@@ -42,6 +42,25 @@
interrupts = <6>, <7>, <8>, <9>;
};
+ spi@10600 {
+ compatible = "marvell,orion-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ reg = <0x10600 0x28>;
+ status = "disabled";
+ };
+
+ i2c@11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <5>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
serial@12000 {
compatible = "ns16550a";
reg = <0x12000 0x100>;
@@ -60,15 +79,6 @@
status = "disabled";
};
- spi@10600 {
- compatible = "marvell,orion-spi";
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- reg = <0x10600 0x28>;
- status = "disabled";
- };
-
wdt@20300 {
compatible = "marvell,orion-wdt";
reg = <0x20300 0x28>;
@@ -82,30 +92,6 @@
status = "disabled";
};
- ehci@a0000 {
- compatible = "marvell,orion-ehci";
- reg = <0xa0000 0x1000>;
- interrupts = <12>;
- status = "disabled";
- };
-
- sata@80000 {
- compatible = "marvell,orion-sata";
- reg = <0x80000 0x5000>;
- interrupts = <29>;
- status = "disabled";
- };
-
- i2c@11000 {
- compatible = "marvell,mv64xxx-i2c";
- reg = <0x11000 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <5>;
- clock-frequency = <100000>;
- status = "disabled";
- };
-
xor@60900 {
compatible = "marvell,orion-xor";
reg = <0x60900 0x100
@@ -125,26 +111,6 @@
};
};
- crypto@90000 {
- compatible = "marvell,orion-crypto";
- reg = <0x90000 0x10000>,
- <0xf2200000 0x800>;
- reg-names = "regs", "sram";
- interrupts = <28>;
- status = "okay";
- };
-
- mdio: mdio-bus@72004 {
- compatible = "marvell,orion-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x72004 0x84>;
- interrupts = <22>;
- status = "disabled";
-
- /* add phy nodes in board file */
- };
-
eth: ethernet-controller@72000 {
compatible = "marvell,orion-eth";
#address-cells = <1>;
@@ -162,5 +128,39 @@
/* set phy-handle property in board file */
};
};
+
+ mdio: mdio-bus@72004 {
+ compatible = "marvell,orion-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72004 0x84>;
+ interrupts = <22>;
+ status = "disabled";
+
+ /* add phy nodes in board file */
+ };
+
+ sata@80000 {
+ compatible = "marvell,orion-sata";
+ reg = <0x80000 0x5000>;
+ interrupts = <29>;
+ status = "disabled";
+ };
+
+ crypto@90000 {
+ compatible = "marvell,orion-crypto";
+ reg = <0x90000 0x10000>,
+ <0xf2200000 0x800>;
+ reg-names = "regs", "sram";
+ interrupts = <28>;
+ status = "okay";
+ };
+
+ ehci@a0000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0xa0000 0x1000>;
+ interrupts = <12>;
+ status = "disabled";
+ };
};
};
Prevent future unnecessary merge conflicts Signed-off-by: Jason Cooper <jason@lakedaemon.net> --- arch/arm/boot/dts/orion5x.dtsi | 106 ++++++++++++++++++++--------------------- 1 file changed, 53 insertions(+), 53 deletions(-)