on; >>>> + }; >>>> + > Nit: Extra blank line not needed. > >>>> + }; >>>> + }; >>>> + }; >>>> }; > Nit: You have an extra level on indentation not needed. > >>>> &i2c2 { >>>> >>> Acked-by: Nishanth Menon <nm@ti.com> > Beside the two minors nits, the patch looks good to me. > > Since, you've been waiting for some time for it, I fixed it myself and pulled it. > I even fixed the changelog... Lucky you :-) > > You can check the updated version below. > > Sorry for the delay. > > Thanks, > Benoit > > --- > From 3b8f02a2df475c7a48e12eb1911c014f8060b167 Mon Sep 17 00:00:00 2001 > From: Keerthy <j-keerthy@ti.com> > Date: Mon, 26 Aug 2013 11:06:51 +0530 > Subject: [PATCH] ARM: DTS: DRA7: Add TPS659038 PMIC nodes > > Add DT nodes for TPS659038 PMIC on DRA7 boards. > > It is based on top of: > http://comments.gmane.org/gmane.linux.ports.arm.omap/102459. > > Documentation: > - Documentation/devicetree/bindings/mfd/palmas.txt > - Documentation/devicetree/bindings/regulator/palmas-pmic.txt > > Boot Tested on DRA7 d1 Board. > > Signed-off-by: Keerthy <j-keerthy@ti.com> > Acked-by: Nishanth Menon <nm@ti.com> > [bcousson@baylibre.com: Fix indentation and changelog] > Signed-off-by: Benoit Cousson <bcousson@baylibre.com> > --- > arch/arm/boot/dts/dra7-evm.dts | 112 +++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 112 insertions(+) > > diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts > index ca5dab2..fbbe406 100644 > --- a/arch/arm/boot/dts/dra7-evm.dts > +++ b/arch/arm/boot/dts/dra7-evm.dts > @@ -93,6 +93,118 @@ > pinctrl-names = "default"; > pinctrl-0 = <&i2c1_pins>; > clock-frequency = <400000>; > + > + tps659038: tps659038@58 { > + compatible = "ti,tps659038"; > + reg = <0x58>; > + > + tps659038_pmic { > + compatible = "ti,tps659038-pmic"; > + > + regulators { > + smps123_reg: smps123 { > + /* VDD_MPU */ > + regulator-name = "smps123"; > + regulator-min-microvolt = < 850000>; > + regulator-max-microvolt = <1250000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + smps45_reg: smps45 { > + /* VDD_DSPEVE */ > + regulator-name = "smps45"; > + regulator-min-microvolt = < 850000>; > + regulator-max-microvolt = <1150000>; > + regulator-boot-on; > + }; > + > + smps6_reg: smps6 { > + /* VDD_GPU - over VDD_SMPS6 */ > + regulator-name = "smps6"; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <12500000>; > + regulator-boot-on; > + }; > + > + smps7_reg: smps7 { > + /* CORE_VDD */ > + regulator-name = "smps7"; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <1030000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + smps8_reg: smps8 { > + /* VDD_IVAHD */ > + regulator-name = "smps8"; > + regulator-min-microvolt = < 850000>; > + regulator-max-microvolt = <1250000>; > + regulator-boot-on; > + }; > + > + smps9_reg: smps9 { > + /* VDDS1V8 */ > + regulator-name = "smps9"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo1_reg: ldo1 { > + /* LDO1_OUT --> SDIO */ > + regulator-name = "ldo1"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + }; > + > + ldo2_reg: ldo2 { > + /* VDD_RTCIO */ > + /* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */ > + regulator-name = "ldo2"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + }; > + > + ldo3_reg: ldo3 { > + /* VDDA_1V8_PHY */ > + regulator-name = "ldo3"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + }; > + > + ldo9_reg: ldo9 { > + /* VDD_RTC */ > + regulator-name = "ldo9"; > + regulator-min-microvolt = <1050000>; > + regulator-max-microvolt = <1050000>; > + regulator-boot-on; > + }; > + > + ldoln_reg: ldoln { > + /* VDDA_1V8_PLL */ > + regulator-name = "ldoln"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldousb_reg: ldousb { > + /* VDDA_3V_USB: VDDA_USBHS33 */ > + regulator-name = "ldousb"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + }; > + }; > + }; > + }; > }; > > &i2c2 { Looks good. Thanks once again.
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index ca5dab2..fbbe406 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -93,6 +93,118 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; clock-frequency = <400000>; + + tps659038: tps659038@58 { + compatible = "ti,tps659038"; + reg = <0x58>; + + tps659038_pmic { + compatible = "ti,tps659038-pmic"; + + regulators { + smps123_reg: smps123 { + /* VDD_MPU */ + regulator-name = "smps123"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps45_reg: smps45 { + /* VDD_DSPEVE */ + regulator-name = "smps45"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + }; + + smps6_reg: smps6 { + /* VDD_GPU - over VDD_SMPS6 */ + regulator-name = "smps6"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <12500000>; + regulator-boot-on; + }; + + smps7_reg: smps7 { + /* CORE_VDD */ + regulator-name = "smps7"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1030000>; + regulator-always-on; + regulator-boot-on; + }; + + smps8_reg: smps8 { + /* VDD_IVAHD */ + regulator-name = "smps8"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + }; + + smps9_reg: smps9 { + /* VDDS1V8 */ + regulator-name = "smps9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1_reg: ldo1 { + /* LDO1_OUT --> SDIO */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo2_reg: ldo2 { + /* VDD_RTCIO */ + /* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */ + regulator-name = "ldo2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo3_reg: ldo3 { + /* VDDA_1V8_PHY */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo9_reg: ldo9 { + /* VDD_RTC */ + regulator-name = "ldo9"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-boot-on; + }; + + ldoln_reg: ldoln { + /* VDDA_1V8_PLL */ + regulator-name = "ldoln"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldousb_reg: ldousb { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldousb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + }; + }; + }; }; &i2c2 {