| Message ID | 6e245e545a2927d2bd4bbc7df9197e6669ccce93.1641900122.git.matthias.schiffer@ew.tq-group.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] arm64: dts: ti: k3-am65: disable optional peripherals by default | expand |
On 11.01.22 12:25, Matthias Schiffer wrote: > Specifying partitions directly in the flash node is deprecated, a > fixed-partitions node should be used instead. Therefore, it doesn't make > sense to have these properties in the flash nodes. > > Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> > --- > arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 2 -- > arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 8 ++------ > 2 files changed, 2 insertions(+), 8 deletions(-) > > diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi > index 873c123c611e..7eca697e1ca1 100644 > --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi > @@ -623,8 +623,6 @@ flash@0 { > cdns,tchsh-ns = <60>; > cdns,tslch-ns = <60>; > cdns,read-delay = <2>; > - #address-cells = <1>; > - #size-cells = <1>; > }; > }; > > diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts > index 821ee7f2eff0..9c06da9d6d8f 100644 > --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts > +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts > @@ -340,14 +340,12 @@ &main_spi0 { > ti,pindir-d0-out-d1-in; > status = "okay"; > > - flash@0{ > + flash@0 { > compatible = "jedec,spi-nor"; > reg = <0x0>; > spi-tx-bus-width = <1>; > spi-rx-bus-width = <1>; > spi-max-frequency = <48000000>; > - #address-cells = <1>; > - #size-cells= <1>; > }; > }; > > @@ -442,7 +440,7 @@ &ospi0 { > pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; > status = "okay"; > > - flash@0{ > + flash@0 { > compatible = "jedec,spi-nor"; > reg = <0x0>; > spi-tx-bus-width = <8>; > @@ -453,8 +451,6 @@ flash@0{ > cdns,tchsh-ns = <60>; > cdns,tslch-ns = <60>; > cdns,read-delay = <0>; > - #address-cells = <1>; > - #size-cells = <1>; > }; > }; > For the iot2050 bits: Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi index 873c123c611e..7eca697e1ca1 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi @@ -623,8 +623,6 @@ flash@0 { cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <2>; - #address-cells = <1>; - #size-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index 821ee7f2eff0..9c06da9d6d8f 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -340,14 +340,12 @@ &main_spi0 { ti,pindir-d0-out-d1-in; status = "okay"; - flash@0{ + flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-tx-bus-width = <1>; spi-rx-bus-width = <1>; spi-max-frequency = <48000000>; - #address-cells = <1>; - #size-cells= <1>; }; }; @@ -442,7 +440,7 @@ &ospi0 { pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; status = "okay"; - flash@0{ + flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-tx-bus-width = <8>; @@ -453,8 +451,6 @@ flash@0{ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <0>; - #address-cells = <1>; - #size-cells = <1>; }; };
Specifying partitions directly in the flash node is deprecated, a fixed-partitions node should be used instead. Therefore, it doesn't make sense to have these properties in the flash nodes. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> --- arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 2 -- arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 8 ++------ 2 files changed, 2 insertions(+), 8 deletions(-)