diff mbox series

[1/2] dt-bindings: sound: Convert Allwinner I2S binding to YAML

Message ID 5f8095fbd5c2c34478792b9715059675251a30e6.1558702660.git-series.maxime.ripard@bootlin.com (mailing list archive)
State New, archived
Headers show
Series [1/2] dt-bindings: sound: Convert Allwinner I2S binding to YAML | expand

Commit Message

Maxime Ripard May 24, 2019, 12:57 p.m. UTC
The Allwinner SoCs feature an I2S controller across multiple SoC
generations.

However, earlier generations were a bit simpler than the subsequent ones,
and for example would always have RX and TX capabilities, and no reset
lines.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
 Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml | 100 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 Documentation/devicetree/bindings/sound/sun4i-i2s.txt                |  45 +--------------------------------
 2 files changed, 100 insertions(+), 45 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
 delete mode 100644 Documentation/devicetree/bindings/sound/sun4i-i2s.txt


base-commit: 86c9acd4fdf5b2e1648a6cf3d6e99a7f0d35cb4f

Comments

Rob Herring May 24, 2019, 8:28 p.m. UTC | #1
On Fri, May 24, 2019 at 7:58 AM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>
> The Allwinner SoCs feature an I2S controller across multiple SoC
> generations.
>
> However, earlier generations were a bit simpler than the subsequent ones,
> and for example would always have RX and TX capabilities, and no reset
> lines.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
> ---
>  Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml | 100 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
>  Documentation/devicetree/bindings/sound/sun4i-i2s.txt                |  45 +--------------------------------
>  2 files changed, 100 insertions(+), 45 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
>  delete mode 100644 Documentation/devicetree/bindings/sound/sun4i-i2s.txt

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
new file mode 100644
index 000000000000..85b2d6d84055
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
@@ -0,0 +1,100 @@ 
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/allwinner,sun4i-a10-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 I2S Controller Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+  "#sound-dai-cells":
+    const: 0
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun4i-a10-i2s
+      - const: allwinner,sun6i-a31-i2s
+      - const: allwinner,sun8i-a83t-i2s
+      - const: allwinner,sun8i-h3-i2s
+      - const: allwinner,sun50i-a64-codec-i2s
+      - items:
+          - const: allwinner,sun50i-a64-i2s
+          - const: allwinner,sun8i-h3-i2s
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: apb
+      - const: mod
+
+  dmas:
+    items:
+      - description: RX DMA Channel
+      - description: TX DMA Channel
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  # Even though it only applies to subschemas under the conditionals,
+  # not listing them here will trigger a warning because of the
+  # additionalsProperties set to false.
+  resets:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun6i-a31-i2s
+              - allwinner,sun8i-a83t-i2s
+              - allwinner,sun8i-h3-i2s
+              - allwinner,sun50i-a64-codec-i2s
+
+    then:
+      required:
+        - resets
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    i2s0: i2s@1c22400 {
+        #sound-dai-cells = <0>;
+        compatible = "allwinner,sun4i-a10-i2s";
+        reg = <0x01c22400 0x400>;
+        interrupts = <0 16 4>;
+        clocks = <&apb0_gates 3>, <&i2s0_clk>;
+        clock-names = "apb", "mod";
+        dmas = <&dma 0 3>, <&dma 0 3>;
+        dma-names = "rx", "tx";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
deleted file mode 100644
index 61e71c1729e0..000000000000
--- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
+++ /dev/null
@@ -1,45 +0,0 @@ 
-* Allwinner A10 I2S controller
-
-The I2S bus (Inter-IC sound bus) is a serial link for digital
-audio data transfer between devices in the system.
-
-Required properties:
-
-- compatible: should be one of the following:
-   - "allwinner,sun4i-a10-i2s"
-   - "allwinner,sun6i-a31-i2s"
-   - "allwinner,sun8i-a83t-i2s"
-   - "allwinner,sun8i-h3-i2s"
-   - "allwinner,sun50i-a64-codec-i2s"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: should contain the I2S interrupt.
-- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
-	Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: should include "tx" and "rx".
-- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
-- clock-names: should contain the following:
-   - "apb" : clock for the I2S bus interface
-   - "mod" : module clock for the I2S controller
-- #sound-dai-cells : Must be equal to 0
-
-Required properties for the following compatibles:
-	- "allwinner,sun6i-a31-i2s"
-	- "allwinner,sun8i-a83t-i2s"
-	- "allwinner,sun8i-h3-i2s"
-	- "allwinner,sun50i-a64-codec-i2s"
-- resets: phandle to the reset line for this codec
-
-Example:
-
-i2s0: i2s@1c22400 {
-	#sound-dai-cells = <0>;
-	compatible = "allwinner,sun4i-a10-i2s";
-	reg = <0x01c22400 0x400>;
-	interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&apb0_gates 3>, <&i2s0_clk>;
-	clock-names = "apb", "mod";
-	dmas = <&dma SUN4I_DMA_NORMAL 3>,
-	       <&dma SUN4I_DMA_NORMAL 3>;
-	dma-names = "rx", "tx";
-};