@@ -192,10 +192,6 @@
};
};
- spi0: spi@e0100000 {
- status = "okay";
- };
-
ehci@e4800000 {
status = "okay";
};
@@ -229,10 +225,6 @@
status = "okay";
};
- i2c1: i2c@5cd00000 {
- status = "okay";
- };
-
kbd@e0300000 {
linux,keymap = < 0x00000001
0x00010002
@@ -317,6 +309,7 @@
0x08080052 >;
autorepeat;
st,mode = <0>;
+ suspended_rate = <2000000>;
status = "okay";
};
@@ -328,6 +321,10 @@
status = "okay";
};
+ spi0: spi@e0100000 {
+ status = "okay";
+ };
+
wdt@ec800620 {
status = "okay";
};
@@ -82,13 +82,6 @@
status = "disabled";
};
- spi1: spi@5d400000 {
- compatible = "arm,pl022", "arm,primecell";
- reg = <0x5d400000 0x1000>;
- interrupts = <0 99 0x4>;
- status = "disabled";
- };
-
apb {
i2c1: i2c@5cd00000 {
#address-cells = <1>;
@@ -153,6 +146,13 @@
status = "disabled";
};
+ spi1: spi@5d400000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x5d400000 0x1000>;
+ interrupts = <0 99 0x4>;
+ status = "disabled";
+ };
+
serial@5c800000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x5c800000 0x1000>;
@@ -200,10 +200,6 @@
};
};
- spi0: spi@e0100000 {
- status = "okay";
- };
-
ehci@e4800000 {
status = "okay";
};
@@ -325,6 +321,7 @@
0x08080052 >;
autorepeat;
st,mode = <0>;
+ suspended_rate = <2000000>;
status = "okay";
};
@@ -340,6 +337,10 @@
status = "okay";
};
+ spi0: spi@e0100000 {
+ status = "okay";
+ };
+
wdt@ec800620 {
status = "okay";
};
@@ -52,6 +52,7 @@
compatible = "snps,designware-i2c";
reg = <0xb4000000 0x1000>;
interrupts = <0 104 0x4>;
+ write-16bit;
status = "disabled";
};
@@ -70,6 +70,8 @@
compatible = "simple-bus";
ranges = <0x50000000 0x50000000 0x10000000
0xb0000000 0xb0000000 0x10000000
+ 0xd0000000 0xd0000000 0x02000000
+ 0xd8000000 0xd8000000 0x01000000
0xe0000000 0xe0000000 0x10000000>;
sdhci@b3000000 {
@@ -81,7 +83,7 @@
cf@b2800000 {
compatible = "arasan,cf-spear1340";
- reg = <0xb2800000 0x100>;
+ reg = <0xb2800000 0x1000>;
interrupts = <0 29 0x4>;
status = "disabled";
};
@@ -113,6 +115,7 @@
0 23 0x4>;
st,ale-off = <0x20000>;
st,cle-off = <0x10000>;
+ st,mode = <2>;
status = "disabled";
};
@@ -134,17 +137,11 @@
status = "disabled";
};
- spi0: spi@e0100000 {
- compatible = "arm,pl022", "arm,primecell";
- reg = <0xe0100000 0x1000>;
- interrupts = <0 31 0x4>;
- status = "disabled";
- };
-
ehci@e4800000 {
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe4800000 0x1000>;
interrupts = <0 64 0x4>;
+ usbh0_id = <0>;
status = "disabled";
};
@@ -152,6 +149,7 @@
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe5800000 0x1000>;
interrupts = <0 66 0x4>;
+ usbh1_id = <1>;
status = "disabled";
};
@@ -159,6 +157,7 @@
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe4000000 0x1000>;
interrupts = <0 65 0x4>;
+ usbh0_id = <0>;
status = "disabled";
};
@@ -166,6 +165,7 @@
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe5000000 0x1000>;
interrupts = <0 67 0x4>;
+ usbh1_id = <1>;
status = "disabled";
};
@@ -175,6 +175,8 @@
compatible = "simple-bus";
ranges = <0x50000000 0x50000000 0x10000000
0xb0000000 0xb0000000 0x10000000
+ 0xd0000000 0xd0000000 0x02000000
+ 0xd8000000 0xd8000000 0x01000000
0xe0000000 0xe0000000 0x10000000>;
gpio0: gpio@e0600000 {
@@ -215,8 +217,15 @@
status = "disabled";
};
+ spi0: spi@e0100000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0xe0100000 0x1000>;
+ interrupts = <0 31 0x4>;
+ status = "disabled";
+ };
+
rtc@e0580000 {
- compatible = "st,spear-rtc";
+ compatible = "st,spear600-rtc";
reg = <0xe0580000 0x1000>;
interrupts = <0 36 0x4>;
status = "disabled";
@@ -232,7 +241,7 @@
adc@e0080000 {
compatible = "st,spear600-adc";
reg = <0xe0080000 0x1000>;
- interrupts = <0 44 0x4>;
+ interrupts = <0 12 0x4>;
status = "disabled";
};
@@ -245,7 +254,8 @@
timer@ec800600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xec800600 0x20>;
- interrupts = <1 13 0x301>;
+ interrupts = <1 13 0x4>;
+ status = "disabled";
};
wdt@ec800620 {
@@ -257,6 +267,7 @@
thermal@e07008c4 {
compatible = "st,thermal-spear1340";
reg = <0xe07008c4 0x4>;
+ thermal_flags = <0x7000>;
};
};
};
@@ -27,7 +27,7 @@
};
clcd@60000000 {
- compatible = "arm,clcd-pl110", "arm,primecell";
+ compatible = "arm,pl110", "arm,primecell";
reg = <0x60000000 0x1000>;
interrupts = <30>;
status = "disabled";
@@ -82,10 +82,6 @@
};
};
- clcd@90000000 {
- status = "okay";
- };
-
dma@fc400000 {
status = "okay";
};
@@ -99,6 +95,7 @@
};
sdhci@70000000 {
+ power-gpio = <&gpiopinctrl 61 1>;
status = "okay";
};
@@ -27,7 +27,7 @@
};
clcd@90000000 {
- compatible = "arm,clcd-pl110", "arm,primecell";
+ compatible = "arm,pl110", "arm,primecell";
reg = <0x90000000 0x1000>;
interrupts = <33>;
status = "disabled";
@@ -68,7 +68,7 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
- ranges = <0xa0000000 0xa0000000 0x10000000
+ ranges = <0xa0000000 0xa0000000 0x20000000
0xd0000000 0xd0000000 0x30000000>;
i2c1: i2c@a7000000 {
@@ -120,7 +120,7 @@
};
rtc@fc900000 {
- compatible = "st,spear-rtc";
+ compatible = "st,spear600-rtc";
reg = <0xfc900000 0x1000>;
interrupts = <10>;
status = "disabled";