| Message ID | 66f17842775bf03defd1f5cad41fada0f2b97bdc.1730123575.git.andrea.porta@suse.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Add support for RaspberryPi RP1 PCI device using a DT overlay | expand |
On 10/28/24 16:07, Andrea della Porta wrote: > The RaspberryPi RP1 is a PCI multi function device containing > peripherals ranging from Ethernet to USB controller, I2C, SPI > and others. > > Implement a bare minimum driver to operate the RP1, leveraging > actual OF based driver implementations for the on-board peripherals > by loading a devicetree overlay during driver probe. > > The peripherals are accessed by mapping MMIO registers starting > from PCI BAR1 region. > > With the overlay approach we can achieve more generic and agnostic > approach to managing this chipset, being that it is a PCI endpoint > and could possibly be reused in other hw implementations. The > presented approach is also used by Bootlin's Microchip LAN966x > patchset (see link) as well, for a similar chipset. > > Since the gpio line names should be provided by the user, there > is an interface through configfs that allows the userspace to > load a DT overlay that will provide gpio-line-names property. > The interface can be invoked like this: > > cat rpi-rp1-gpios-5-b.dtbo > /sys/kernel/config/rp1-cfg/gpio_set_names > > and is designed to be similar to what users are already used to > from distro with downstream kernel. > > For reasons why this driver is contained in drivers/misc, please > check the links. > > This driver is heavily based on downstream code from RaspberryPi > Foundation, and the original author is Phil Elwell. > > Link: https://datasheets.raspberrypi.com/rp1/rp1-peripherals.pdf > Link: https://lore.kernel.org/all/20240612140208.GC1504919@google.com/ > Link: https://lore.kernel.org/all/83f7fa09-d0e6-4f36-a27d-cee08979be2a@app.fastmail.com/ > Link: https://lore.kernel.org/all/2024081356-mutable-everyday-6f9d@gregkh/ > Link: https://lore.kernel.org/all/20240808154658.247873-1-herve.codina@bootlin.com/ > > Signed-off-by: Andrea della Porta <andrea.porta@suse.com> > --- > MAINTAINERS | 1 + > drivers/misc/Kconfig | 1 + > drivers/misc/Makefile | 1 + > drivers/misc/rp1/Kconfig | 21 ++ > drivers/misc/rp1/Makefile | 3 + > drivers/misc/rp1/rp1-pci.dtso | 8 + > drivers/misc/rp1/rp1_pci.c | 357 ++++++++++++++++++++++++++++++++++ > drivers/misc/rp1/rp1_pci.h | 14 ++ > drivers/pci/quirks.c | 1 + > include/linux/pci_ids.h | 3 + > 10 files changed, 410 insertions(+) > create mode 100644 drivers/misc/rp1/Kconfig > create mode 100644 drivers/misc/rp1/Makefile > create mode 100644 drivers/misc/rp1/rp1-pci.dtso > create mode 100644 drivers/misc/rp1/rp1_pci.c > create mode 100644 drivers/misc/rp1/rp1_pci.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index 510a071ede78..032678fb2470 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -19389,6 +19389,7 @@ F: Documentation/devicetree/bindings/misc/pci1de4,1.yaml > F: Documentation/devicetree/bindings/pci/pci-ep-bus.yaml > F: Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml > F: drivers/clk/clk-rp1.c > +F: drivers/misc/rp1/ > F: drivers/pinctrl/pinctrl-rp1.c > F: include/dt-bindings/clock/rp1.h > F: include/dt-bindings/misc/rp1.h > diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig > index 3fe7e2a9bd29..ac85cb154100 100644 > --- a/drivers/misc/Kconfig > +++ b/drivers/misc/Kconfig > @@ -628,4 +628,5 @@ source "drivers/misc/uacce/Kconfig" > source "drivers/misc/pvpanic/Kconfig" > source "drivers/misc/mchp_pci1xxxx/Kconfig" > source "drivers/misc/keba/Kconfig" > +source "drivers/misc/rp1/Kconfig" > endmenu > diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile > index a9f94525e181..ae86d69997b4 100644 > --- a/drivers/misc/Makefile > +++ b/drivers/misc/Makefile > @@ -72,3 +72,4 @@ obj-$(CONFIG_TPS6594_PFSM) += tps6594-pfsm.o > obj-$(CONFIG_NSM) += nsm.o > obj-$(CONFIG_MARVELL_CN10K_DPI) += mrvl_cn10k_dpi.o > obj-y += keba/ > +obj-$(CONFIG_MISC_RP1) += rp1/ > diff --git a/drivers/misc/rp1/Kconfig b/drivers/misc/rp1/Kconfig > new file mode 100644 > index 000000000000..39c4aa4bf634 > --- /dev/null > +++ b/drivers/misc/rp1/Kconfig > @@ -0,0 +1,21 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +# > +# RaspberryPi RP1 misc device > +# > + > +config MISC_RP1 > + tristate "RaspberryPi RP1 PCIe support" > + depends on OF_IRQ && PCI_MSI && PCI_QUIRKS > + select OF_OVERLAY > + select PCI_DYNAMIC_OF_NODES > + help > + Support the RP1 peripheral chip found on Raspberry Pi 5 board. > + > + This device supports several sub-devices including e.g. Ethernet > + controller, USB controller, I2C, SPI and UART. > + > + The driver is responsible for enabling the DT node once the PCIe > + endpoint has been configured, and handling interrupts. > + > + This driver uses an overlay to load other drivers to support for > + RP1 internal sub-devices. > diff --git a/drivers/misc/rp1/Makefile b/drivers/misc/rp1/Makefile > new file mode 100644 > index 000000000000..508b4cb05627 > --- /dev/null > +++ b/drivers/misc/rp1/Makefile > @@ -0,0 +1,3 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +obj-$(CONFIG_MISC_RP1) += rp1-pci.o > +rp1-pci-objs := rp1_pci.o rp1-pci.dtbo.o > diff --git a/drivers/misc/rp1/rp1-pci.dtso b/drivers/misc/rp1/rp1-pci.dtso > new file mode 100644 > index 000000000000..0bf2f4bb18e6 > --- /dev/null > +++ b/drivers/misc/rp1/rp1-pci.dtso > @@ -0,0 +1,8 @@ > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > + > +/* the dts overlay is included from the dts directory so > + * it can be possible to check it with CHECK_DTBS while > + * also compile it from the driver source directory. > + */ > + > +#include "arm64/broadcom/rp1.dtso" > diff --git a/drivers/misc/rp1/rp1_pci.c b/drivers/misc/rp1/rp1_pci.c > new file mode 100644 > index 000000000000..30d7a15dc7f1 > --- /dev/null > +++ b/drivers/misc/rp1/rp1_pci.c > @@ -0,0 +1,357 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2018-24 Raspberry Pi Ltd. > + * All rights reserved. > + */ > + > +#include <linux/err.h> > +#include <linux/interrupt.h> > +#include <linux/irq.h> > +#include <linux/irqchip/chained_irq.h> > +#include <linux/irqdomain.h> > +#include <linux/module.h> > +#include <linux/msi.h> > +#include <linux/of_platform.h> > +#include <linux/pci.h> > +#include <linux/platform_device.h> > + > +#include "rp1_pci.h" > + > +#define RP1_DRIVER_NAME "rp1" > + > +#define RP1_HW_IRQ_MASK GENMASK(5, 0) > + > +#define REG_SET 0x800 > +#define REG_CLR 0xc00 > + > +/* MSI-X CFG registers start at 0x8 */ > +#define MSIX_CFG(x) (0x8 + (4 * (x))) > + > +#define MSIX_CFG_IACK_EN BIT(3) > +#define MSIX_CFG_IACK BIT(2) > +#define MSIX_CFG_ENABLE BIT(0) > + > +/* Address map */ > +#define RP1_PCIE_APBS_BASE 0x108000 > + > +/* Interrupts */ > +#define RP1_INT_IO_BANK0 0 > +#define RP1_INT_IO_BANK1 1 > +#define RP1_INT_IO_BANK2 2 > +#define RP1_INT_AUDIO_IN 3 > +#define RP1_INT_AUDIO_OUT 4 > +#define RP1_INT_PWM0 5 > +#define RP1_INT_ETH 6 > +#define RP1_INT_I2C0 7 > +#define RP1_INT_I2C1 8 > +#define RP1_INT_I2C2 9 > +#define RP1_INT_I2C3 10 > +#define RP1_INT_I2C4 11 > +#define RP1_INT_I2C5 12 > +#define RP1_INT_I2C6 13 > +#define RP1_INT_I2S0 14 > +#define RP1_INT_I2S1 15 > +#define RP1_INT_I2S2 16 > +#define RP1_INT_SDIO0 17 > +#define RP1_INT_SDIO1 18 > +#define RP1_INT_SPI0 19 > +#define RP1_INT_SPI1 20 > +#define RP1_INT_SPI2 21 > +#define RP1_INT_SPI3 22 > +#define RP1_INT_SPI4 23 > +#define RP1_INT_SPI5 24 > +#define RP1_INT_UART0 25 > +#define RP1_INT_TIMER_0 26 > +#define RP1_INT_TIMER_1 27 > +#define RP1_INT_TIMER_2 28 > +#define RP1_INT_TIMER_3 29 > +#define RP1_INT_USBHOST0 30 > +#define RP1_INT_USBHOST0_0 31 > +#define RP1_INT_USBHOST0_1 32 > +#define RP1_INT_USBHOST0_2 33 > +#define RP1_INT_USBHOST0_3 34 > +#define RP1_INT_USBHOST1 35 > +#define RP1_INT_USBHOST1_0 36 > +#define RP1_INT_USBHOST1_1 37 > +#define RP1_INT_USBHOST1_2 38 > +#define RP1_INT_USBHOST1_3 39 > +#define RP1_INT_DMA 40 > +#define RP1_INT_PWM1 41 > +#define RP1_INT_UART1 42 > +#define RP1_INT_UART2 43 > +#define RP1_INT_UART3 44 > +#define RP1_INT_UART4 45 > +#define RP1_INT_UART5 46 > +#define RP1_INT_MIPI0 47 > +#define RP1_INT_MIPI1 48 > +#define RP1_INT_VIDEO_OUT 49 > +#define RP1_INT_PIO_0 50 > +#define RP1_INT_PIO_1 51 > +#define RP1_INT_ADC_FIFO 52 > +#define RP1_INT_PCIE_OUT 53 > +#define RP1_INT_SPI6 54 > +#define RP1_INT_SPI7 55 > +#define RP1_INT_SPI8 56 > +#define RP1_INT_SYSCFG 58 > +#define RP1_INT_CLOCKS_DEFAULT 59 > +#define RP1_INT_VBUSCTRL 60 > +#define RP1_INT_PROC_MISC 57 > +#define RP1_INT_END 61 > + How those interrupts are supposed to be used by rp1-pci.dtso (or from rp1.dtso)? include/dt-bindings/interrupt-controller/raspberrypi,rp1-interrupts.h ? > +struct rp1_dev { > + struct pci_dev *pdev; > + struct device *dev; > + struct irq_domain *domain; > + struct irq_data *pcie_irqds[64]; > + void __iomem *bar1; > + int ovcs_id; > + bool level_triggered_irq[RP1_INT_END]; > +}; > + > +static void msix_cfg_set(struct rp1_dev *rp1, unsigned int hwirq, u32 value) > +{ > + iowrite32(value, rp1->bar1 + RP1_PCIE_APBS_BASE + REG_SET + MSIX_CFG(hwirq)); > +} > + > +static void msix_cfg_clr(struct rp1_dev *rp1, unsigned int hwirq, u32 value) > +{ > + iowrite32(value, rp1->bar1 + RP1_PCIE_APBS_BASE + REG_CLR + MSIX_CFG(hwirq)); > +} > + > +static void rp1_mask_irq(struct irq_data *irqd) > +{ > + struct rp1_dev *rp1 = irqd->domain->host_data; > + struct irq_data *pcie_irqd = rp1->pcie_irqds[irqd->hwirq]; > + > + pci_msi_mask_irq(pcie_irqd); > +} > + > +static void rp1_unmask_irq(struct irq_data *irqd) > +{ > + struct rp1_dev *rp1 = irqd->domain->host_data; > + struct irq_data *pcie_irqd = rp1->pcie_irqds[irqd->hwirq]; > + > + pci_msi_unmask_irq(pcie_irqd); > +} > + > +static int rp1_irq_set_type(struct irq_data *irqd, unsigned int type) > +{ > + struct rp1_dev *rp1 = irqd->domain->host_data; > + unsigned int hwirq = (unsigned int)irqd->hwirq; > + > + switch (type) { > + case IRQ_TYPE_LEVEL_HIGH: > + dev_dbg(rp1->dev, "MSIX IACK EN for irq %d\n", hwirq); > + msix_cfg_set(rp1, hwirq, MSIX_CFG_IACK_EN); > + rp1->level_triggered_irq[hwirq] = true; > + break; > + case IRQ_TYPE_EDGE_RISING: > + msix_cfg_clr(rp1, hwirq, MSIX_CFG_IACK_EN); > + rp1->level_triggered_irq[hwirq] = false; > + break; > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > +static struct irq_chip rp1_irq_chip = { > + .name = "rp1_irq_chip", tabs instead of spaces here and below. > + .irq_mask = rp1_mask_irq, > + .irq_unmask = rp1_unmask_irq, > + .irq_set_type = rp1_irq_set_type, > +}; > + > +static void rp1_chained_handle_irq(struct irq_desc *desc) > +{ > + unsigned int hwirq = desc->irq_data.hwirq & RP1_HW_IRQ_MASK; > + struct rp1_dev *rp1 = irq_desc_get_handler_data(desc); > + struct irq_chip *chip = irq_desc_get_chip(desc); > + int virq; unsigned int > + > + chained_irq_enter(chip, desc); > + > + virq = irq_find_mapping(rp1->domain, hwirq); > + generic_handle_irq(virq); > + if (rp1->level_triggered_irq[hwirq]) > + msix_cfg_set(rp1, hwirq, MSIX_CFG_IACK); > + > + chained_irq_exit(chip, desc); > +} > + > +static int rp1_irq_xlate(struct irq_domain *d, struct device_node *node, > + const u32 *intspec, unsigned int intsize, > + unsigned long *out_hwirq, unsigned int *out_type) > +{ > + struct rp1_dev *rp1 = d->host_data; > + struct irq_data *pcie_irqd; > + unsigned long hwirq; > + int pcie_irq; > + int ret; > + > + ret = irq_domain_xlate_twocell(d, node, intspec, intsize, > + &hwirq, out_type); > + if (ret) > + return ret; > + > + pcie_irq = pci_irq_vector(rp1->pdev, hwirq); > + pcie_irqd = irq_get_irq_data(pcie_irq); > + rp1->pcie_irqds[hwirq] = pcie_irqd; > + *out_hwirq = hwirq; > + > + return 0; > +} > + > +static int rp1_irq_activate(struct irq_domain *d, struct irq_data *irqd, > + bool reserve) > +{ > + struct rp1_dev *rp1 = d->host_data; > + > + msix_cfg_set(rp1, (unsigned int)irqd->hwirq, MSIX_CFG_ENABLE); > + > + return 0; > +} > + > +static void rp1_irq_deactivate(struct irq_domain *d, struct irq_data *irqd) > +{ > + struct rp1_dev *rp1 = d->host_data; > + > + msix_cfg_clr(rp1, (unsigned int)irqd->hwirq, MSIX_CFG_ENABLE); > +} > + > +static const struct irq_domain_ops rp1_domain_ops = { > + .xlate = rp1_irq_xlate, > + .activate = rp1_irq_activate, > + .deactivate = rp1_irq_deactivate, > +}; > + > +static void rp1_unregister_interrupts(struct pci_dev *pdev) > +{ > + struct rp1_dev *rp1 = pci_get_drvdata(pdev); > + int irq, i; > + > + for (i = 0; i < RP1_INT_END; i++) { > + irq = irq_find_mapping(rp1->domain, i); > + irq_dispose_mapping(irq); > + } new line > + irq_domain_remove(rp1->domain); > + pci_free_irq_vectors(pdev); > +} > + > +static int rp1_probe(struct pci_dev *pdev, const struct pci_device_id *id) > +{ > + u32 dtbo_size = __dtbo_rp1_pci_end - __dtbo_rp1_pci_begin; > + void *dtbo_start = __dtbo_rp1_pci_begin; > + struct device *dev = &pdev->dev; > + struct device_node *rp1_node; > + struct rp1_dev *rp1; > + int err = 0; > + int i; > + > + rp1_node = dev_of_node(dev); > + if (!rp1_node) { > + dev_err(dev, "Missing of_node for device\n"); > + return -EINVAL; > + } > + > + rp1 = devm_kzalloc(&pdev->dev, sizeof(*rp1), GFP_KERNEL); > + if (!rp1) > + return -ENOMEM; > + > + rp1->pdev = pdev; > + rp1->dev = &pdev->dev; rp1->dev is used only once in dev_dbg macro. You could drop it and extract struct device from rp1->pdev. > + > + if (pci_resource_len(pdev, 1) <= 0x10000) { > + dev_err(&pdev->dev, > + "Not initialised - is the firmware running?\n"); no need of a new line > + return -EINVAL; > + } > + > + err = pcim_enable_device(pdev); > + if (err < 0) { > + dev_err(&pdev->dev, "Enabling PCI device has failed: %d", > + err); ditto > + return err; > + } > + > + rp1->bar1 = pcim_iomap(pdev, 1, 0); > + if (!rp1->bar1) { > + dev_err(&pdev->dev, "Cannot map PCI BAR\n"); > + return -EIO; > + } > + > + pci_set_master(pdev); > + > + err = pci_alloc_irq_vectors(pdev, RP1_INT_END, RP1_INT_END, > + PCI_IRQ_MSIX); ditto > + if (err != RP1_INT_END) { an 'err' could be smaller then RP1_INT_END but still positive, thus .probe will return positive error code. > + dev_err(&pdev->dev, "pci_alloc_irq_vectors failed - %d\n", err); > + return err; > + } > + > + pci_set_drvdata(pdev, rp1); > + rp1->domain = irq_domain_add_linear(rp1_node, RP1_INT_END, > + &rp1_domain_ops, rp1); irq_domain_add_linear() could fail, check for error ... > + > + for (i = 0; i < RP1_INT_END; i++) { > + int irq = irq_create_mapping(rp1->domain, i); irq_create_mapping() returns 'unsigned int', maybe something like this: unsigned int irq = irq_create_mapping(rp1->domain, i); if (!irq) { err = -EINVAL; (or -ENOMEM) ... } > + > + if (irq < 0) { > + dev_err(&pdev->dev, "failed to create irq mapping\n"); > + err = irq; > + goto err_unload_overlay; goto err_unregister_interrupts; ? > + } new line, please > + irq_set_chip_and_handler(irq, &rp1_irq_chip, handle_level_irq); > + irq_set_probe(irq); > + irq_set_chained_handler_and_data(pci_irq_vector(pdev, i), > + rp1_chained_handle_irq, rp1); > + } > + > + err = of_overlay_fdt_apply(dtbo_start, dtbo_size, &rp1->ovcs_id, rp1_node); > + if (err) > + goto err_unregister_interrupts; > + > + err = of_platform_default_populate(rp1_node, NULL, dev); > + if (err) > + goto err_unload_overlay; > + > + return 0; > + > +err_unload_overlay: > + of_overlay_remove(&rp1->ovcs_id); > +err_unregister_interrupts: > + rp1_unregister_interrupts(pdev); > + > + return err; > +} > + > +static void rp1_remove(struct pci_dev *pdev) > +{ > + struct rp1_dev *rp1 = pci_get_drvdata(pdev); > + struct device *dev = &pdev->dev; > + > + of_platform_depopulate(dev); > + of_overlay_remove(&rp1->ovcs_id); > + rp1_unregister_interrupts(pdev); > +} > + > +static const struct pci_device_id dev_id_table[] = { > + { PCI_DEVICE(PCI_VENDOR_ID_RPI, PCI_DEVICE_ID_RPI_RP1_C0), }, > + { 0, } > +}; > +MODULE_DEVICE_TABLE(pci, dev_id_table); > + > +static struct pci_driver rp1_driver = { > + .name = RP1_DRIVER_NAME, > + .id_table = dev_id_table, > + .probe = rp1_probe, > + .remove = rp1_remove, > +}; > + > +module_pci_driver(rp1_driver); > + > +MODULE_AUTHOR("Phil Elwell <phil@raspberrypi.com>"); > +MODULE_AUTHOR("Andrea della Porta <andrea.porta@suse.com>"); > +MODULE_DESCRIPTION("RP1 wrapper"); > +MODULE_LICENSE("GPL"); > diff --git a/drivers/misc/rp1/rp1_pci.h b/drivers/misc/rp1/rp1_pci.h > new file mode 100644 > index 000000000000..7982f13bad9b > --- /dev/null > +++ b/drivers/misc/rp1/rp1_pci.h > @@ -0,0 +1,14 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > + > +/* > + * Copyright (c) 2018-24 Raspberry Pi Ltd. > + * All rights reserved. > + */ > + > +#ifndef _RP1_EXTERN_H_ > +#define _RP1_EXTERN_H_ > + > +extern char __dtbo_rp1_pci_begin[]; > +extern char __dtbo_rp1_pci_end[]; Could you point me where those two variables are used outside of rp1_pci.c? ~Stan
Hi Stan, On 15:43 Mon 04 Nov , Stanimir Varbanov wrote: > On 10/28/24 16:07, Andrea della Porta wrote: > > The RaspberryPi RP1 is a PCI multi function device containing > > peripherals ranging from Ethernet to USB controller, I2C, SPI > > and others. > > > > Implement a bare minimum driver to operate the RP1, leveraging > > actual OF based driver implementations for the on-board peripherals > > by loading a devicetree overlay during driver probe. > > > > The peripherals are accessed by mapping MMIO registers starting > > from PCI BAR1 region. > > > > With the overlay approach we can achieve more generic and agnostic > > approach to managing this chipset, being that it is a PCI endpoint > > and could possibly be reused in other hw implementations. The > > presented approach is also used by Bootlin's Microchip LAN966x > > patchset (see link) as well, for a similar chipset. > > > > Since the gpio line names should be provided by the user, there > > is an interface through configfs that allows the userspace to > > load a DT overlay that will provide gpio-line-names property. > > The interface can be invoked like this: > > > > cat rpi-rp1-gpios-5-b.dtbo > /sys/kernel/config/rp1-cfg/gpio_set_names > > > > and is designed to be similar to what users are already used to > > from distro with downstream kernel. > > > > For reasons why this driver is contained in drivers/misc, please > > check the links. > > > > This driver is heavily based on downstream code from RaspberryPi > > Foundation, and the original author is Phil Elwell. > > > > Link: https://datasheets.raspberrypi.com/rp1/rp1-peripherals.pdf > > Link: https://lore.kernel.org/all/20240612140208.GC1504919@google.com/ > > Link: https://lore.kernel.org/all/83f7fa09-d0e6-4f36-a27d-cee08979be2a@app.fastmail.com/ > > Link: https://lore.kernel.org/all/2024081356-mutable-everyday-6f9d@gregkh/ > > Link: https://lore.kernel.org/all/20240808154658.247873-1-herve.codina@bootlin.com/ > > > > Signed-off-by: Andrea della Porta <andrea.porta@suse.com> > > --- > > MAINTAINERS | 1 + > > drivers/misc/Kconfig | 1 + > > drivers/misc/Makefile | 1 + > > drivers/misc/rp1/Kconfig | 21 ++ > > drivers/misc/rp1/Makefile | 3 + > > drivers/misc/rp1/rp1-pci.dtso | 8 + > > drivers/misc/rp1/rp1_pci.c | 357 ++++++++++++++++++++++++++++++++++ > > drivers/misc/rp1/rp1_pci.h | 14 ++ > > drivers/pci/quirks.c | 1 + > > include/linux/pci_ids.h | 3 + > > 10 files changed, 410 insertions(+) > > create mode 100644 drivers/misc/rp1/Kconfig > > create mode 100644 drivers/misc/rp1/Makefile > > create mode 100644 drivers/misc/rp1/rp1-pci.dtso > > create mode 100644 drivers/misc/rp1/rp1_pci.c > > create mode 100644 drivers/misc/rp1/rp1_pci.h > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 510a071ede78..032678fb2470 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -19389,6 +19389,7 @@ F: Documentation/devicetree/bindings/misc/pci1de4,1.yaml > > F: Documentation/devicetree/bindings/pci/pci-ep-bus.yaml > > F: Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml > > F: drivers/clk/clk-rp1.c > > +F: drivers/misc/rp1/ > > F: drivers/pinctrl/pinctrl-rp1.c > > F: include/dt-bindings/clock/rp1.h > > F: include/dt-bindings/misc/rp1.h > > diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig > > index 3fe7e2a9bd29..ac85cb154100 100644 > > --- a/drivers/misc/Kconfig > > +++ b/drivers/misc/Kconfig > > @@ -628,4 +628,5 @@ source "drivers/misc/uacce/Kconfig" > > source "drivers/misc/pvpanic/Kconfig" > > source "drivers/misc/mchp_pci1xxxx/Kconfig" > > source "drivers/misc/keba/Kconfig" > > +source "drivers/misc/rp1/Kconfig" > > endmenu > > diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile > > index a9f94525e181..ae86d69997b4 100644 > > --- a/drivers/misc/Makefile > > +++ b/drivers/misc/Makefile > > @@ -72,3 +72,4 @@ obj-$(CONFIG_TPS6594_PFSM) += tps6594-pfsm.o > > obj-$(CONFIG_NSM) += nsm.o > > obj-$(CONFIG_MARVELL_CN10K_DPI) += mrvl_cn10k_dpi.o > > obj-y += keba/ > > +obj-$(CONFIG_MISC_RP1) += rp1/ > > diff --git a/drivers/misc/rp1/Kconfig b/drivers/misc/rp1/Kconfig > > new file mode 100644 > > index 000000000000..39c4aa4bf634 > > --- /dev/null > > +++ b/drivers/misc/rp1/Kconfig > > @@ -0,0 +1,21 @@ > > +# SPDX-License-Identifier: GPL-2.0-only > > +# > > +# RaspberryPi RP1 misc device > > +# > > + > > +config MISC_RP1 > > + tristate "RaspberryPi RP1 PCIe support" > > + depends on OF_IRQ && PCI_MSI && PCI_QUIRKS > > + select OF_OVERLAY > > + select PCI_DYNAMIC_OF_NODES > > + help > > + Support the RP1 peripheral chip found on Raspberry Pi 5 board. > > + > > + This device supports several sub-devices including e.g. Ethernet > > + controller, USB controller, I2C, SPI and UART. > > + > > + The driver is responsible for enabling the DT node once the PCIe > > + endpoint has been configured, and handling interrupts. > > + > > + This driver uses an overlay to load other drivers to support for > > + RP1 internal sub-devices. > > diff --git a/drivers/misc/rp1/Makefile b/drivers/misc/rp1/Makefile > > new file mode 100644 > > index 000000000000..508b4cb05627 > > --- /dev/null > > +++ b/drivers/misc/rp1/Makefile > > @@ -0,0 +1,3 @@ > > +# SPDX-License-Identifier: GPL-2.0-only > > +obj-$(CONFIG_MISC_RP1) += rp1-pci.o > > +rp1-pci-objs := rp1_pci.o rp1-pci.dtbo.o > > diff --git a/drivers/misc/rp1/rp1-pci.dtso b/drivers/misc/rp1/rp1-pci.dtso > > new file mode 100644 > > index 000000000000..0bf2f4bb18e6 > > --- /dev/null > > +++ b/drivers/misc/rp1/rp1-pci.dtso > > @@ -0,0 +1,8 @@ > > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > > + > > +/* the dts overlay is included from the dts directory so > > + * it can be possible to check it with CHECK_DTBS while > > + * also compile it from the driver source directory. > > + */ > > + > > +#include "arm64/broadcom/rp1.dtso" > > diff --git a/drivers/misc/rp1/rp1_pci.c b/drivers/misc/rp1/rp1_pci.c > > new file mode 100644 > > index 000000000000..30d7a15dc7f1 > > --- /dev/null > > +++ b/drivers/misc/rp1/rp1_pci.c > > @@ -0,0 +1,357 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Copyright (c) 2018-24 Raspberry Pi Ltd. > > + * All rights reserved. > > + */ > > + > > +#include <linux/err.h> > > +#include <linux/interrupt.h> > > +#include <linux/irq.h> > > +#include <linux/irqchip/chained_irq.h> > > +#include <linux/irqdomain.h> > > +#include <linux/module.h> > > +#include <linux/msi.h> > > +#include <linux/of_platform.h> > > +#include <linux/pci.h> > > +#include <linux/platform_device.h> > > + > > +#include "rp1_pci.h" > > + > > +#define RP1_DRIVER_NAME "rp1" > > + > > +#define RP1_HW_IRQ_MASK GENMASK(5, 0) > > + > > +#define REG_SET 0x800 > > +#define REG_CLR 0xc00 > > + > > +/* MSI-X CFG registers start at 0x8 */ > > +#define MSIX_CFG(x) (0x8 + (4 * (x))) > > + > > +#define MSIX_CFG_IACK_EN BIT(3) > > +#define MSIX_CFG_IACK BIT(2) > > +#define MSIX_CFG_ENABLE BIT(0) > > + > > +/* Address map */ > > +#define RP1_PCIE_APBS_BASE 0x108000 > > + > > +/* Interrupts */ > > +#define RP1_INT_IO_BANK0 0 > > +#define RP1_INT_IO_BANK1 1 > > +#define RP1_INT_IO_BANK2 2 > > +#define RP1_INT_AUDIO_IN 3 > > +#define RP1_INT_AUDIO_OUT 4 > > +#define RP1_INT_PWM0 5 > > +#define RP1_INT_ETH 6 > > +#define RP1_INT_I2C0 7 > > +#define RP1_INT_I2C1 8 > > +#define RP1_INT_I2C2 9 > > +#define RP1_INT_I2C3 10 > > +#define RP1_INT_I2C4 11 > > +#define RP1_INT_I2C5 12 > > +#define RP1_INT_I2C6 13 > > +#define RP1_INT_I2S0 14 > > +#define RP1_INT_I2S1 15 > > +#define RP1_INT_I2S2 16 > > +#define RP1_INT_SDIO0 17 > > +#define RP1_INT_SDIO1 18 > > +#define RP1_INT_SPI0 19 > > +#define RP1_INT_SPI1 20 > > +#define RP1_INT_SPI2 21 > > +#define RP1_INT_SPI3 22 > > +#define RP1_INT_SPI4 23 > > +#define RP1_INT_SPI5 24 > > +#define RP1_INT_UART0 25 > > +#define RP1_INT_TIMER_0 26 > > +#define RP1_INT_TIMER_1 27 > > +#define RP1_INT_TIMER_2 28 > > +#define RP1_INT_TIMER_3 29 > > +#define RP1_INT_USBHOST0 30 > > +#define RP1_INT_USBHOST0_0 31 > > +#define RP1_INT_USBHOST0_1 32 > > +#define RP1_INT_USBHOST0_2 33 > > +#define RP1_INT_USBHOST0_3 34 > > +#define RP1_INT_USBHOST1 35 > > +#define RP1_INT_USBHOST1_0 36 > > +#define RP1_INT_USBHOST1_1 37 > > +#define RP1_INT_USBHOST1_2 38 > > +#define RP1_INT_USBHOST1_3 39 > > +#define RP1_INT_DMA 40 > > +#define RP1_INT_PWM1 41 > > +#define RP1_INT_UART1 42 > > +#define RP1_INT_UART2 43 > > +#define RP1_INT_UART3 44 > > +#define RP1_INT_UART4 45 > > +#define RP1_INT_UART5 46 > > +#define RP1_INT_MIPI0 47 > > +#define RP1_INT_MIPI1 48 > > +#define RP1_INT_VIDEO_OUT 49 > > +#define RP1_INT_PIO_0 50 > > +#define RP1_INT_PIO_1 51 > > +#define RP1_INT_ADC_FIFO 52 > > +#define RP1_INT_PCIE_OUT 53 > > +#define RP1_INT_SPI6 54 > > +#define RP1_INT_SPI7 55 > > +#define RP1_INT_SPI8 56 > > +#define RP1_INT_SYSCFG 58 > > +#define RP1_INT_CLOCKS_DEFAULT 59 > > +#define RP1_INT_VBUSCTRL 60 > > +#define RP1_INT_PROC_MISC 57 > > +#define RP1_INT_END 61 > > + > > How those interrupts are supposed to be used by rp1-pci.dtso (or from > rp1.dtso)? Unfortunately they will not. See below. > > include/dt-bindings/interrupt-controller/raspberrypi,rp1-interrupts.h ? Please see: https://lore.kernel.org/all/e05705c1-95dc-4d77-8a0d-8c2a785b0b05@kernel.org/ > > > +struct rp1_dev { > > + struct pci_dev *pdev; > > + struct device *dev; > > + struct irq_domain *domain; > > + struct irq_data *pcie_irqds[64]; > > + void __iomem *bar1; > > + int ovcs_id; > > + bool level_triggered_irq[RP1_INT_END]; > > +}; > > + > > +static void msix_cfg_set(struct rp1_dev *rp1, unsigned int hwirq, u32 value) > > +{ > > + iowrite32(value, rp1->bar1 + RP1_PCIE_APBS_BASE + REG_SET + MSIX_CFG(hwirq)); > > +} > > + > > +static void msix_cfg_clr(struct rp1_dev *rp1, unsigned int hwirq, u32 value) > > +{ > > + iowrite32(value, rp1->bar1 + RP1_PCIE_APBS_BASE + REG_CLR + MSIX_CFG(hwirq)); > > +} > > + > > +static void rp1_mask_irq(struct irq_data *irqd) > > +{ > > + struct rp1_dev *rp1 = irqd->domain->host_data; > > + struct irq_data *pcie_irqd = rp1->pcie_irqds[irqd->hwirq]; > > + > > + pci_msi_mask_irq(pcie_irqd); > > +} > > + > > +static void rp1_unmask_irq(struct irq_data *irqd) > > +{ > > + struct rp1_dev *rp1 = irqd->domain->host_data; > > + struct irq_data *pcie_irqd = rp1->pcie_irqds[irqd->hwirq]; > > + > > + pci_msi_unmask_irq(pcie_irqd); > > +} > > + > > +static int rp1_irq_set_type(struct irq_data *irqd, unsigned int type) > > +{ > > + struct rp1_dev *rp1 = irqd->domain->host_data; > > + unsigned int hwirq = (unsigned int)irqd->hwirq; > > + > > + switch (type) { > > + case IRQ_TYPE_LEVEL_HIGH: > > + dev_dbg(rp1->dev, "MSIX IACK EN for irq %d\n", hwirq); > > + msix_cfg_set(rp1, hwirq, MSIX_CFG_IACK_EN); > > + rp1->level_triggered_irq[hwirq] = true; > > + break; > > + case IRQ_TYPE_EDGE_RISING: > > + msix_cfg_clr(rp1, hwirq, MSIX_CFG_IACK_EN); > > + rp1->level_triggered_irq[hwirq] = false; > > + break; > > + default: > > + return -EINVAL; > > + } > > + > > + return 0; > > +} > > + > > +static struct irq_chip rp1_irq_chip = { > > + .name = "rp1_irq_chip", > > tabs instead of spaces here and below. Ack. > > > + .irq_mask = rp1_mask_irq, > > + .irq_unmask = rp1_unmask_irq, > > + .irq_set_type = rp1_irq_set_type, > > +}; > > + > > +static void rp1_chained_handle_irq(struct irq_desc *desc) > > +{ > > + unsigned int hwirq = desc->irq_data.hwirq & RP1_HW_IRQ_MASK; > > + struct rp1_dev *rp1 = irq_desc_get_handler_data(desc); > > + struct irq_chip *chip = irq_desc_get_chip(desc); > > + int virq; > > unsigned int Ack. > > > + > > + chained_irq_enter(chip, desc); > > + > > + virq = irq_find_mapping(rp1->domain, hwirq); > > + generic_handle_irq(virq); > > + if (rp1->level_triggered_irq[hwirq]) > > + msix_cfg_set(rp1, hwirq, MSIX_CFG_IACK); > > + > > + chained_irq_exit(chip, desc); > > +} > > + > > +static int rp1_irq_xlate(struct irq_domain *d, struct device_node *node, > > + const u32 *intspec, unsigned int intsize, > > + unsigned long *out_hwirq, unsigned int *out_type) > > +{ > > + struct rp1_dev *rp1 = d->host_data; > > + struct irq_data *pcie_irqd; > > + unsigned long hwirq; > > + int pcie_irq; > > + int ret; > > + > > + ret = irq_domain_xlate_twocell(d, node, intspec, intsize, > > + &hwirq, out_type); > > + if (ret) > > + return ret; > > + > > + pcie_irq = pci_irq_vector(rp1->pdev, hwirq); > > + pcie_irqd = irq_get_irq_data(pcie_irq); > > + rp1->pcie_irqds[hwirq] = pcie_irqd; > > + *out_hwirq = hwirq; > > + > > + return 0; > > +} > > + > > +static int rp1_irq_activate(struct irq_domain *d, struct irq_data *irqd, > > + bool reserve) > > +{ > > + struct rp1_dev *rp1 = d->host_data; > > + > > + msix_cfg_set(rp1, (unsigned int)irqd->hwirq, MSIX_CFG_ENABLE); > > + > > + return 0; > > +} > > + > > +static void rp1_irq_deactivate(struct irq_domain *d, struct irq_data *irqd) > > +{ > > + struct rp1_dev *rp1 = d->host_data; > > + > > + msix_cfg_clr(rp1, (unsigned int)irqd->hwirq, MSIX_CFG_ENABLE); > > +} > > + > > +static const struct irq_domain_ops rp1_domain_ops = { > > + .xlate = rp1_irq_xlate, > > + .activate = rp1_irq_activate, > > + .deactivate = rp1_irq_deactivate, > > +}; > > + > > +static void rp1_unregister_interrupts(struct pci_dev *pdev) > > +{ > > + struct rp1_dev *rp1 = pci_get_drvdata(pdev); > > + int irq, i; > > + > > + for (i = 0; i < RP1_INT_END; i++) { > > + irq = irq_find_mapping(rp1->domain, i); > > + irq_dispose_mapping(irq); > > + } > > new line Ack. > > > + irq_domain_remove(rp1->domain); > > + pci_free_irq_vectors(pdev); > > +} > > + > > +static int rp1_probe(struct pci_dev *pdev, const struct pci_device_id *id) > > +{ > > + u32 dtbo_size = __dtbo_rp1_pci_end - __dtbo_rp1_pci_begin; > > + void *dtbo_start = __dtbo_rp1_pci_begin; > > + struct device *dev = &pdev->dev; > > + struct device_node *rp1_node; > > + struct rp1_dev *rp1; > > + int err = 0; > > + int i; > > + > > + rp1_node = dev_of_node(dev); > > + if (!rp1_node) { > > + dev_err(dev, "Missing of_node for device\n"); > > + return -EINVAL; > > + } > > + > > + rp1 = devm_kzalloc(&pdev->dev, sizeof(*rp1), GFP_KERNEL); > > + if (!rp1) > > + return -ENOMEM; > > + > > + rp1->pdev = pdev; > > + rp1->dev = &pdev->dev; > > rp1->dev is used only once in dev_dbg macro. You could drop it and > extract struct device from rp1->pdev. Good catch, thanks! > > > + > > + if (pci_resource_len(pdev, 1) <= 0x10000) { > > + dev_err(&pdev->dev, > > + "Not initialised - is the firmware running?\n"); > > no need of a new line It goes past 80 columns, no? > > > + return -EINVAL; > > + } > > + > > + err = pcim_enable_device(pdev); > > + if (err < 0) { > > + dev_err(&pdev->dev, "Enabling PCI device has failed: %d", > > + err); > > ditto Ditto. > > > + return err; > > + } > > + > > + rp1->bar1 = pcim_iomap(pdev, 1, 0); > > + if (!rp1->bar1) { > > + dev_err(&pdev->dev, "Cannot map PCI BAR\n"); > > + return -EIO; > > + } > > + > > + pci_set_master(pdev); > > + > > + err = pci_alloc_irq_vectors(pdev, RP1_INT_END, RP1_INT_END, > > + PCI_IRQ_MSIX); > > ditto Ditto. > > > + if (err != RP1_INT_END) { > > an 'err' could be smaller then RP1_INT_END but still positive, thus > .probe will return positive error code. Ack. > > > + dev_err(&pdev->dev, "pci_alloc_irq_vectors failed - %d\n", err); > > + return err; > > + } > > + > > + pci_set_drvdata(pdev, rp1); > > + rp1->domain = irq_domain_add_linear(rp1_node, RP1_INT_END, > > + &rp1_domain_ops, rp1); > > irq_domain_add_linear() could fail, check for error ... Ack. > > > + > > + for (i = 0; i < RP1_INT_END; i++) { > > + int irq = irq_create_mapping(rp1->domain, i); > > irq_create_mapping() returns 'unsigned int', maybe something like this: > > unsigned int irq = irq_create_mapping(rp1->domain, i); > if (!irq) { > err = -EINVAL; (or -ENOMEM) > ... > } Right, thanks. > > > + > > + if (irq < 0) { > > + dev_err(&pdev->dev, "failed to create irq mapping\n"); > > + err = irq; > > + goto err_unload_overlay; > > goto err_unregister_interrupts; ? Ack. > > > + } > > new line, please Ack. > > > + irq_set_chip_and_handler(irq, &rp1_irq_chip, handle_level_irq); > > + irq_set_probe(irq); > > + irq_set_chained_handler_and_data(pci_irq_vector(pdev, i), > > + rp1_chained_handle_irq, rp1); > > + } > > + > > + err = of_overlay_fdt_apply(dtbo_start, dtbo_size, &rp1->ovcs_id, rp1_node); > > + if (err) > > + goto err_unregister_interrupts; > > + > > + err = of_platform_default_populate(rp1_node, NULL, dev); > > + if (err) > > + goto err_unload_overlay; > > + > > + return 0; > > + > > +err_unload_overlay: > > + of_overlay_remove(&rp1->ovcs_id); > > +err_unregister_interrupts: > > + rp1_unregister_interrupts(pdev); > > + > > + return err; > > +} > > + > > +static void rp1_remove(struct pci_dev *pdev) > > +{ > > + struct rp1_dev *rp1 = pci_get_drvdata(pdev); > > + struct device *dev = &pdev->dev; > > + > > + of_platform_depopulate(dev); > > + of_overlay_remove(&rp1->ovcs_id); > > + rp1_unregister_interrupts(pdev); > > +} > > + > > +static const struct pci_device_id dev_id_table[] = { > > + { PCI_DEVICE(PCI_VENDOR_ID_RPI, PCI_DEVICE_ID_RPI_RP1_C0), }, > > + { 0, } > > +}; > > +MODULE_DEVICE_TABLE(pci, dev_id_table); > > + > > +static struct pci_driver rp1_driver = { > > + .name = RP1_DRIVER_NAME, > > + .id_table = dev_id_table, > > + .probe = rp1_probe, > > + .remove = rp1_remove, > > +}; > > + > > +module_pci_driver(rp1_driver); > > + > > +MODULE_AUTHOR("Phil Elwell <phil@raspberrypi.com>"); > > +MODULE_AUTHOR("Andrea della Porta <andrea.porta@suse.com>"); > > +MODULE_DESCRIPTION("RP1 wrapper"); > > +MODULE_LICENSE("GPL"); > > diff --git a/drivers/misc/rp1/rp1_pci.h b/drivers/misc/rp1/rp1_pci.h > > new file mode 100644 > > index 000000000000..7982f13bad9b > > --- /dev/null > > +++ b/drivers/misc/rp1/rp1_pci.h > > @@ -0,0 +1,14 @@ > > +/* SPDX-License-Identifier: GPL-2.0 */ > > + > > +/* > > + * Copyright (c) 2018-24 Raspberry Pi Ltd. > > + * All rights reserved. > > + */ > > + > > +#ifndef _RP1_EXTERN_H_ > > +#define _RP1_EXTERN_H_ > > + > > +extern char __dtbo_rp1_pci_begin[]; > > +extern char __dtbo_rp1_pci_end[]; > > Could you point me where those two variables are used outside of rp1_pci.c? Nowhere else. For the rationale behind this please see: https://lore.kernel.org/all/e6e6c230-370f-4b04-8cb7-4158dd51efdc@lunn.ch/ and followups. Many thanks, Andrea > > ~Stan >
diff --git a/MAINTAINERS b/MAINTAINERS index 510a071ede78..032678fb2470 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19389,6 +19389,7 @@ F: Documentation/devicetree/bindings/misc/pci1de4,1.yaml F: Documentation/devicetree/bindings/pci/pci-ep-bus.yaml F: Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml F: drivers/clk/clk-rp1.c +F: drivers/misc/rp1/ F: drivers/pinctrl/pinctrl-rp1.c F: include/dt-bindings/clock/rp1.h F: include/dt-bindings/misc/rp1.h diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 3fe7e2a9bd29..ac85cb154100 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -628,4 +628,5 @@ source "drivers/misc/uacce/Kconfig" source "drivers/misc/pvpanic/Kconfig" source "drivers/misc/mchp_pci1xxxx/Kconfig" source "drivers/misc/keba/Kconfig" +source "drivers/misc/rp1/Kconfig" endmenu diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index a9f94525e181..ae86d69997b4 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -72,3 +72,4 @@ obj-$(CONFIG_TPS6594_PFSM) += tps6594-pfsm.o obj-$(CONFIG_NSM) += nsm.o obj-$(CONFIG_MARVELL_CN10K_DPI) += mrvl_cn10k_dpi.o obj-y += keba/ +obj-$(CONFIG_MISC_RP1) += rp1/ diff --git a/drivers/misc/rp1/Kconfig b/drivers/misc/rp1/Kconfig new file mode 100644 index 000000000000..39c4aa4bf634 --- /dev/null +++ b/drivers/misc/rp1/Kconfig @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# RaspberryPi RP1 misc device +# + +config MISC_RP1 + tristate "RaspberryPi RP1 PCIe support" + depends on OF_IRQ && PCI_MSI && PCI_QUIRKS + select OF_OVERLAY + select PCI_DYNAMIC_OF_NODES + help + Support the RP1 peripheral chip found on Raspberry Pi 5 board. + + This device supports several sub-devices including e.g. Ethernet + controller, USB controller, I2C, SPI and UART. + + The driver is responsible for enabling the DT node once the PCIe + endpoint has been configured, and handling interrupts. + + This driver uses an overlay to load other drivers to support for + RP1 internal sub-devices. diff --git a/drivers/misc/rp1/Makefile b/drivers/misc/rp1/Makefile new file mode 100644 index 000000000000..508b4cb05627 --- /dev/null +++ b/drivers/misc/rp1/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_MISC_RP1) += rp1-pci.o +rp1-pci-objs := rp1_pci.o rp1-pci.dtbo.o diff --git a/drivers/misc/rp1/rp1-pci.dtso b/drivers/misc/rp1/rp1-pci.dtso new file mode 100644 index 000000000000..0bf2f4bb18e6 --- /dev/null +++ b/drivers/misc/rp1/rp1-pci.dtso @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/* the dts overlay is included from the dts directory so + * it can be possible to check it with CHECK_DTBS while + * also compile it from the driver source directory. + */ + +#include "arm64/broadcom/rp1.dtso" diff --git a/drivers/misc/rp1/rp1_pci.c b/drivers/misc/rp1/rp1_pci.c new file mode 100644 index 000000000000..30d7a15dc7f1 --- /dev/null +++ b/drivers/misc/rp1/rp1_pci.c @@ -0,0 +1,357 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018-24 Raspberry Pi Ltd. + * All rights reserved. + */ + +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/irqdomain.h> +#include <linux/module.h> +#include <linux/msi.h> +#include <linux/of_platform.h> +#include <linux/pci.h> +#include <linux/platform_device.h> + +#include "rp1_pci.h" + +#define RP1_DRIVER_NAME "rp1" + +#define RP1_HW_IRQ_MASK GENMASK(5, 0) + +#define REG_SET 0x800 +#define REG_CLR 0xc00 + +/* MSI-X CFG registers start at 0x8 */ +#define MSIX_CFG(x) (0x8 + (4 * (x))) + +#define MSIX_CFG_IACK_EN BIT(3) +#define MSIX_CFG_IACK BIT(2) +#define MSIX_CFG_ENABLE BIT(0) + +/* Address map */ +#define RP1_PCIE_APBS_BASE 0x108000 + +/* Interrupts */ +#define RP1_INT_IO_BANK0 0 +#define RP1_INT_IO_BANK1 1 +#define RP1_INT_IO_BANK2 2 +#define RP1_INT_AUDIO_IN 3 +#define RP1_INT_AUDIO_OUT 4 +#define RP1_INT_PWM0 5 +#define RP1_INT_ETH 6 +#define RP1_INT_I2C0 7 +#define RP1_INT_I2C1 8 +#define RP1_INT_I2C2 9 +#define RP1_INT_I2C3 10 +#define RP1_INT_I2C4 11 +#define RP1_INT_I2C5 12 +#define RP1_INT_I2C6 13 +#define RP1_INT_I2S0 14 +#define RP1_INT_I2S1 15 +#define RP1_INT_I2S2 16 +#define RP1_INT_SDIO0 17 +#define RP1_INT_SDIO1 18 +#define RP1_INT_SPI0 19 +#define RP1_INT_SPI1 20 +#define RP1_INT_SPI2 21 +#define RP1_INT_SPI3 22 +#define RP1_INT_SPI4 23 +#define RP1_INT_SPI5 24 +#define RP1_INT_UART0 25 +#define RP1_INT_TIMER_0 26 +#define RP1_INT_TIMER_1 27 +#define RP1_INT_TIMER_2 28 +#define RP1_INT_TIMER_3 29 +#define RP1_INT_USBHOST0 30 +#define RP1_INT_USBHOST0_0 31 +#define RP1_INT_USBHOST0_1 32 +#define RP1_INT_USBHOST0_2 33 +#define RP1_INT_USBHOST0_3 34 +#define RP1_INT_USBHOST1 35 +#define RP1_INT_USBHOST1_0 36 +#define RP1_INT_USBHOST1_1 37 +#define RP1_INT_USBHOST1_2 38 +#define RP1_INT_USBHOST1_3 39 +#define RP1_INT_DMA 40 +#define RP1_INT_PWM1 41 +#define RP1_INT_UART1 42 +#define RP1_INT_UART2 43 +#define RP1_INT_UART3 44 +#define RP1_INT_UART4 45 +#define RP1_INT_UART5 46 +#define RP1_INT_MIPI0 47 +#define RP1_INT_MIPI1 48 +#define RP1_INT_VIDEO_OUT 49 +#define RP1_INT_PIO_0 50 +#define RP1_INT_PIO_1 51 +#define RP1_INT_ADC_FIFO 52 +#define RP1_INT_PCIE_OUT 53 +#define RP1_INT_SPI6 54 +#define RP1_INT_SPI7 55 +#define RP1_INT_SPI8 56 +#define RP1_INT_SYSCFG 58 +#define RP1_INT_CLOCKS_DEFAULT 59 +#define RP1_INT_VBUSCTRL 60 +#define RP1_INT_PROC_MISC 57 +#define RP1_INT_END 61 + +struct rp1_dev { + struct pci_dev *pdev; + struct device *dev; + struct irq_domain *domain; + struct irq_data *pcie_irqds[64]; + void __iomem *bar1; + int ovcs_id; + bool level_triggered_irq[RP1_INT_END]; +}; + +static void msix_cfg_set(struct rp1_dev *rp1, unsigned int hwirq, u32 value) +{ + iowrite32(value, rp1->bar1 + RP1_PCIE_APBS_BASE + REG_SET + MSIX_CFG(hwirq)); +} + +static void msix_cfg_clr(struct rp1_dev *rp1, unsigned int hwirq, u32 value) +{ + iowrite32(value, rp1->bar1 + RP1_PCIE_APBS_BASE + REG_CLR + MSIX_CFG(hwirq)); +} + +static void rp1_mask_irq(struct irq_data *irqd) +{ + struct rp1_dev *rp1 = irqd->domain->host_data; + struct irq_data *pcie_irqd = rp1->pcie_irqds[irqd->hwirq]; + + pci_msi_mask_irq(pcie_irqd); +} + +static void rp1_unmask_irq(struct irq_data *irqd) +{ + struct rp1_dev *rp1 = irqd->domain->host_data; + struct irq_data *pcie_irqd = rp1->pcie_irqds[irqd->hwirq]; + + pci_msi_unmask_irq(pcie_irqd); +} + +static int rp1_irq_set_type(struct irq_data *irqd, unsigned int type) +{ + struct rp1_dev *rp1 = irqd->domain->host_data; + unsigned int hwirq = (unsigned int)irqd->hwirq; + + switch (type) { + case IRQ_TYPE_LEVEL_HIGH: + dev_dbg(rp1->dev, "MSIX IACK EN for irq %d\n", hwirq); + msix_cfg_set(rp1, hwirq, MSIX_CFG_IACK_EN); + rp1->level_triggered_irq[hwirq] = true; + break; + case IRQ_TYPE_EDGE_RISING: + msix_cfg_clr(rp1, hwirq, MSIX_CFG_IACK_EN); + rp1->level_triggered_irq[hwirq] = false; + break; + default: + return -EINVAL; + } + + return 0; +} + +static struct irq_chip rp1_irq_chip = { + .name = "rp1_irq_chip", + .irq_mask = rp1_mask_irq, + .irq_unmask = rp1_unmask_irq, + .irq_set_type = rp1_irq_set_type, +}; + +static void rp1_chained_handle_irq(struct irq_desc *desc) +{ + unsigned int hwirq = desc->irq_data.hwirq & RP1_HW_IRQ_MASK; + struct rp1_dev *rp1 = irq_desc_get_handler_data(desc); + struct irq_chip *chip = irq_desc_get_chip(desc); + int virq; + + chained_irq_enter(chip, desc); + + virq = irq_find_mapping(rp1->domain, hwirq); + generic_handle_irq(virq); + if (rp1->level_triggered_irq[hwirq]) + msix_cfg_set(rp1, hwirq, MSIX_CFG_IACK); + + chained_irq_exit(chip, desc); +} + +static int rp1_irq_xlate(struct irq_domain *d, struct device_node *node, + const u32 *intspec, unsigned int intsize, + unsigned long *out_hwirq, unsigned int *out_type) +{ + struct rp1_dev *rp1 = d->host_data; + struct irq_data *pcie_irqd; + unsigned long hwirq; + int pcie_irq; + int ret; + + ret = irq_domain_xlate_twocell(d, node, intspec, intsize, + &hwirq, out_type); + if (ret) + return ret; + + pcie_irq = pci_irq_vector(rp1->pdev, hwirq); + pcie_irqd = irq_get_irq_data(pcie_irq); + rp1->pcie_irqds[hwirq] = pcie_irqd; + *out_hwirq = hwirq; + + return 0; +} + +static int rp1_irq_activate(struct irq_domain *d, struct irq_data *irqd, + bool reserve) +{ + struct rp1_dev *rp1 = d->host_data; + + msix_cfg_set(rp1, (unsigned int)irqd->hwirq, MSIX_CFG_ENABLE); + + return 0; +} + +static void rp1_irq_deactivate(struct irq_domain *d, struct irq_data *irqd) +{ + struct rp1_dev *rp1 = d->host_data; + + msix_cfg_clr(rp1, (unsigned int)irqd->hwirq, MSIX_CFG_ENABLE); +} + +static const struct irq_domain_ops rp1_domain_ops = { + .xlate = rp1_irq_xlate, + .activate = rp1_irq_activate, + .deactivate = rp1_irq_deactivate, +}; + +static void rp1_unregister_interrupts(struct pci_dev *pdev) +{ + struct rp1_dev *rp1 = pci_get_drvdata(pdev); + int irq, i; + + for (i = 0; i < RP1_INT_END; i++) { + irq = irq_find_mapping(rp1->domain, i); + irq_dispose_mapping(irq); + } + irq_domain_remove(rp1->domain); + pci_free_irq_vectors(pdev); +} + +static int rp1_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + u32 dtbo_size = __dtbo_rp1_pci_end - __dtbo_rp1_pci_begin; + void *dtbo_start = __dtbo_rp1_pci_begin; + struct device *dev = &pdev->dev; + struct device_node *rp1_node; + struct rp1_dev *rp1; + int err = 0; + int i; + + rp1_node = dev_of_node(dev); + if (!rp1_node) { + dev_err(dev, "Missing of_node for device\n"); + return -EINVAL; + } + + rp1 = devm_kzalloc(&pdev->dev, sizeof(*rp1), GFP_KERNEL); + if (!rp1) + return -ENOMEM; + + rp1->pdev = pdev; + rp1->dev = &pdev->dev; + + if (pci_resource_len(pdev, 1) <= 0x10000) { + dev_err(&pdev->dev, + "Not initialised - is the firmware running?\n"); + return -EINVAL; + } + + err = pcim_enable_device(pdev); + if (err < 0) { + dev_err(&pdev->dev, "Enabling PCI device has failed: %d", + err); + return err; + } + + rp1->bar1 = pcim_iomap(pdev, 1, 0); + if (!rp1->bar1) { + dev_err(&pdev->dev, "Cannot map PCI BAR\n"); + return -EIO; + } + + pci_set_master(pdev); + + err = pci_alloc_irq_vectors(pdev, RP1_INT_END, RP1_INT_END, + PCI_IRQ_MSIX); + if (err != RP1_INT_END) { + dev_err(&pdev->dev, "pci_alloc_irq_vectors failed - %d\n", err); + return err; + } + + pci_set_drvdata(pdev, rp1); + rp1->domain = irq_domain_add_linear(rp1_node, RP1_INT_END, + &rp1_domain_ops, rp1); + + for (i = 0; i < RP1_INT_END; i++) { + int irq = irq_create_mapping(rp1->domain, i); + + if (irq < 0) { + dev_err(&pdev->dev, "failed to create irq mapping\n"); + err = irq; + goto err_unload_overlay; + } + irq_set_chip_and_handler(irq, &rp1_irq_chip, handle_level_irq); + irq_set_probe(irq); + irq_set_chained_handler_and_data(pci_irq_vector(pdev, i), + rp1_chained_handle_irq, rp1); + } + + err = of_overlay_fdt_apply(dtbo_start, dtbo_size, &rp1->ovcs_id, rp1_node); + if (err) + goto err_unregister_interrupts; + + err = of_platform_default_populate(rp1_node, NULL, dev); + if (err) + goto err_unload_overlay; + + return 0; + +err_unload_overlay: + of_overlay_remove(&rp1->ovcs_id); +err_unregister_interrupts: + rp1_unregister_interrupts(pdev); + + return err; +} + +static void rp1_remove(struct pci_dev *pdev) +{ + struct rp1_dev *rp1 = pci_get_drvdata(pdev); + struct device *dev = &pdev->dev; + + of_platform_depopulate(dev); + of_overlay_remove(&rp1->ovcs_id); + rp1_unregister_interrupts(pdev); +} + +static const struct pci_device_id dev_id_table[] = { + { PCI_DEVICE(PCI_VENDOR_ID_RPI, PCI_DEVICE_ID_RPI_RP1_C0), }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, dev_id_table); + +static struct pci_driver rp1_driver = { + .name = RP1_DRIVER_NAME, + .id_table = dev_id_table, + .probe = rp1_probe, + .remove = rp1_remove, +}; + +module_pci_driver(rp1_driver); + +MODULE_AUTHOR("Phil Elwell <phil@raspberrypi.com>"); +MODULE_AUTHOR("Andrea della Porta <andrea.porta@suse.com>"); +MODULE_DESCRIPTION("RP1 wrapper"); +MODULE_LICENSE("GPL"); diff --git a/drivers/misc/rp1/rp1_pci.h b/drivers/misc/rp1/rp1_pci.h new file mode 100644 index 000000000000..7982f13bad9b --- /dev/null +++ b/drivers/misc/rp1/rp1_pci.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* + * Copyright (c) 2018-24 Raspberry Pi Ltd. + * All rights reserved. + */ + +#ifndef _RP1_EXTERN_H_ +#define _RP1_EXTERN_H_ + +extern char __dtbo_rp1_pci_begin[]; +extern char __dtbo_rp1_pci_end[]; + +#endif diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index dccb60c1d9cc..41e77d94ff73 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -6266,6 +6266,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0xa76e, dpc_log_size); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_XILINX, 0x5020, of_pci_make_dev_node); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_XILINX, 0x5021, of_pci_make_dev_node); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REDHAT, 0x0005, of_pci_make_dev_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_RPI, PCI_DEVICE_ID_RPI_RP1_C0, of_pci_make_dev_node); /* * Devices known to require a longer delay before first config space access diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 4cf6aaed5f35..c7e6cd10ac52 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2611,6 +2611,9 @@ #define PCI_VENDOR_ID_TEKRAM 0x1de1 #define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29 +#define PCI_VENDOR_ID_RPI 0x1de4 +#define PCI_DEVICE_ID_RPI_RP1_C0 0x0001 + #define PCI_VENDOR_ID_ALIBABA 0x1ded #define PCI_VENDOR_ID_CXL 0x1e98
The RaspberryPi RP1 is a PCI multi function device containing peripherals ranging from Ethernet to USB controller, I2C, SPI and others. Implement a bare minimum driver to operate the RP1, leveraging actual OF based driver implementations for the on-board peripherals by loading a devicetree overlay during driver probe. The peripherals are accessed by mapping MMIO registers starting from PCI BAR1 region. With the overlay approach we can achieve more generic and agnostic approach to managing this chipset, being that it is a PCI endpoint and could possibly be reused in other hw implementations. The presented approach is also used by Bootlin's Microchip LAN966x patchset (see link) as well, for a similar chipset. Since the gpio line names should be provided by the user, there is an interface through configfs that allows the userspace to load a DT overlay that will provide gpio-line-names property. The interface can be invoked like this: cat rpi-rp1-gpios-5-b.dtbo > /sys/kernel/config/rp1-cfg/gpio_set_names and is designed to be similar to what users are already used to from distro with downstream kernel. For reasons why this driver is contained in drivers/misc, please check the links. This driver is heavily based on downstream code from RaspberryPi Foundation, and the original author is Phil Elwell. Link: https://datasheets.raspberrypi.com/rp1/rp1-peripherals.pdf Link: https://lore.kernel.org/all/20240612140208.GC1504919@google.com/ Link: https://lore.kernel.org/all/83f7fa09-d0e6-4f36-a27d-cee08979be2a@app.fastmail.com/ Link: https://lore.kernel.org/all/2024081356-mutable-everyday-6f9d@gregkh/ Link: https://lore.kernel.org/all/20240808154658.247873-1-herve.codina@bootlin.com/ Signed-off-by: Andrea della Porta <andrea.porta@suse.com> --- MAINTAINERS | 1 + drivers/misc/Kconfig | 1 + drivers/misc/Makefile | 1 + drivers/misc/rp1/Kconfig | 21 ++ drivers/misc/rp1/Makefile | 3 + drivers/misc/rp1/rp1-pci.dtso | 8 + drivers/misc/rp1/rp1_pci.c | 357 ++++++++++++++++++++++++++++++++++ drivers/misc/rp1/rp1_pci.h | 14 ++ drivers/pci/quirks.c | 1 + include/linux/pci_ids.h | 3 + 10 files changed, 410 insertions(+) create mode 100644 drivers/misc/rp1/Kconfig create mode 100644 drivers/misc/rp1/Makefile create mode 100644 drivers/misc/rp1/rp1-pci.dtso create mode 100644 drivers/misc/rp1/rp1_pci.c create mode 100644 drivers/misc/rp1/rp1_pci.h