@@ -52,6 +52,8 @@
#include <linux/platform_data/camera-pxa.h>
#include <media/soc_camera.h>
+#include <linux/regulator/max1586.h>
+
#include "devices.h"
#include "generic.h"
@@ -787,6 +789,52 @@ static struct platform_device vads7846_device = {
};
/*
+ * Vcore regulator MAX1587A
+ */
+
+static struct regulator_consumer_supply magician_max1587a_consumers[] = {
+ REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data magician_max1587a_v3_info = {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 700000,
+ .max_uV = 1500000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .consumer_supplies = magician_max1587a_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(magician_max1587a_consumers),
+};
+
+static struct max1586_subdev_data magician_max1587a_subdevs[] = {
+ {
+ .name = "vcc_core",
+ .id = MAX1586_V3,
+ .platform_data = &magician_max1587a_v3_info,
+ }
+};
+
+static struct max1586_platform_data magician_max1587a_info = {
+ .subdevs = magician_max1587a_subdevs,
+ .num_subdevs = ARRAY_SIZE(magician_max1587a_subdevs),
+ /*
+ * NOTICE measured directly on the PCB (board_id == 0x3a), but
+ * if R24 is present, it will boost the voltage
+ * (write 1.475V, get 1.645V and smoke)
+ */
+ .v3_gain = MAX1586_GAIN_NO_R24,
+};
+
+static struct i2c_board_info magician_pwr_i2c_board_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("max1586", 0x14),
+ .platform_data = &magician_max1587a_info,
+ },
+};
+
+/*
* MMC/SD
*/
@@ -1066,6 +1114,10 @@ static void __init magician_init(void)
pxa_set_ficp_info(&magician_ficp_info);
pxa27x_set_i2c_power_info(&magician_i2c_power_info);
pxa_set_i2c_info(&i2c_info);
+
+ i2c_register_board_info(1,
+ ARRAY_AND_SIZE(magician_pwr_i2c_board_info));
+
pxa_set_mci_info(&magician_mci_info);
pxa_set_ohci_info(&magician_ohci_info);
HTC Magician contains a MAX1587A voltage regulator for a Vcore supply. The Vcore regulation is required for a CPU speed switching. This patch adds declaration for the max1586 driver. Notice: - MAX1587A version does not support the V6 (USIM) output. - A boost resistor was directly measured for a board_id 0x3a. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> --- arch/arm/mach-pxa/magician.c | 52 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+)