| Message ID | 55D25ABC.1000405@tul.cz (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, 18 Aug 2015, Petr Cvek wrote: > Fix register definitions and prepare structures for new leds-pasic3 > driver. > > Signed-off-by: Petr Cvek <petr.cvek@tul.cz> > --- > drivers/mfd/htc-pasic3.c | 54 ++++++++++++++++----------- > include/linux/mfd/htc-pasic3.h | 85 +++++++++++++++++++++++++++++++----------- > 2 files changed, 97 insertions(+), 42 deletions(-) > > diff --git a/drivers/mfd/htc-pasic3.c b/drivers/mfd/htc-pasic3.c > index e88d4f6..16e156d 100644 > --- a/drivers/mfd/htc-pasic3.c > +++ b/drivers/mfd/htc-pasic3.c > @@ -3,6 +3,9 @@ > * > * Copyright (C) 2006 Philipp Zabel <philipp.zabel@gmail.com> > * > + * 2015: Added registers for LED and RESET, see htc-pasic3.h > + * -- Petr Cvek > + * This is pretty unconventional. Please look to see what others have done. > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License as published by > * the Free Software Foundation; version 2 of the License. > @@ -21,15 +24,10 @@ > #include <linux/mfd/htc-pasic3.h> > #include <linux/slab.h> > > -struct pasic3_data { > - void __iomem *mapping; > - unsigned int bus_shift; > -}; > - > #define REG_ADDR 5 > #define REG_DATA 6 > > -#define READ_MODE 0x80 > +#define READ_MODE BIT(7) > > /* > * write to a secondary register on the PASIC3 > @@ -76,24 +74,36 @@ static struct mfd_cell led_cell __initdata = { > static int ds1wm_enable(struct platform_device *pdev) > { > struct device *dev = pdev->dev.parent; > - int c; > + struct pasic3_data *asic = platform_get_drvdata(pdev); > + unsigned long flags; > + u8 c; > + > + spin_lock_irqsave(&asic->lock, flags); > + > + c = pasic3_read_register(dev, PASIC3_GPIO); > + pasic3_write_register(dev, PASIC3_GPIO, c & ~DS1WM_NEN); > > - c = pasic3_read_register(dev, 0x28); > - pasic3_write_register(dev, 0x28, c & 0x7f); > + spin_unlock_irqrestore(&asic->lock, flags); > > - dev_dbg(dev, "DS1WM OWM_EN low (active) %02x\n", c & 0x7f); > + dev_dbg(dev, "DS1WM OWM_EN low (active) %02lx\n", c & ~DS1WM_NEN); > return 0; > } > > static int ds1wm_disable(struct platform_device *pdev) > { > struct device *dev = pdev->dev.parent; > - int c; > + struct pasic3_data *asic = platform_get_drvdata(pdev); > + unsigned long flags; > + u8 c; > + > + spin_lock_irqsave(&asic->lock, flags); > + > + c = pasic3_read_register(dev, PASIC3_GPIO); > + pasic3_write_register(dev, PASIC3_GPIO, c | DS1WM_NEN); > > - c = pasic3_read_register(dev, 0x28); > - pasic3_write_register(dev, 0x28, c | 0x80); > + spin_unlock_irqrestore(&asic->lock, flags); > > - dev_dbg(dev, "DS1WM OWM_EN high (inactive) %02x\n", c | 0x80); > + dev_dbg(dev, "DS1WM OWM_EN high (inactive) %02lx\n", c | DS1WM_NEN); > return 0; > } > > @@ -130,6 +140,7 @@ static int __init pasic3_probe(struct platform_device *pdev) > struct device *dev = &pdev->dev; > struct pasic3_data *asic; > struct resource *r; > + struct pasic3_leds_pdata *leds_pdata; > int ret; > int irq = 0; > > @@ -162,6 +173,8 @@ static int __init pasic3_probe(struct platform_device *pdev) > /* calculate bus shift from mem resource */ > asic->bus_shift = (resource_size(r) - 5) >> 3; > > + spin_lock_init(&asic->lock); > + > if (pdata && pdata->clock_rate) { > ds1wm_pdata.clock_rate = pdata->clock_rate; > /* the first 5 PASIC3 registers control the DS1WM */ > @@ -172,13 +185,12 @@ static int __init pasic3_probe(struct platform_device *pdev) > dev_warn(dev, "failed to register DS1WM\n"); > } > > - if (pdata && pdata->led_pdata) { > - led_cell.platform_data = pdata->led_pdata; > - led_cell.pdata_size = sizeof(struct pasic3_leds_machinfo); > - ret = mfd_add_devices(&pdev->dev, pdev->id, &led_cell, 1, r, > - 0, NULL); > - if (ret < 0) > - dev_warn(dev, "failed to register LED device\n"); > + if (pdata && pdata->pasic3_leds) { > + leds_pdata = dev_get_platdata(&pdata->pasic3_leds->dev); Whoa! You're passing a pointer to a device through pdata? I don't like that at all. Please explain. > + if (leds_pdata) { > + leds_pdata->mfd_dev = dev; > + platform_device_register(pdata->pasic3_leds); What's the idea here? > + } > } > > return 0; > diff --git a/include/linux/mfd/htc-pasic3.h b/include/linux/mfd/htc-pasic3.h > index 3d3ed67..91a27b6 100644 > --- a/include/linux/mfd/htc-pasic3.h > +++ b/include/linux/mfd/htc-pasic3.h > @@ -2,6 +2,7 @@ > * HTC PASIC3 driver - LEDs and DS1WM > * > * Copyright (c) 2007 Philipp Zabel <philipp.zabel@gmail.com> > + * Copyright (c) 2015 Petr Cvek <petr.cvek@tul.cz> > * > * This file is subject to the terms and conditions of the GNU General Public > * License. See the file COPYING in the main directory of this archive for > @@ -18,37 +19,79 @@ > extern void pasic3_write_register(struct device *dev, u32 reg, u8 val); > extern u8 pasic3_read_register(struct device *dev, u32 reg); > > -/* > - * mask for registers 0x20,0x21,0x22 > - */ > -#define PASIC3_MASK_LED0 0x04 > -#define PASIC3_MASK_LED1 0x08 > -#define PASIC3_MASK_LED2 0x40 > +#define PASIC3_CH0_DELAY_ON 0x00 > +#define PASIC3_CH0_DELAY_OFF 0x01 > +#define PASIC3_CH1_DELAY_ON 0x02 > +#define PASIC3_CH1_DELAY_OFF 0x03 > +#define PASIC3_CH2_DELAY_ON 0x04 > +#define PASIC3_CH2_DELAY_OFF 0x05 > +#define PASIC3_DELAY_MASK 0x7f > + > +#define PASIC3_CH_CONTROL 0x06 > +#define R06_CH0_EN BIT(0) > +#define R06_CH1_EN BIT(1) > +#define R06_CH2_EN BIT(2) > +#define R06_CH0_FORCE_ON BIT(3) > +#define R06_CH1_FORCE_ON BIT(4) > +#define R06_CH2_FORCE_ON BIT(5) > > /* > - * bits in register 0x06 > + * pwm_ch0_out | force_on | (bit0 & bit1 & bit2) > + * pwm_ch1_out | force_on | (bit0 & bit1 & bit2) > + * pwm_ch2_out | force_on | (bit2?bit0:(bit0 & ! bit1)) Please space this out properly. > */ > -#define PASIC3_BIT2_LED0 0x08 > -#define PASIC3_BIT2_LED1 0x10 > -#define PASIC3_BIT2_LED2 0x20 > + > +#define PASIC3_MASK_A 0x20 > +#define PASIC3_MASK_B 0x21 > +#define PASIC3_MASK_C 0x22 > +#define MASK_CH0 BIT(2) > +#define MASK_CH1 BIT(3) > +#define MASK_CH2 BIT(6) > +#define PASIC3_GPIO 0x28 > +#define DS1WM_NEN BIT(7) > +#define PASIC3_SYS 0x2a > + > +/* NORMAL_RST, CAM_PWR_RST and UNKNOWN will autoclear, set STATUS */ > +#define NORMAL_RST BIT(0) > +#define CAM_PWR_RST BIT(1) > +#define UNKNOWN BIT(2) > +#define STATUS_NORMAL_RST BIT(4) > +#define STATUS_CAM_PWR_RST BIT(5) > +#define STATUS_UNKNOWN BIT(6) > + > +/* FIXME/TODO reset sources */ > +#define PASIC3_RST_EN 0x2c > +#define EN_NORMAL_RST 0x40 > +#define EN_DOOR_RST 0x42 > > struct pasic3_led { > - struct led_classdev led; > - unsigned int hw_num; > - unsigned int bit2; > - unsigned int mask; > - struct pasic3_leds_machinfo *pdata; > + char name[24]; > + char default_trigger[80]; > + int hw_num; > + u8 bit_blink_en; > + u8 bit_force_on; > + u8 bit_mask; > + u8 reg_delay_on; > + u8 reg_delay_off; > }; > > -struct pasic3_leds_machinfo { > - unsigned int num_leds; > - unsigned int power_gpio; > +struct pasic3_leds_pdata { > struct pasic3_led *leds; > + int num_leds; > + int power_gpio; > + int power_gpio_users; > + struct device *mfd_dev; > }; > > -struct pasic3_platform_data { > - struct pasic3_leds_machinfo *led_pdata; > - unsigned int clock_rate; > +struct pasic3_data { > + void __iomem *mapping; > + unsigned int bus_shift; > + spinlock_t lock; > }; > > +struct pasic3_platform_data { > + unsigned int clock_rate; > + struct pasic3_led *leds; > + struct platform_device *pasic3_leds; > +}; If you can separate these with a TAB like the rest of the file, that would be preferred. > #endif
Dne 18.8.2015 v 08:52 Lee Jones napsal(a): > On Tue, 18 Aug 2015, Petr Cvek wrote: > >> Fix register definitions and prepare structures for new leds-pasic3 >> driver. >> >> Signed-off-by: Petr Cvek <petr.cvek@tul.cz> >> --- >> drivers/mfd/htc-pasic3.c | 54 ++++++++++++++++----------- >> include/linux/mfd/htc-pasic3.h | 85 +++++++++++++++++++++++++++++++----------- >> 2 files changed, 97 insertions(+), 42 deletions(-) >> >> diff --git a/drivers/mfd/htc-pasic3.c b/drivers/mfd/htc-pasic3.c >> index e88d4f6..16e156d 100644 >> --- a/drivers/mfd/htc-pasic3.c >> +++ b/drivers/mfd/htc-pasic3.c >> @@ -3,6 +3,9 @@ >> * >> * Copyright (C) 2006 Philipp Zabel <philipp.zabel@gmail.com> >> * >> + * 2015: Added registers for LED and RESET, see htc-pasic3.h >> + * -- Petr Cvek >> + * > > This is pretty unconventional. > > Please look to see what others have done. LED support: Petr Cvek <petr.cvek@tul.cz> OK? >> @@ -130,6 +140,7 @@ static int __init pasic3_probe(struct platform_device *pdev) >> struct device *dev = &pdev->dev; >> struct pasic3_data *asic; >> struct resource *r; >> + struct pasic3_leds_pdata *leds_pdata; >> int ret; >> int irq = 0; >> >> @@ -162,6 +173,8 @@ static int __init pasic3_probe(struct platform_device *pdev) >> /* calculate bus shift from mem resource */ >> asic->bus_shift = (resource_size(r) - 5) >> 3; >> >> + spin_lock_init(&asic->lock); >> + >> if (pdata && pdata->clock_rate) { >> ds1wm_pdata.clock_rate = pdata->clock_rate; >> /* the first 5 PASIC3 registers control the DS1WM */ >> @@ -172,13 +185,12 @@ static int __init pasic3_probe(struct platform_device *pdev) >> dev_warn(dev, "failed to register DS1WM\n"); >> } >> >> - if (pdata && pdata->led_pdata) { >> - led_cell.platform_data = pdata->led_pdata; >> - led_cell.pdata_size = sizeof(struct pasic3_leds_machinfo); >> - ret = mfd_add_devices(&pdev->dev, pdev->id, &led_cell, 1, r, >> - 0, NULL); >> - if (ret < 0) >> - dev_warn(dev, "failed to register LED device\n"); >> + if (pdata && pdata->pasic3_leds) { >> + leds_pdata = dev_get_platdata(&pdata->pasic3_leds->dev); > > Whoa! You're passing a pointer to a device through pdata? > > I don't like that at all. Please explain. > >> + if (leds_pdata) { >> + leds_pdata->mfd_dev = dev; >> + platform_device_register(pdata->pasic3_leds); > > What's the idea here? Actually, I don't know how to do this in a clean way as pasic3_read_register() and pasic3_write_register() require device struct to pass address for accessing the registers. Only way would be to rewrite all functions which call pasic3_*_register() (removing struct device *dev and change it to struct pasic3_data *asic). Petr
On Tue, 18 Aug 2015, Petr Cvek wrote: > Dne 18.8.2015 v 08:52 Lee Jones napsal(a): > > On Tue, 18 Aug 2015, Petr Cvek wrote: > > > >> Fix register definitions and prepare structures for new leds-pasic3 > >> driver. > >> > >> Signed-off-by: Petr Cvek <petr.cvek@tul.cz> > >> --- > >> drivers/mfd/htc-pasic3.c | 54 ++++++++++++++++----------- > >> include/linux/mfd/htc-pasic3.h | 85 +++++++++++++++++++++++++++++++----------- > >> 2 files changed, 97 insertions(+), 42 deletions(-) > >> > >> diff --git a/drivers/mfd/htc-pasic3.c b/drivers/mfd/htc-pasic3.c > >> index e88d4f6..16e156d 100644 > >> --- a/drivers/mfd/htc-pasic3.c > >> +++ b/drivers/mfd/htc-pasic3.c > >> @@ -3,6 +3,9 @@ > >> * > >> * Copyright (C) 2006 Philipp Zabel <philipp.zabel@gmail.com> > >> * > >> + * 2015: Added registers for LED and RESET, see htc-pasic3.h > >> + * -- Petr Cvek > >> + * > > > > This is pretty unconventional. > > > > Please look to see what others have done. > > LED support: Petr Cvek <petr.cvek@tul.cz> We can see what changes/support you added in the Git log. No need to reflect that here at all. If everyone did that, the headers would be a complete mess. Just: * Copyright (C) 2015 Petr Cvek <petr.cvek@tul.cz> ... will do fine. > >> @@ -130,6 +140,7 @@ static int __init pasic3_probe(struct platform_device *pdev) > >> struct device *dev = &pdev->dev; > >> struct pasic3_data *asic; > >> struct resource *r; > >> + struct pasic3_leds_pdata *leds_pdata; > >> int ret; > >> int irq = 0; > >> > >> @@ -162,6 +173,8 @@ static int __init pasic3_probe(struct platform_device *pdev) > >> /* calculate bus shift from mem resource */ > >> asic->bus_shift = (resource_size(r) - 5) >> 3; > >> > >> + spin_lock_init(&asic->lock); > >> + > >> if (pdata && pdata->clock_rate) { > >> ds1wm_pdata.clock_rate = pdata->clock_rate; > >> /* the first 5 PASIC3 registers control the DS1WM */ > >> @@ -172,13 +185,12 @@ static int __init pasic3_probe(struct platform_device *pdev) > >> dev_warn(dev, "failed to register DS1WM\n"); > >> } > >> > >> - if (pdata && pdata->led_pdata) { > >> - led_cell.platform_data = pdata->led_pdata; > >> - led_cell.pdata_size = sizeof(struct pasic3_leds_machinfo); > >> - ret = mfd_add_devices(&pdev->dev, pdev->id, &led_cell, 1, r, > >> - 0, NULL); > >> - if (ret < 0) > >> - dev_warn(dev, "failed to register LED device\n"); > >> + if (pdata && pdata->pasic3_leds) { > >> + leds_pdata = dev_get_platdata(&pdata->pasic3_leds->dev); > > > > Whoa! You're passing a pointer to a device through pdata? > > > > I don't like that at all. Please explain. > > > > >> + if (leds_pdata) { > >> + leds_pdata->mfd_dev = dev; > >> + platform_device_register(pdata->pasic3_leds); > > > > What's the idea here? > > Actually, I don't know how to do this in a clean way as > pasic3_read_register() and pasic3_write_register() require device > struct to pass address for accessing the registers. Only way would > be to rewrite all functions which call pasic3_*_register() (removing > struct device *dev and change it to struct pasic3_data *asic). I'm still not entirely sure what the problem is. Why are you calling platform_device_register() instead of using the MFD API? Where does the 'struct device' actually get loaded into pdata?
diff --git a/drivers/mfd/htc-pasic3.c b/drivers/mfd/htc-pasic3.c index e88d4f6..16e156d 100644 --- a/drivers/mfd/htc-pasic3.c +++ b/drivers/mfd/htc-pasic3.c @@ -3,6 +3,9 @@ * * Copyright (C) 2006 Philipp Zabel <philipp.zabel@gmail.com> * + * 2015: Added registers for LED and RESET, see htc-pasic3.h + * -- Petr Cvek + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. @@ -21,15 +24,10 @@ #include <linux/mfd/htc-pasic3.h> #include <linux/slab.h> -struct pasic3_data { - void __iomem *mapping; - unsigned int bus_shift; -}; - #define REG_ADDR 5 #define REG_DATA 6 -#define READ_MODE 0x80 +#define READ_MODE BIT(7) /* * write to a secondary register on the PASIC3 @@ -76,24 +74,36 @@ static struct mfd_cell led_cell __initdata = { static int ds1wm_enable(struct platform_device *pdev) { struct device *dev = pdev->dev.parent; - int c; + struct pasic3_data *asic = platform_get_drvdata(pdev); + unsigned long flags; + u8 c; + + spin_lock_irqsave(&asic->lock, flags); + + c = pasic3_read_register(dev, PASIC3_GPIO); + pasic3_write_register(dev, PASIC3_GPIO, c & ~DS1WM_NEN); - c = pasic3_read_register(dev, 0x28); - pasic3_write_register(dev, 0x28, c & 0x7f); + spin_unlock_irqrestore(&asic->lock, flags); - dev_dbg(dev, "DS1WM OWM_EN low (active) %02x\n", c & 0x7f); + dev_dbg(dev, "DS1WM OWM_EN low (active) %02lx\n", c & ~DS1WM_NEN); return 0; } static int ds1wm_disable(struct platform_device *pdev) { struct device *dev = pdev->dev.parent; - int c; + struct pasic3_data *asic = platform_get_drvdata(pdev); + unsigned long flags; + u8 c; + + spin_lock_irqsave(&asic->lock, flags); + + c = pasic3_read_register(dev, PASIC3_GPIO); + pasic3_write_register(dev, PASIC3_GPIO, c | DS1WM_NEN); - c = pasic3_read_register(dev, 0x28); - pasic3_write_register(dev, 0x28, c | 0x80); + spin_unlock_irqrestore(&asic->lock, flags); - dev_dbg(dev, "DS1WM OWM_EN high (inactive) %02x\n", c | 0x80); + dev_dbg(dev, "DS1WM OWM_EN high (inactive) %02lx\n", c | DS1WM_NEN); return 0; } @@ -130,6 +140,7 @@ static int __init pasic3_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct pasic3_data *asic; struct resource *r; + struct pasic3_leds_pdata *leds_pdata; int ret; int irq = 0; @@ -162,6 +173,8 @@ static int __init pasic3_probe(struct platform_device *pdev) /* calculate bus shift from mem resource */ asic->bus_shift = (resource_size(r) - 5) >> 3; + spin_lock_init(&asic->lock); + if (pdata && pdata->clock_rate) { ds1wm_pdata.clock_rate = pdata->clock_rate; /* the first 5 PASIC3 registers control the DS1WM */ @@ -172,13 +185,12 @@ static int __init pasic3_probe(struct platform_device *pdev) dev_warn(dev, "failed to register DS1WM\n"); } - if (pdata && pdata->led_pdata) { - led_cell.platform_data = pdata->led_pdata; - led_cell.pdata_size = sizeof(struct pasic3_leds_machinfo); - ret = mfd_add_devices(&pdev->dev, pdev->id, &led_cell, 1, r, - 0, NULL); - if (ret < 0) - dev_warn(dev, "failed to register LED device\n"); + if (pdata && pdata->pasic3_leds) { + leds_pdata = dev_get_platdata(&pdata->pasic3_leds->dev); + if (leds_pdata) { + leds_pdata->mfd_dev = dev; + platform_device_register(pdata->pasic3_leds); + } } return 0; diff --git a/include/linux/mfd/htc-pasic3.h b/include/linux/mfd/htc-pasic3.h index 3d3ed67..91a27b6 100644 --- a/include/linux/mfd/htc-pasic3.h +++ b/include/linux/mfd/htc-pasic3.h @@ -2,6 +2,7 @@ * HTC PASIC3 driver - LEDs and DS1WM * * Copyright (c) 2007 Philipp Zabel <philipp.zabel@gmail.com> + * Copyright (c) 2015 Petr Cvek <petr.cvek@tul.cz> * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive for @@ -18,37 +19,79 @@ extern void pasic3_write_register(struct device *dev, u32 reg, u8 val); extern u8 pasic3_read_register(struct device *dev, u32 reg); -/* - * mask for registers 0x20,0x21,0x22 - */ -#define PASIC3_MASK_LED0 0x04 -#define PASIC3_MASK_LED1 0x08 -#define PASIC3_MASK_LED2 0x40 +#define PASIC3_CH0_DELAY_ON 0x00 +#define PASIC3_CH0_DELAY_OFF 0x01 +#define PASIC3_CH1_DELAY_ON 0x02 +#define PASIC3_CH1_DELAY_OFF 0x03 +#define PASIC3_CH2_DELAY_ON 0x04 +#define PASIC3_CH2_DELAY_OFF 0x05 +#define PASIC3_DELAY_MASK 0x7f + +#define PASIC3_CH_CONTROL 0x06 +#define R06_CH0_EN BIT(0) +#define R06_CH1_EN BIT(1) +#define R06_CH2_EN BIT(2) +#define R06_CH0_FORCE_ON BIT(3) +#define R06_CH1_FORCE_ON BIT(4) +#define R06_CH2_FORCE_ON BIT(5) /* - * bits in register 0x06 + * pwm_ch0_out | force_on | (bit0 & bit1 & bit2) + * pwm_ch1_out | force_on | (bit0 & bit1 & bit2) + * pwm_ch2_out | force_on | (bit2?bit0:(bit0 & ! bit1)) */ -#define PASIC3_BIT2_LED0 0x08 -#define PASIC3_BIT2_LED1 0x10 -#define PASIC3_BIT2_LED2 0x20 + +#define PASIC3_MASK_A 0x20 +#define PASIC3_MASK_B 0x21 +#define PASIC3_MASK_C 0x22 +#define MASK_CH0 BIT(2) +#define MASK_CH1 BIT(3) +#define MASK_CH2 BIT(6) +#define PASIC3_GPIO 0x28 +#define DS1WM_NEN BIT(7) +#define PASIC3_SYS 0x2a + +/* NORMAL_RST, CAM_PWR_RST and UNKNOWN will autoclear, set STATUS */ +#define NORMAL_RST BIT(0) +#define CAM_PWR_RST BIT(1) +#define UNKNOWN BIT(2) +#define STATUS_NORMAL_RST BIT(4) +#define STATUS_CAM_PWR_RST BIT(5) +#define STATUS_UNKNOWN BIT(6) + +/* FIXME/TODO reset sources */ +#define PASIC3_RST_EN 0x2c +#define EN_NORMAL_RST 0x40 +#define EN_DOOR_RST 0x42 struct pasic3_led { - struct led_classdev led; - unsigned int hw_num; - unsigned int bit2; - unsigned int mask; - struct pasic3_leds_machinfo *pdata; + char name[24]; + char default_trigger[80]; + int hw_num; + u8 bit_blink_en; + u8 bit_force_on; + u8 bit_mask; + u8 reg_delay_on; + u8 reg_delay_off; }; -struct pasic3_leds_machinfo { - unsigned int num_leds; - unsigned int power_gpio; +struct pasic3_leds_pdata { struct pasic3_led *leds; + int num_leds; + int power_gpio; + int power_gpio_users; + struct device *mfd_dev; }; -struct pasic3_platform_data { - struct pasic3_leds_machinfo *led_pdata; - unsigned int clock_rate; +struct pasic3_data { + void __iomem *mapping; + unsigned int bus_shift; + spinlock_t lock; }; +struct pasic3_platform_data { + unsigned int clock_rate; + struct pasic3_led *leds; + struct platform_device *pasic3_leds; +}; #endif
Fix register definitions and prepare structures for new leds-pasic3 driver. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> --- drivers/mfd/htc-pasic3.c | 54 ++++++++++++++++----------- include/linux/mfd/htc-pasic3.h | 85 +++++++++++++++++++++++++++++++----------- 2 files changed, 97 insertions(+), 42 deletions(-)