[19/89] clk: bcm: rpi: Split pllb clock hooks

Commit Message

Maxime Ripard Feb. 24, 2020, 9:06 a.m. UTC

The driver only supports the pllb for now and all the clock framework hooks
are a mix of the generic firmware interface and the specifics of the pllb.
Since we will support more clocks in the future let's split the generic and
specific hooks

Cc: Michael Turquette <[e-mail]>
Cc: Stephen Boyd <[e-mail]>
Cc: [e-mail]
Signed-off-by: Maxime Ripard <[e-mail]>
---
 drivers/clk/bcm/clk-raspberrypi.c | 30 ++++++++++++++++++++++--------
 1 file changed, 22 insertions(+), 8 deletions(-)

Comments

Stephen Boyd March 13, 2020, 1:08 a.m. UTC | #1

Quoting Maxime Ripard (2020-02-24 01:06:21)
> The driver only supports the pllb for now and all the clock framework hooks
> are a mix of the generic firmware interface and the specifics of the pllb.
> Since we will support more clocks in the future let's split the generic and
> specific hooks
> 
> Cc: Michael Turquette <[e-mail]>
> Cc: Stephen Boyd <[e-mail]>
> Cc: [e-mail]
> Signed-off-by: Maxime Ripard <[e-mail]>
> ---

Reviewed-by: Stephen Boyd <[e-mail]>

Patch

diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
index 13b7ee148824..6ee2c6639604 100644
--- a/drivers/clk/bcm/clk-raspberrypi.c
+++ b/drivers/clk/bcm/clk-raspberrypi.c
@@ -104,8 +104,8 @@  static int raspberrypi_fw_is_prepared(struct clk_hw *hw)
 }
 
 
-static unsigned long raspberrypi_fw_pll_get_rate(struct clk_hw *hw,
-						 unsigned long parent_rate)
+static unsigned long raspberrypi_fw_get_rate(struct clk_hw *hw,
+					     unsigned long parent_rate)
 {
 	struct raspberrypi_clk_data *data =
 		container_of(hw, struct raspberrypi_clk_data, hw);
@@ -118,21 +118,27 @@  static unsigned long raspberrypi_fw_pll_get_rate(struct clk_hw *hw,
 	if (ret)
 		return ret;
 
-	return val * RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
+	return val;
 }
 
-static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate,
-				       unsigned long parent_rate)
+static unsigned long raspberrypi_fw_pll_get_rate(struct clk_hw *hw,
+						 unsigned long parent_rate)
+{
+	return raspberrypi_fw_get_rate(hw, parent_rate) *
+		RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
+}
+
+static int raspberrypi_fw_set_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long parent_rate)
 {
 	struct raspberrypi_clk_data *data =
 		container_of(hw, struct raspberrypi_clk_data, hw);
 	struct raspberrypi_clk *rpi = data->rpi;
-	u32 new_rate = rate / RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
+	u32 _rate = rate;
 	int ret;
 
 	ret = raspberrypi_clock_property(rpi->firmware, data,
-					 RPI_FIRMWARE_SET_CLOCK_RATE,
-					 &new_rate);
+					 RPI_FIRMWARE_SET_CLOCK_RATE, &_rate);
 	if (ret)
 		dev_err_ratelimited(rpi->dev, "Failed to change %s frequency: %d",
 				    clk_hw_get_name(hw), ret);
@@ -140,6 +146,14 @@  static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 	return ret;
 }
 
+static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+				       unsigned long parent_rate)
+{
+	u32 new_rate = rate / RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
+
+	return raspberrypi_fw_set_rate(hw, new_rate, parent_rate);
+}
+
 /*
  * Sadly there is no firmware rate rounding interface. We borrowed it from
  * clk-bcm2835.