diff mbox series

[v2,19/33] arm64: zynqmp: Add reset-on-timeout to all boards and modify default timeout value

Message ID 5848a81447921240fddfe2f5749ae0746fcbbdbd.1623684253.git.michal.simek@xilinx.com (mailing list archive)
State New, archived
Headers show
Series arm64: zynqmp: Extend board description | expand

Commit Message

Michal Simek June 14, 2021, 3:25 p.m. UTC 
From: Mounika Grace Akula <mounika.grace.akula@xilinx.com>

This patch adds reset-on-timeout to FPD WDT which will trigger an
interrupt to PMU when watchdog expiry happens and PMU takes the
necessary action. If this property is not enabled, reason will not be
known when watchdog expiry happens.
This patch also modifies the default timeout to 60 seconds. Reason is
that if u-boot enables WDT, it will set the timeout to 10 seconds and
this is not enough to boot till Linux and start the WDT application in
Linux. 60 seconds is the maximum safest value to boot till Linux and
start the WDT application.

Users need to change this timeout value to fit their needs.

Signed-off-by: Mounika Grace Akula <mounika.grace.akula@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

Changes in v2: None

 arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index bd3f0d456ca4..80332e3b4d6a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -830,7 +830,8 @@  watchdog0: watchdog@fd4d0000 {
 			interrupt-parent = <&gic>;
 			interrupts = <0 113 1>;
 			reg = <0x0 0xfd4d0000 0x0 0x1000>;
-			timeout-sec = <10>;
+			timeout-sec = <60>;
+			reset-on-timeout;
 		};
 
 		lpd_watchdog: watchdog@ff150000 {