From patchwork Mon Aug 17 21:58:01 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Petr Cvek X-Patchwork-Id: 7027401 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id 66792C05AC for ; Mon, 17 Aug 2015 21:57:25 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 1A18920504 for ; Mon, 17 Aug 2015 21:57:24 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.9]) (using TLSv1.2 with cipher AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id C02D02047D for ; Mon, 17 Aug 2015 21:57:22 +0000 (UTC) Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1ZRSNS-0005GN-NZ; Mon, 17 Aug 2015 21:55:34 +0000 Received: from bubo.tul.cz ([2001:718:1c01:16::aa]) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1ZRSNO-0004zt-TZ for linux-arm-kernel@lists.infradead.org; Mon, 17 Aug 2015 21:55:32 +0000 Received: from [78.80.185.17] (78-80-185-17.tmcz.cz [78.80.185.17]) (using TLSv1 with cipher DHE-RSA-AES128-SHA (128/128 bits)) (No client certificate requested) by bubo.tul.cz (Postfix) with ESMTPSA id E02DF1F000D; Mon, 17 Aug 2015 23:54:45 +0200 (CEST) From: Petr Cvek Subject: [PATCH v2 04/21] ARM: pxa: magician: Add, fix and init (new) GPIOs To: robert.jarzmik@free.fr, philipp.zabel@gmail.com, daniel@zonque.org, haojian.zhuang@gmail.com, sameo@linux.intel.com, lee.jones@linaro.org, cooloney@gmail.com, rpurdie@rpsys.net, j.anaszewski@samsung.com, linux@arm.linux.org.uk, sre@kernel.org, dbaryshkov@gmail.com, dwmw2@infradead.org References: Message-ID: <55D258E9.9010303@tul.cz> Date: Mon, 17 Aug 2015 23:58:01 +0200 User-Agent: Mozilla/5.0 (X11; Linux i686; rv:38.0) Gecko/20100101 Thunderbird/38.2.0 MIME-Version: 1.0 In-Reply-To: X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20150817_145531_675754_157152C0 X-CRM114-Status: GOOD ( 16.33 ) X-Spam-Score: -2.5 (--) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: linux-arm-kernel@lists.infradead.org, linux-leds@vger.kernel.org, linux-pm@vger.kernel.org Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Spam-Status: No, score=-4.8 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_MED, RP_MATCHES_RCVD, UNPARSEABLE_RELAY, UPPERCASE_50_75 autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Add new GPIOs, fix some GPIO names and initialization (EGPIO, LCD power on sequence). Signed-off-by: Petr Cvek --- arch/arm/mach-pxa/include/mach/magician.h | 39 ++++--- arch/arm/mach-pxa/magician.c | 166 +++++++++++++++++++++++------- 2 files changed, 153 insertions(+), 52 deletions(-) diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h index ba6a6e1..d19e504 100644 --- a/arch/arm/mach-pxa/include/mach/magician.h +++ b/arch/arm/mach-pxa/include/mach/magician.h @@ -21,10 +21,10 @@ #define GPIO0_MAGICIAN_KEY_POWER 0 #define GPIO9_MAGICIAN_UNKNOWN 9 -#define GPIO10_MAGICIAN_GSM_IRQ 10 +#define GPIO10_MAGICIAN_GSM_IRQ 10 #define GPIO11_MAGICIAN_GSM_OUT1 11 #define GPIO13_MAGICIAN_CPLD_IRQ 13 -#define GPIO18_MAGICIAN_UNKNOWN 18 +#define GPIO18_MAGICIAN_UNKNOWN 18 #define GPIO22_MAGICIAN_VIBRA_EN 22 #define GPIO26_MAGICIAN_GSM_POWER 26 #define GPIO27_MAGICIAN_USBC_PUEN 27 @@ -32,8 +32,10 @@ #define GPIO37_MAGICIAN_KEY_HANGUP 37 #define GPIO38_MAGICIAN_KEY_CONTACTS 38 #define GPIO40_MAGICIAN_GSM_OUT2 40 -#define GPIO48_MAGICIAN_UNKNOWN 48 -#define GPIO56_MAGICIAN_UNKNOWN 56 +#define GPIO46_MAGICIAN_IR_RX 46 +#define GPIO47_MAGICIAN_IR_TX 47 +#define GPIO48_MAGICIAN_UNKNOWN 48 +#define GPIO56_MAGICIAN_UNKNOWN 56 #define GPIO57_MAGICIAN_CAM_RESET 57 #define GPIO75_MAGICIAN_SAMSUNG_POWER 75 #define GPIO83_MAGICIAN_nIR_EN 83 @@ -51,15 +53,17 @@ #define GPIO100_MAGICIAN_KEY_VOL_UP 100 #define GPIO101_MAGICIAN_KEY_VOL_DOWN 101 #define GPIO102_MAGICIAN_KEY_PHONE 102 -#define GPIO103_MAGICIAN_LED_KP 103 -#define GPIO104_MAGICIAN_LCD_POWER_1 104 -#define GPIO105_MAGICIAN_LCD_POWER_2 105 -#define GPIO106_MAGICIAN_LCD_POWER_3 106 +#define GPIO103_MAGICIAN_LED_KP 103 +#define GPIO104_MAGICIAN_LCD_VOFF_EN 104 +#define GPIO105_MAGICIAN_LCD_VON_EN 105 +#define GPIO106_MAGICIAN_LCD_DCDC_NRESET 106 #define GPIO107_MAGICIAN_DS1WM_IRQ 107 #define GPIO108_MAGICIAN_GSM_READY 108 #define GPIO114_MAGICIAN_UNKNOWN 114 #define GPIO115_MAGICIAN_nPEN_IRQ 115 #define GPIO116_MAGICIAN_nCAM_EN 116 +#define GPIO117_MAGICIAN_I2C_SCL 117 +#define GPIO118_MAGICIAN_I2C_SDA 118 #define GPIO119_MAGICIAN_UNKNOWN 119 #define GPIO120_MAGICIAN_UNKNOWN 120 @@ -78,7 +82,7 @@ * CPLD EGPIOs */ -#define MAGICIAN_EGPIO_BASE PXA_NR_BUILTIN_GPIO +#define MAGICIAN_EGPIO_BASE PXA_NR_BUILTIN_GPIO #define MAGICIAN_EGPIO(reg,bit) \ (MAGICIAN_EGPIO_BASE + 8*reg + bit) @@ -89,25 +93,28 @@ #define EGPIO_MAGICIAN_GSM_RESET MAGICIAN_EGPIO(0, 6) #define EGPIO_MAGICIAN_LCD_POWER MAGICIAN_EGPIO(0, 7) #define EGPIO_MAGICIAN_SPK_POWER MAGICIAN_EGPIO(1, 0) -#define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1) +#define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1) #define EGPIO_MAGICIAN_IN_SEL0 MAGICIAN_EGPIO(1, 2) #define EGPIO_MAGICIAN_IN_SEL1 MAGICIAN_EGPIO(1, 3) #define EGPIO_MAGICIAN_MIC_POWER MAGICIAN_EGPIO(1, 4) #define EGPIO_MAGICIAN_CODEC_RESET MAGICIAN_EGPIO(1, 5) #define EGPIO_MAGICIAN_CODEC_POWER MAGICIAN_EGPIO(1, 6) -#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7) -#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0) +#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7) +#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0) #define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1) -#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2) +#define EGPIO_MAGICIAN_IR_RECEIVE_SHUTDOWN MAGICIAN_EGPIO(2, 2) #define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3) #define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4) #define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5) +#define EGPIO_MAGICIAN_NICD_CHARGE MAGICIAN_EGPIO(2, 6) #define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7) /* input */ -#define EGPIO_MAGICIAN_CABLE_STATE_AC MAGICIAN_EGPIO(4, 0) -#define EGPIO_MAGICIAN_CABLE_STATE_USB MAGICIAN_EGPIO(4, 1) +/* AC=1, USB=0 */ +#define EGPIO_MAGICIAN_CABLE_TYPE MAGICIAN_EGPIO(4, 0) +/* =1 when AC or USB cable inserted */ +#define EGPIO_MAGICIAN_CABLE_INSERT1 MAGICIAN_EGPIO(4, 1) #define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0) #define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1) @@ -116,5 +123,7 @@ #define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4) #define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1) +/* FIXME behave like 4,1, may differ for host/device */ +#define EGPIO_MAGICIAN_CABLE_INSERT2 MAGICIAN_EGPIO(6, 4) #endif /* _MAGICIAN_H_ */ diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 57da133..bc206f8 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -4,8 +4,9 @@ * and T-Mobile MDA Compact. * * Copyright (c) 2006-2007 Philipp Zabel + * Copyright (c) 2014-2015 Petr Cvek (massive rework) * - * Based on hx4700.c, spitz.c and others. + * Based on hx4700.c, spitz.c, board-overo.c and others. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -96,13 +97,24 @@ static unsigned long magician_pin_config[] __initdata = { GPIO79_nCS_3, /* EGPIO CPLD */ GPIO80_nCS_4, GPIO33_nCS_5, + GPIO49_nPWE, + GPIO18_RDY, /* I2C UDA1380 + OV9640 */ GPIO117_I2C_SCL, GPIO118_I2C_SDA, + /* Omnivision camera power and reset GPIO */ + MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH), /* nEnable, active in low */ + MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH), /* Reset, active in high */ + +#if IS_ENABLED(CONFIG_PWM_PXA) /* PWM 0 - LCD backlight */ GPIO16_PWM0_OUT, +#else + /* Ensure static backlight without any driver */ + MFP_CFG_OUT(GPIO16, AF0, DRIVE_LOW), /* Backlight enabled */ +#endif /* I2S UDA1380 capture */ GPIO28_I2S_BITCLK_OUT, @@ -129,8 +141,26 @@ static unsigned long magician_pin_config[] __initdata = { GPIO111_MMC_DAT_3, GPIO112_MMC_CMD, - /* LCD */ - GPIOxx_LCD_TFT_16BPP, + /* + * LCD + * NOTICE Samsung LTP280QV: + * cannot use GPIOxx_LCD_TFT_16BPP, GPIO75 is LCD power, + * 74 unused (AF0 by bootloader?) + */ + GPIOxx_LCD_16BPP, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, /* data_valid (v/hsync) (ADS7846 sync?) */ + + /* NOTICE valid LCD init sequence */ + + /* for GPIO75_MAGICIAN_SAMSUNG_POWER */ + MFP_CFG_OUT(GPIO75, AF0, DRIVE_HIGH), + /* for GPIO106_MAGICIAN_LCD_DCDC_NRESET */ + MFP_CFG_OUT(GPIO106, AF0, DRIVE_HIGH), + /* for GPIO104_MAGICIAN_LCD_VOFF_EN */ + MFP_CFG_OUT(GPIO104, AF0, DRIVE_HIGH), + /* for GPIO105_MAGICIAN_LCD_VON_EN */ + MFP_CFG_OUT(GPIO105, AF0, DRIVE_HIGH), /* QCI camera interface */ GPIO12_CIF_DD_7, @@ -147,16 +177,69 @@ static unsigned long magician_pin_config[] __initdata = { GPIO85_CIF_LV, /* Magician specific input GPIOs */ - GPIO9_GPIO, /* unknown */ GPIO10_GPIO, /* GSM_IRQ */ GPIO13_GPIO, /* CPLD_IRQ */ GPIO107_GPIO, /* DS1WM_IRQ */ GPIO108_GPIO, /* GSM_READY */ GPIO115_GPIO, /* nPEN_IRQ */ - /* I2C */ - GPIO117_I2C_SCL, - GPIO118_I2C_SDA, + /* FIXME: probably IrDA transmitter disable */ + MFP_CFG_OUT(GPIO83, AF0, DRIVE_HIGH), + + /* Vibration motor */ + MFP_CFG_OUT(GPIO22, AF0, DRIVE_LOW), + + /* Keypad LEDs (red/green phone) */ + MFP_CFG_OUT(GPIO103, AF0, DRIVE_LOW), + + /* GSM pins */ + MFP_CFG_OUT(GPIO11, AF0, DRIVE_LOW), /* CPU is unavailable(?) */ + MFP_CFG_OUT(GPIO26, AF0, DRIVE_LOW), /* GSM power, active high */ + MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH), /* GSM reset, active high */ + + /* USB connector */ + MFP_CFG_OUT(GPIO27, AF0, DRIVE_LOW), /* usbc pull-up enable */ + MFP_CFG_OUT(GPIO30, AF0, DRIVE_LOW), /* charging enable, active low */ + + /* FFUART, FIXME never observed to do something, GSM data? */ + GPIO34_FFUART_RXD, + GPIO35_FFUART_CTS, + GPIO36_FFUART_DCD, + GPIO39_FFUART_TXD, + GPIO41_FFUART_RTS, + + /* BTUART, AT commands/data, HTC port line discipline */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + GPIO45_BTUART_RTS, + + /* Power I2C, enabled controller will overrule GPIO */ + GPIO3_GPIO, /* SCL */ + GPIO4_GPIO, /* SDA */ + + /* IrDA GPIOs, if pxaficp, it will change AF accordingly to mode */ + MFP_CFG_IN(GPIO46, AF0), + MFP_CFG_OUT(GPIO47, AF0, DRIVE_LOW), + MFP_CFG_OUT(GPIO83, AF0, DRIVE_HIGH), + + /* TODO unknown */ + GPIO9_GPIO, /* unknown */ + MFP_CFG_OUT(GPIO40, AF0, DRIVE_LOW), /* FIXME GSM? */ + MFP_CFG_OUT(GPIO87, AF0, DRIVE_LOW), /* FIXME GSM? */ + + /* Left GPIOs (undefined here): + * 18, 49 : bootloader=VLIO?, WinM=TODO + * 48 : AF0/out0 + * 56 : AF0/out0 + * 74 : bootloader=AF0/output + * 86 : bootloader=AF0/input (but should be gsm reset???) + * 114 : AF0/out0 + * 119 : AF0/out0 + * 120 : AF0/out + * 1 : dedicated reset, AF0/output + * 13 : cpld irq, output (??) + */ }; /* @@ -241,8 +324,9 @@ static struct htc_egpio_chip egpio_chips[] = { /* * Depends on modules configuration + * Things like MMC and LCD should be enabled */ - .initial_values = 0x40, + .initial_values = 0x21a0c0, }, [1] = { .reg_start = 4, @@ -314,22 +398,22 @@ static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si) if (on) { gpio_set_value(EGPIO_MAGICIAN_TOPPOLY_POWER, 1); - gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1); + gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1); udelay(2000); gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1); udelay(2000); /* FIXME: enable LCDC here */ udelay(2000); - gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1); + gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1); udelay(2000); - gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1); + gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1); } else { mdelay(15); - gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0); + gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0); udelay(500); - gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0); + gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0); udelay(1000); - gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0); + gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0); gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0); } } @@ -343,21 +427,19 @@ static void samsung_lcd_power(int on, struct fb_var_screeninfo *si) gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 1); else gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1); - mdelay(10); - gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1); - mdelay(10); - gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1); - mdelay(30); - gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1); - mdelay(10); + mdelay(6); + gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1); + mdelay(6); /* Avdd -> Voff >5ms */ + gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1); + mdelay(16); /* Voff -> Von >(5+10)ms */ + gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1); } else { - mdelay(10); - gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0); - mdelay(30); - gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0); - mdelay(10); - gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0); - mdelay(10); + gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0); + mdelay(16); + gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0); + mdelay(6); + gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0); + mdelay(6); if (system_rev < 3) gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 0); else @@ -555,7 +637,7 @@ static struct resource gpio_vbus_resource = { static struct gpio_vbus_mach_info gpio_vbus_info = { .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN, - .gpio_vbus = EGPIO_MAGICIAN_CABLE_STATE_USB, + .gpio_vbus = EGPIO_MAGICIAN_CABLE_INSERT1, }; static struct platform_device gpio_vbus = { @@ -574,17 +656,17 @@ static struct platform_device gpio_vbus = { static int power_supply_init(struct device *dev) { - return gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC"); + return gpio_request(EGPIO_MAGICIAN_CABLE_TYPE, "CABLE_STATE_AC"); } static int magician_is_ac_online(void) { - return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC); + return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERT1); } static void power_supply_exit(struct device *dev) { - gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC); + gpio_free(EGPIO_MAGICIAN_CABLE_TYPE); } static char *magician_supplicants[] = { @@ -774,12 +856,21 @@ static struct platform_device *devices[] __initdata = { &leds_gpio, }; +/* + * Global GPIOs + */ + static struct gpio magician_global_gpios[] = { - { GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" }, - { GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" }, - { GPIO104_MAGICIAN_LCD_POWER_1, GPIOF_OUT_INIT_LOW, "LCD power 1" }, - { GPIO105_MAGICIAN_LCD_POWER_2, GPIOF_OUT_INIT_LOW, "LCD power 2" }, - { GPIO106_MAGICIAN_LCD_POWER_3, GPIOF_OUT_INIT_LOW, "LCD power 3" }, + { GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" }, + { GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" }, + + /* NOTICE valid LCD init sequence */ + { GPIO106_MAGICIAN_LCD_DCDC_NRESET, GPIOF_OUT_INIT_HIGH, + "LCD DCDC nreset" }, + { GPIO104_MAGICIAN_LCD_VOFF_EN, GPIOF_OUT_INIT_HIGH, + "LCD VOFF enable" }, + { GPIO105_MAGICIAN_LCD_VON_EN, GPIOF_OUT_INIT_HIGH, + "LCD VON enable" }, { GPIO83_MAGICIAN_nIR_EN, GPIOF_OUT_INIT_HIGH, "nIR_EN" }, }; @@ -817,6 +908,7 @@ static void __init magician_init(void) lcd_select = board_id & 0x8; pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly"); if (lcd_select && (system_rev < 3)) + /* NOTICE valid LCD init sequence */ gpio_request_one(GPIO75_MAGICIAN_SAMSUNG_POWER, GPIOF_OUT_INIT_LOW, "Samsung LCD Power"); pxa_set_fb_info(NULL,