| Message ID | 545d3aa6339c9e33060d651c42d652d0b848c06b.1512396054.git-series.quentin.schulz@free-electrons.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, 4 Dec 2017 15:12:51 +0100 Quentin Schulz <quentin.schulz@free-electrons.com> wrote: > The X-Powers AXP813 PMIC has got some slight differences from > AXP20X/AXP22X PMICs: > - the maximum voltage supplied by the PMIC is 4.35 instead of 4.36/4.24 > for AXP20X/AXP22X, > - the constant charge current formula is different, > > It also has a bit to tell whether the battery percentage returned by the > PMIC is valid. > > Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> I'd use switch statements when matching the IDs as that'll be more elegant as you perhaps add further devices going forward... Other than that, looks good to me. Jonathan > --- > drivers/power/supply/axp20x_battery.c | 44 +++++++++++++++++++++++++++- > 1 file changed, 43 insertions(+), 1 deletion(-) > > diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c > index 7494f0f..cb30302 100644 > --- a/drivers/power/supply/axp20x_battery.c > +++ b/drivers/power/supply/axp20x_battery.c > @@ -46,6 +46,8 @@ > #define AXP20X_CHRG_CTRL1_TGT_4_2V (2 << 5) > #define AXP20X_CHRG_CTRL1_TGT_4_36V (3 << 5) > > +#define AXP813_CHRG_CTRL1_TGT_4_35V (3 << 5) > + > #define AXP22X_CHRG_CTRL1_TGT_4_22V (1 << 5) > #define AXP22X_CHRG_CTRL1_TGT_4_24V (3 << 5) > > @@ -123,10 +125,41 @@ static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, > return 0; > } > > +static int axp813_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, > + int *val) > +{ > + int ret, reg; > + > + ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, ®); > + if (ret) > + return ret; > + > + switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) { You could do a lookup based from a table instead which might be ever so slightly more elegant.. > + case AXP20X_CHRG_CTRL1_TGT_4_1V: > + *val = 4100000; > + break; > + case AXP20X_CHRG_CTRL1_TGT_4_15V: > + *val = 4150000; > + break; > + case AXP20X_CHRG_CTRL1_TGT_4_2V: > + *val = 4200000; > + break; > + case AXP813_CHRG_CTRL1_TGT_4_35V: > + *val = 4350000; > + break; > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > static void raw_to_constant_charge_current(struct axp20x_batt_ps *axp, int *val) > { > if (axp->axp_id == AXP209_ID) > *val = *val * 100000 + 300000; > + else if (axp->axp_id == AXP813_ID) > + *val = *val * 200000 + 200000; > else > *val = *val * 150000 + 300000; Switch? > } > @@ -135,6 +168,8 @@ static void constant_charge_current_to_raw(struct axp20x_batt_ps *axp, int *val) > { > if (axp->axp_id == AXP209_ID) > *val = (*val - 300000) / 100000; > + else if (axp->axp_id == AXP813_ID) > + *val = (*val - 200000) / 200000; > else > *val = (*val - 300000) / 150000; > } > @@ -269,7 +304,8 @@ static int axp20x_battery_get_prop(struct power_supply *psy, > if (ret) > return ret; > > - if (axp20x_batt->axp_id == AXP221_ID && > + if ((axp20x_batt->axp_id == AXP221_ID || > + axp20x_batt->axp_id == AXP813_ID) && > !(reg & AXP22X_FG_VALID)) > return -EINVAL; > > @@ -284,6 +320,9 @@ static int axp20x_battery_get_prop(struct power_supply *psy, > if (axp20x_batt->axp_id == AXP209_ID) > return axp20x_battery_get_max_voltage(axp20x_batt, > &val->intval); > + else if (axp20x_batt->axp_id == AXP813_ID) > + return axp813_battery_get_max_voltage(axp20x_batt, > + &val->intval); > return axp22x_battery_get_max_voltage(axp20x_batt, > &val->intval); Worth converting to a switch statement to make it more elegant for future devices? > > @@ -467,6 +506,9 @@ static const struct of_device_id axp20x_battery_ps_id[] = { > }, { > .compatible = "x-powers,axp221-battery-power-supply", > .data = (void *)AXP221_ID, > + }, { > + .compatible = "x-powers,axp813-battery-power-supply", > + .data = (void *)AXP813_ID, > }, { /* sentinel */ }, > }; > MODULE_DEVICE_TABLE(of, axp20x_battery_ps_id);
Hi Jonathan, On 10/12/2017 17:49, Jonathan Cameron wrote: > On Mon, 4 Dec 2017 15:12:51 +0100 > Quentin Schulz <quentin.schulz@free-electrons.com> wrote: > >> The X-Powers AXP813 PMIC has got some slight differences from >> AXP20X/AXP22X PMICs: >> - the maximum voltage supplied by the PMIC is 4.35 instead of 4.36/4.24 >> for AXP20X/AXP22X, >> - the constant charge current formula is different, >> >> It also has a bit to tell whether the battery percentage returned by the >> PMIC is valid. >> >> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> > > I'd use switch statements when matching the IDs as that'll be more elegant > as you perhaps add further devices going forward... > > Other than that, looks good to me. > Well, I was wondering if it shouldn't be better to define a structure for each device containing their quirks, functions, etc... like it is done for the ADC or the ACIN power supply driver part. struct axp20x_data { bool has_valid_fg_reg; void constant_charge_current_to_raw(struct axp20x_batt_ps *axp, int *val); void raw_to_constant_charge_current(struct axp20x_batt_ps *axp, int *val); int get_max_voltage(struct axp20x_batt_ps *axp, int *val); [...] }; static const struct of_device_id axp20x_battery_ps_id[] = { { .compatible = "x-powers,axp209-battery-power-supply", .data = (void *)&axp209_data, }, {} }; void probe() { [...] axp20x_batt->info = of_device_get_match_data(&pdev->dev); [...] } Sebastian, any objection on doing this? Thanks, Quentin > Jonathan > >> --- >> drivers/power/supply/axp20x_battery.c | 44 +++++++++++++++++++++++++++- >> 1 file changed, 43 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c >> index 7494f0f..cb30302 100644 >> --- a/drivers/power/supply/axp20x_battery.c >> +++ b/drivers/power/supply/axp20x_battery.c >> @@ -46,6 +46,8 @@ >> #define AXP20X_CHRG_CTRL1_TGT_4_2V (2 << 5) >> #define AXP20X_CHRG_CTRL1_TGT_4_36V (3 << 5) >> >> +#define AXP813_CHRG_CTRL1_TGT_4_35V (3 << 5) >> + >> #define AXP22X_CHRG_CTRL1_TGT_4_22V (1 << 5) >> #define AXP22X_CHRG_CTRL1_TGT_4_24V (3 << 5) >> >> @@ -123,10 +125,41 @@ static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, >> return 0; >> } >> >> +static int axp813_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, >> + int *val) >> +{ >> + int ret, reg; >> + >> + ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, ®); >> + if (ret) >> + return ret; >> + >> + switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) { > > You could do a lookup based from a table instead which might > be ever so slightly more elegant.. > >> + case AXP20X_CHRG_CTRL1_TGT_4_1V: >> + *val = 4100000; >> + break; >> + case AXP20X_CHRG_CTRL1_TGT_4_15V: >> + *val = 4150000; >> + break; >> + case AXP20X_CHRG_CTRL1_TGT_4_2V: >> + *val = 4200000; >> + break; >> + case AXP813_CHRG_CTRL1_TGT_4_35V: >> + *val = 4350000; >> + break; >> + default: >> + return -EINVAL; >> + } >> + >> + return 0; >> +} >> + >> static void raw_to_constant_charge_current(struct axp20x_batt_ps *axp, int *val) >> { >> if (axp->axp_id == AXP209_ID) >> *val = *val * 100000 + 300000; >> + else if (axp->axp_id == AXP813_ID) >> + *val = *val * 200000 + 200000; >> else >> *val = *val * 150000 + 300000; > > Switch? > >> } >> @@ -135,6 +168,8 @@ static void constant_charge_current_to_raw(struct axp20x_batt_ps *axp, int *val) >> { >> if (axp->axp_id == AXP209_ID) >> *val = (*val - 300000) / 100000; >> + else if (axp->axp_id == AXP813_ID) >> + *val = (*val - 200000) / 200000; >> else >> *val = (*val - 300000) / 150000; >> } >> @@ -269,7 +304,8 @@ static int axp20x_battery_get_prop(struct power_supply *psy, >> if (ret) >> return ret; >> >> - if (axp20x_batt->axp_id == AXP221_ID && >> + if ((axp20x_batt->axp_id == AXP221_ID || >> + axp20x_batt->axp_id == AXP813_ID) && >> !(reg & AXP22X_FG_VALID)) >> return -EINVAL; >> >> @@ -284,6 +320,9 @@ static int axp20x_battery_get_prop(struct power_supply *psy, >> if (axp20x_batt->axp_id == AXP209_ID) >> return axp20x_battery_get_max_voltage(axp20x_batt, >> &val->intval); >> + else if (axp20x_batt->axp_id == AXP813_ID) >> + return axp813_battery_get_max_voltage(axp20x_batt, >> + &val->intval); >> return axp22x_battery_get_max_voltage(axp20x_batt, >> &val->intval); > > Worth converting to a switch statement to make it more elegant for future > devices? > >> >> @@ -467,6 +506,9 @@ static const struct of_device_id axp20x_battery_ps_id[] = { >> }, { >> .compatible = "x-powers,axp221-battery-power-supply", >> .data = (void *)AXP221_ID, >> + }, { >> + .compatible = "x-powers,axp813-battery-power-supply", >> + .data = (void *)AXP813_ID, >> }, { /* sentinel */ }, >> }; >> MODULE_DEVICE_TABLE(of, axp20x_battery_ps_id); >
On Mon, 11 Dec 2017 09:35:43 +0100 Quentin Schulz <quentin.schulz@free-electrons.com> wrote: > Hi Jonathan, > > On 10/12/2017 17:49, Jonathan Cameron wrote: > > On Mon, 4 Dec 2017 15:12:51 +0100 > > Quentin Schulz <quentin.schulz@free-electrons.com> wrote: > > > >> The X-Powers AXP813 PMIC has got some slight differences from > >> AXP20X/AXP22X PMICs: > >> - the maximum voltage supplied by the PMIC is 4.35 instead of 4.36/4.24 > >> for AXP20X/AXP22X, > >> - the constant charge current formula is different, > >> > >> It also has a bit to tell whether the battery percentage returned by the > >> PMIC is valid. > >> > >> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> > > > > I'd use switch statements when matching the IDs as that'll be more elegant > > as you perhaps add further devices going forward... > > > > Other than that, looks good to me. > > > > Well, I was wondering if it shouldn't be better to define a structure > for each device containing their quirks, functions, etc... like it is > done for the ADC or the ACIN power supply driver part. > Even better. > struct axp20x_data { > bool has_valid_fg_reg; > void constant_charge_current_to_raw(struct axp20x_batt_ps *axp, int *val); > void raw_to_constant_charge_current(struct axp20x_batt_ps *axp, int *val); > int get_max_voltage(struct axp20x_batt_ps *axp, int *val); > [...] > }; > > static const struct of_device_id axp20x_battery_ps_id[] = { > { .compatible = "x-powers,axp209-battery-power-supply", .data = (void > *)&axp209_data, }, {} > }; > > void probe() > { > [...] > axp20x_batt->info = of_device_get_match_data(&pdev->dev); > [...] > } > > Sebastian, any objection on doing this? > > Thanks, > Quentin > > > Jonathan > > > >> --- > >> drivers/power/supply/axp20x_battery.c | 44 +++++++++++++++++++++++++++- > >> 1 file changed, 43 insertions(+), 1 deletion(-) > >> > >> diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c > >> index 7494f0f..cb30302 100644 > >> --- a/drivers/power/supply/axp20x_battery.c > >> +++ b/drivers/power/supply/axp20x_battery.c > >> @@ -46,6 +46,8 @@ > >> #define AXP20X_CHRG_CTRL1_TGT_4_2V (2 << 5) > >> #define AXP20X_CHRG_CTRL1_TGT_4_36V (3 << 5) > >> > >> +#define AXP813_CHRG_CTRL1_TGT_4_35V (3 << 5) > >> + > >> #define AXP22X_CHRG_CTRL1_TGT_4_22V (1 << 5) > >> #define AXP22X_CHRG_CTRL1_TGT_4_24V (3 << 5) > >> > >> @@ -123,10 +125,41 @@ static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, > >> return 0; > >> } > >> > >> +static int axp813_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, > >> + int *val) > >> +{ > >> + int ret, reg; > >> + > >> + ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, ®); > >> + if (ret) > >> + return ret; > >> + > >> + switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) { > > > > You could do a lookup based from a table instead which might > > be ever so slightly more elegant.. > > > >> + case AXP20X_CHRG_CTRL1_TGT_4_1V: > >> + *val = 4100000; > >> + break; > >> + case AXP20X_CHRG_CTRL1_TGT_4_15V: > >> + *val = 4150000; > >> + break; > >> + case AXP20X_CHRG_CTRL1_TGT_4_2V: > >> + *val = 4200000; > >> + break; > >> + case AXP813_CHRG_CTRL1_TGT_4_35V: > >> + *val = 4350000; > >> + break; > >> + default: > >> + return -EINVAL; > >> + } > >> + > >> + return 0; > >> +} > >> + > >> static void raw_to_constant_charge_current(struct axp20x_batt_ps *axp, int *val) > >> { > >> if (axp->axp_id == AXP209_ID) > >> *val = *val * 100000 + 300000; > >> + else if (axp->axp_id == AXP813_ID) > >> + *val = *val * 200000 + 200000; > >> else > >> *val = *val * 150000 + 300000; > > > > Switch? > > > >> } > >> @@ -135,6 +168,8 @@ static void constant_charge_current_to_raw(struct axp20x_batt_ps *axp, int *val) > >> { > >> if (axp->axp_id == AXP209_ID) > >> *val = (*val - 300000) / 100000; > >> + else if (axp->axp_id == AXP813_ID) > >> + *val = (*val - 200000) / 200000; > >> else > >> *val = (*val - 300000) / 150000; > >> } > >> @@ -269,7 +304,8 @@ static int axp20x_battery_get_prop(struct power_supply *psy, > >> if (ret) > >> return ret; > >> > >> - if (axp20x_batt->axp_id == AXP221_ID && > >> + if ((axp20x_batt->axp_id == AXP221_ID || > >> + axp20x_batt->axp_id == AXP813_ID) && > >> !(reg & AXP22X_FG_VALID)) > >> return -EINVAL; > >> > >> @@ -284,6 +320,9 @@ static int axp20x_battery_get_prop(struct power_supply *psy, > >> if (axp20x_batt->axp_id == AXP209_ID) > >> return axp20x_battery_get_max_voltage(axp20x_batt, > >> &val->intval); > >> + else if (axp20x_batt->axp_id == AXP813_ID) > >> + return axp813_battery_get_max_voltage(axp20x_batt, > >> + &val->intval); > >> return axp22x_battery_get_max_voltage(axp20x_batt, > >> &val->intval); > > > > Worth converting to a switch statement to make it more elegant for future > > devices? > > > >> > >> @@ -467,6 +506,9 @@ static const struct of_device_id axp20x_battery_ps_id[] = { > >> }, { > >> .compatible = "x-powers,axp221-battery-power-supply", > >> .data = (void *)AXP221_ID, > >> + }, { > >> + .compatible = "x-powers,axp813-battery-power-supply", > >> + .data = (void *)AXP813_ID, > >> }, { /* sentinel */ }, > >> }; > >> MODULE_DEVICE_TABLE(of, axp20x_battery_ps_id); > > >
diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c index 7494f0f..cb30302 100644 --- a/drivers/power/supply/axp20x_battery.c +++ b/drivers/power/supply/axp20x_battery.c @@ -46,6 +46,8 @@ #define AXP20X_CHRG_CTRL1_TGT_4_2V (2 << 5) #define AXP20X_CHRG_CTRL1_TGT_4_36V (3 << 5) +#define AXP813_CHRG_CTRL1_TGT_4_35V (3 << 5) + #define AXP22X_CHRG_CTRL1_TGT_4_22V (1 << 5) #define AXP22X_CHRG_CTRL1_TGT_4_24V (3 << 5) @@ -123,10 +125,41 @@ static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, return 0; } +static int axp813_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, + int *val) +{ + int ret, reg; + + ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, ®); + if (ret) + return ret; + + switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) { + case AXP20X_CHRG_CTRL1_TGT_4_1V: + *val = 4100000; + break; + case AXP20X_CHRG_CTRL1_TGT_4_15V: + *val = 4150000; + break; + case AXP20X_CHRG_CTRL1_TGT_4_2V: + *val = 4200000; + break; + case AXP813_CHRG_CTRL1_TGT_4_35V: + *val = 4350000; + break; + default: + return -EINVAL; + } + + return 0; +} + static void raw_to_constant_charge_current(struct axp20x_batt_ps *axp, int *val) { if (axp->axp_id == AXP209_ID) *val = *val * 100000 + 300000; + else if (axp->axp_id == AXP813_ID) + *val = *val * 200000 + 200000; else *val = *val * 150000 + 300000; } @@ -135,6 +168,8 @@ static void constant_charge_current_to_raw(struct axp20x_batt_ps *axp, int *val) { if (axp->axp_id == AXP209_ID) *val = (*val - 300000) / 100000; + else if (axp->axp_id == AXP813_ID) + *val = (*val - 200000) / 200000; else *val = (*val - 300000) / 150000; } @@ -269,7 +304,8 @@ static int axp20x_battery_get_prop(struct power_supply *psy, if (ret) return ret; - if (axp20x_batt->axp_id == AXP221_ID && + if ((axp20x_batt->axp_id == AXP221_ID || + axp20x_batt->axp_id == AXP813_ID) && !(reg & AXP22X_FG_VALID)) return -EINVAL; @@ -284,6 +320,9 @@ static int axp20x_battery_get_prop(struct power_supply *psy, if (axp20x_batt->axp_id == AXP209_ID) return axp20x_battery_get_max_voltage(axp20x_batt, &val->intval); + else if (axp20x_batt->axp_id == AXP813_ID) + return axp813_battery_get_max_voltage(axp20x_batt, + &val->intval); return axp22x_battery_get_max_voltage(axp20x_batt, &val->intval); @@ -467,6 +506,9 @@ static const struct of_device_id axp20x_battery_ps_id[] = { }, { .compatible = "x-powers,axp221-battery-power-supply", .data = (void *)AXP221_ID, + }, { + .compatible = "x-powers,axp813-battery-power-supply", + .data = (void *)AXP813_ID, }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, axp20x_battery_ps_id);
The X-Powers AXP813 PMIC has got some slight differences from AXP20X/AXP22X PMICs: - the maximum voltage supplied by the PMIC is 4.35 instead of 4.36/4.24 for AXP20X/AXP22X, - the constant charge current formula is different, It also has a bit to tell whether the battery percentage returned by the PMIC is valid. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> --- drivers/power/supply/axp20x_battery.c | 44 +++++++++++++++++++++++++++- 1 file changed, 43 insertions(+), 1 deletion(-)