@@ -2,7 +2,7 @@ What: /sys/kernel/debug/moxtet/input
Date: March 2019
KernelVersion: 5.3
Contact: Marek Behún <marek.behun@nic.cz>
-Description: (R) Read input from the shift registers, in hexadecimal.
+Description: (Read) Read input from the shift registers, in hexadecimal.
Returns N+1 bytes, where N is the number of Moxtet connected
modules. The first byte is from the CPU board itself.
@@ -4,10 +4,11 @@ KernelVersion: 5.8
Contact: Marek Behún <marek.behun@nic.cz>
Description:
- === ===========================================================
- (W) Message to sign with the ECDSA private key stored in
- device's OTP. The message must be exactly 64 bytes (since
- this is intended for SHA-512 hashes).
- (R) The resulting signature, 136 bytes. This contains the R and
- S values of the ECDSA signature, both in big-endian format.
- === ===========================================================
+ ======= ===========================================================
+ (Write) Message to sign with the ECDSA private key stored in
+ device's OTP. The message must be exactly 64 bytes
+ (since this is intended for SHA-512 hashes).
+ (Read) The resulting signature, 136 bytes. This contains the
+ R and S values of the ECDSA signature, both in
+ big-endian format.
+ ======= ===========================================================
@@ -8,50 +8,50 @@ What: /sys/bus/coresight/devices/<cti-name>/powered
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (R) Indicate if the CTI hardware is powered.
+Description: (Read) Indicate if the CTI hardware is powered.
What: /sys/bus/coresight/devices/<cti-name>/ctmid
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (R) Display the associated CTM ID
+Description: (Read) Display the associated CTM ID
What: /sys/bus/coresight/devices/<cti-name>/nr_trigger_cons
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (R) Number of devices connected to triggers on this CTI
+Description: (Read) Number of devices connected to triggers on this CTI
What: /sys/bus/coresight/devices/<cti-name>/triggers<N>/name
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (R) Name of connected device <N>
+Description: (Read) Name of connected device <N>
What: /sys/bus/coresight/devices/<cti-name>/triggers<N>/in_signals
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (R) Input trigger signals from connected device <N>
+Description: (Read) Input trigger signals from connected device <N>
What: /sys/bus/coresight/devices/<cti-name>/triggers<N>/in_types
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (R) Functional types for the input trigger signals
+Description: (Read) Functional types for the input trigger signals
from connected device <N>
What: /sys/bus/coresight/devices/<cti-name>/triggers<N>/out_signals
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (R) Output trigger signals to connected device <N>
+Description: (Read) Output trigger signals to connected device <N>
What: /sys/bus/coresight/devices/<cti-name>/triggers<N>/out_types
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (R) Functional types for the output trigger signals
+Description: (Read) Functional types for the output trigger signals
to connected device <N>
What: /sys/bus/coresight/devices/<cti-name>/regs/inout_sel
@@ -88,7 +88,7 @@ What: /sys/bus/coresight/devices/<cti-name>/regs/intack
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (W) Write the INTACK register.
+Description: (Write) Write the INTACK register.
What: /sys/bus/coresight/devices/<cti-name>/regs/appset
Date: March 2020
@@ -101,99 +101,99 @@ What: /sys/bus/coresight/devices/<cti-name>/regs/appclear
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (W) Write APPCLEAR register to deactivate channel.
+Description: (Write) Write APPCLEAR register to deactivate channel.
What: /sys/bus/coresight/devices/<cti-name>/regs/apppulse
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (W) Write APPPULSE to pulse a channel active for one clock
+Description: (Write) Write APPPULSE to pulse a channel active for one clock
cycle.
What: /sys/bus/coresight/devices/<cti-name>/regs/chinstatus
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (R) Read current status of channel inputs.
+Description: (Read) Read current status of channel inputs.
What: /sys/bus/coresight/devices/<cti-name>/regs/choutstatus
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (R) read current status of channel outputs.
+Description: (Read) read current status of channel outputs.
What: /sys/bus/coresight/devices/<cti-name>/regs/triginstatus
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (R) read current status of input trigger signals
+Description: (Read) read current status of input trigger signals
What: /sys/bus/coresight/devices/<cti-name>/regs/trigoutstatus
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (R) read current status of output trigger signals.
+Description: (Read) read current status of output trigger signals.
What: /sys/bus/coresight/devices/<cti-name>/channels/trigin_attach
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (W) Attach a CTI input trigger to a CTM channel.
+Description: (Write) Attach a CTI input trigger to a CTM channel.
What: /sys/bus/coresight/devices/<cti-name>/channels/trigin_detach
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (W) Detach a CTI input trigger from a CTM channel.
+Description: (Write) Detach a CTI input trigger from a CTM channel.
What: /sys/bus/coresight/devices/<cti-name>/channels/trigout_attach
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (W) Attach a CTI output trigger to a CTM channel.
+Description: (Write) Attach a CTI output trigger to a CTM channel.
What: /sys/bus/coresight/devices/<cti-name>/channels/trigout_detach
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (W) Detach a CTI output trigger from a CTM channel.
+Description: (Write) Detach a CTI output trigger from a CTM channel.
What: /sys/bus/coresight/devices/<cti-name>/channels/chan_gate_enable
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (RW) Enable CTIGATE for single channel (W) or list enabled
+Description: (RW) Enable CTIGATE for single channel (Write) or list enabled
channels through the gate (R).
What: /sys/bus/coresight/devices/<cti-name>/channels/chan_gate_disable
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (W) Disable CTIGATE for single channel.
+Description: (Write) Disable CTIGATE for single channel.
What: /sys/bus/coresight/devices/<cti-name>/channels/chan_set
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (W) Activate a single channel.
+Description: (Write) Activate a single channel.
What: /sys/bus/coresight/devices/<cti-name>/channels/chan_clear
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (W) Deactivate a single channel.
+Description: (Write) Deactivate a single channel.
What: /sys/bus/coresight/devices/<cti-name>/channels/chan_pulse
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (W) Pulse a single channel - activate for a single clock cycle.
+Description: (Write) Pulse a single channel - activate for a single clock cycle.
What: /sys/bus/coresight/devices/<cti-name>/channels/trigout_filtered
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (R) List of output triggers filtered across all connections.
+Description: (Read) List of output triggers filtered across all connections.
What: /sys/bus/coresight/devices/<cti-name>/channels/trig_filter_enable
Date: March 2020
@@ -205,13 +205,13 @@ What: /sys/bus/coresight/devices/<cti-name>/channels/chan_inuse
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (R) show channels with at least one attached trigger signal.
+Description: (Read) show channels with at least one attached trigger signal.
What: /sys/bus/coresight/devices/<cti-name>/channels/chan_free
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (R) show channels with no attached trigger signals.
+Description: (Read) show channels with no attached trigger signals.
What: /sys/bus/coresight/devices/<cti-name>/channels/chan_xtrigs_sel
Date: March 2020
@@ -224,18 +224,18 @@ What: /sys/bus/coresight/devices/<cti-name>/channels/chan_xtrigs_in
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (R) Read to see input triggers connected to selected view
+Description: (Read) Read to see input triggers connected to selected view
channel.
What: /sys/bus/coresight/devices/<cti-name>/channels/chan_xtrigs_out
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (R) Read to see output triggers connected to selected view
+Description: (Read) Read to see output triggers connected to selected view
channel.
What: /sys/bus/coresight/devices/<cti-name>/channels/chan_xtrigs_reset
Date: March 2020
KernelVersion 5.7
Contact: Mike Leach or Mathieu Poirier
-Description: (W) Clear all channel / trigger programming.
+Description: (Write) Clear all channel / trigger programming.
@@ -23,21 +23,21 @@ What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/rdp
Date: March 2016
KernelVersion: 4.7
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Defines the depth, in words, of the trace RAM in powers of
+Description: (Read) Defines the depth, in words, of the trace RAM in powers of
2. The value is read directly from HW register RDP, 0x004.
What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/sts
Date: March 2016
KernelVersion: 4.7
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Shows the value held by the ETB status register. The value
+Description: (Read) Shows the value held by the ETB status register. The value
is read directly from HW register STS, 0x00C.
What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/rrp
Date: March 2016
KernelVersion: 4.7
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Shows the value held by the ETB RAM Read Pointer register
+Description: (Read) Shows the value held by the ETB RAM Read Pointer register
that is used to read entries from the Trace RAM over the APB
interface. The value is read directly from HW register RRP,
0x014.
@@ -46,7 +46,7 @@ What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/rwp
Date: March 2016
KernelVersion: 4.7
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Shows the value held by the ETB RAM Write Pointer register
+Description: (Read) Shows the value held by the ETB RAM Write Pointer register
that is used to sets the write pointer to write entries from
the CoreSight bus into the Trace RAM. The value is read directly
from HW register RWP, 0x018.
@@ -55,21 +55,21 @@ What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/trg
Date: March 2016
KernelVersion: 4.7
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Similar to "trigger_cntr" above except that this value is
+Description: (Read) Similar to "trigger_cntr" above except that this value is
read directly from HW register TRG, 0x01C.
What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/ctl
Date: March 2016
KernelVersion: 4.7
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Shows the value held by the ETB Control register. The value
+Description: (Read) Shows the value held by the ETB Control register. The value
is read directly from HW register CTL, 0x020.
What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/ffsr
Date: March 2016
KernelVersion: 4.7
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Shows the value held by the ETB Formatter and Flush Status
+Description: (Read) Shows the value held by the ETB Formatter and Flush Status
register. The value is read directly from HW register FFSR,
0x300.
@@ -77,6 +77,6 @@ What: /sys/bus/coresight/devices/<memory_map>.etb/mgmt/ffcr
Date: March 2016
KernelVersion: 4.7
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Shows the value held by the ETB Formatter and Flush Control
+Description: (Read) Shows the value held by the ETB Formatter and Flush Control
register. The value is read directly from HW register FFCR,
0x304.
@@ -146,28 +146,28 @@ What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/nr_addr_cmp
Date: November 2014
KernelVersion: 3.19
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Provides the number of address comparators pairs accessible
+Description: (Read) Provides the number of address comparators pairs accessible
on a trace unit, as specified by bit 3:0 of register ETMCCR.
What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/nr_cntr
Date: November 2014
KernelVersion: 3.19
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Provides the number of counters accessible on a trace unit,
+Description: (Read) Provides the number of counters accessible on a trace unit,
as specified by bit 15:13 of register ETMCCR.
What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/nr_ctxid_cmp
Date: November 2014
KernelVersion: 3.19
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Provides the number of context ID comparator available on a
+Description: (Read) Provides the number of context ID comparator available on a
trace unit, as specified by bit 25:24 of register ETMCCR.
What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/reset
Date: November 2014
KernelVersion: 3.19
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (W) Cancels all configuration on a trace unit and set it back
+Description: (Write) Cancels all configuration on a trace unit and set it back
to its boot configuration.
What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/seq_12_event
@@ -216,7 +216,7 @@ What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/curr_seq_state
Date: November 2014
KernelVersion: 3.19
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Holds the current state of the sequencer.
+Description: (Read) Holds the current state of the sequencer.
What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/sync_freq
Date: November 2014
@@ -12,75 +12,75 @@ What: /sys/bus/coresight/devices/etm<N>/cpu
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) The CPU this tracing entity is associated with.
+Description: (Read) The CPU this tracing entity is associated with.
What: /sys/bus/coresight/devices/etm<N>/nr_pe_cmp
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Indicates the number of PE comparator inputs that are
+Description: (Read) Indicates the number of PE comparator inputs that are
available for tracing.
What: /sys/bus/coresight/devices/etm<N>/nr_addr_cmp
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Indicates the number of address comparator pairs that are
+Description: (Read) Indicates the number of address comparator pairs that are
available for tracing.
What: /sys/bus/coresight/devices/etm<N>/nr_cntr
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Indicates the number of counters that are available for
+Description: (Read) Indicates the number of counters that are available for
tracing.
What: /sys/bus/coresight/devices/etm<N>/nr_ext_inp
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Indicates how many external inputs are implemented.
+Description: (Read) Indicates how many external inputs are implemented.
What: /sys/bus/coresight/devices/etm<N>/numcidc
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Indicates the number of Context ID comparators that are
+Description: (Read) Indicates the number of Context ID comparators that are
available for tracing.
What: /sys/bus/coresight/devices/etm<N>/numvmidc
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Indicates the number of VMID comparators that are available
+Description: (Read) Indicates the number of VMID comparators that are available
for tracing.
What: /sys/bus/coresight/devices/etm<N>/nrseqstate
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Indicates the number of sequencer states that are
+Description: (Read) Indicates the number of sequencer states that are
implemented.
What: /sys/bus/coresight/devices/etm<N>/nr_resource
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Indicates the number of resource selection pairs that are
+Description: (Read) Indicates the number of resource selection pairs that are
available for tracing.
What: /sys/bus/coresight/devices/etm<N>/nr_ss_cmp
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Indicates the number of single-shot comparator controls that
+Description: (Read) Indicates the number of single-shot comparator controls that
are available for tracing.
What: /sys/bus/coresight/devices/etm<N>/reset
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (W) Cancels all configuration on a trace unit and set it back
+Description: (Write) Cancels all configuration on a trace unit and set it back
to its boot configuration.
What: /sys/bus/coresight/devices/etm<N>/mode
@@ -300,7 +300,7 @@ What: /sys/bus/coresight/devices/etm<N>/addr_cmp_view
Date: December 2019
KernelVersion: 5.5
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Print the current settings for the selected address
+Description: (Read) Print the current settings for the selected address
comparator.
What: /sys/bus/coresight/devices/etm<N>/sshot_idx
@@ -319,7 +319,7 @@ What: /sys/bus/coresight/devices/etm<N>/sshot_status
Date: December 2019
KernelVersion: 5.5
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Print the current value of the selected single shot
+Description: (Read) Print the current value of the selected single shot
status register.
What: /sys/bus/coresight/devices/etm<N>/sshot_pe_ctrl
@@ -333,111 +333,111 @@ What: /sys/bus/coresight/devices/etm<N>/mgmt/trcoslsr
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Print the content of the OS Lock Status Register (0x304).
+Description: (Read) Print the content of the OS Lock Status Register (0x304).
The value it taken directly from the HW.
What: /sys/bus/coresight/devices/etm<N>/mgmt/trcpdcr
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Print the content of the Power Down Control Register
+Description: (Read) Print the content of the Power Down Control Register
(0x310). The value is taken directly from the HW.
What: /sys/bus/coresight/devices/etm<N>/mgmt/trcpdsr
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Print the content of the Power Down Status Register
+Description: (Read) Print the content of the Power Down Status Register
(0x314). The value is taken directly from the HW.
What: /sys/bus/coresight/devices/etm<N>/mgmt/trclsr
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Print the content of the SW Lock Status Register
+Description: (Read) Print the content of the SW Lock Status Register
(0xFB4). The value is taken directly from the HW.
What: /sys/bus/coresight/devices/etm<N>/mgmt/trcauthstatus
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Print the content of the Authentication Status Register
+Description: (Read) Print the content of the Authentication Status Register
(0xFB8). The value is taken directly from the HW.
What: /sys/bus/coresight/devices/etm<N>/mgmt/trcdevid
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Print the content of the Device ID Register
+Description: (Read) Print the content of the Device ID Register
(0xFC8). The value is taken directly from the HW.
What: /sys/bus/coresight/devices/etm<N>/mgmt/trcdevtype
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Print the content of the Device Type Register
+Description: (Read) Print the content of the Device Type Register
(0xFCC). The value is taken directly from the HW.
What: /sys/bus/coresight/devices/etm<N>/mgmt/trcpidr0
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Print the content of the Peripheral ID0 Register
+Description: (Read) Print the content of the Peripheral ID0 Register
(0xFE0). The value is taken directly from the HW.
What: /sys/bus/coresight/devices/etm<N>/mgmt/trcpidr1
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Print the content of the Peripheral ID1 Register
+Description: (Read) Print the content of the Peripheral ID1 Register
(0xFE4). The value is taken directly from the HW.
What: /sys/bus/coresight/devices/etm<N>/mgmt/trcpidr2
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Print the content of the Peripheral ID2 Register
+Description: (Read) Print the content of the Peripheral ID2 Register
(0xFE8). The value is taken directly from the HW.
What: /sys/bus/coresight/devices/etm<N>/mgmt/trcpidr3
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Print the content of the Peripheral ID3 Register
+Description: (Read) Print the content of the Peripheral ID3 Register
(0xFEC). The value is taken directly from the HW.
What: /sys/bus/coresight/devices/etm<N>/mgmt/trcconfig
Date: February 2016
KernelVersion: 4.07
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Print the content of the trace configuration register
+Description: (Read) Print the content of the trace configuration register
(0x010) as currently set by SW.
What: /sys/bus/coresight/devices/etm<N>/mgmt/trctraceid
Date: February 2016
KernelVersion: 4.07
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Print the content of the trace ID register (0x040).
+Description: (Read) Print the content of the trace ID register (0x040).
What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr0
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Returns the tracing capabilities of the trace unit (0x1E0).
+Description: (Read) Returns the tracing capabilities of the trace unit (0x1E0).
The value is taken directly from the HW.
What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr1
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Returns the tracing capabilities of the trace unit (0x1E4).
+Description: (Read) Returns the tracing capabilities of the trace unit (0x1E4).
The value is taken directly from the HW.
What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr2
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Returns the maximum size of the data value, data address,
+Description: (Read) Returns the maximum size of the data value, data address,
VMID, context ID and instuction address in the trace unit
(0x1E8). The value is taken directly from the HW.
@@ -445,7 +445,7 @@ What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr3
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Returns the value associated with various resources
+Description: (Read) Returns the value associated with various resources
available to the trace unit. See the Trace Macrocell
architecture specification for more details (0x1E8).
The value is taken directly from the HW.
@@ -454,42 +454,42 @@ What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr4
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Returns how many resources the trace unit supports (0x1F0).
+Description: (Read) Returns how many resources the trace unit supports (0x1F0).
The value is taken directly from the HW.
What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr5
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Returns how many resources the trace unit supports (0x1F4).
+Description: (Read) Returns how many resources the trace unit supports (0x1F4).
The value is taken directly from the HW.
What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr8
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Returns the maximum speculation depth of the instruction
+Description: (Read) Returns the maximum speculation depth of the instruction
trace stream. (0x180). The value is taken directly from the HW.
What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr9
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Returns the number of P0 right-hand keys that the trace unit
+Description: (Read) Returns the number of P0 right-hand keys that the trace unit
can use (0x184). The value is taken directly from the HW.
What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr10
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Returns the number of P1 right-hand keys that the trace unit
+Description: (Read) Returns the number of P1 right-hand keys that the trace unit
can use (0x188). The value is taken directly from the HW.
What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr11
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Returns the number of special P1 right-hand keys that the
+Description: (Read) Returns the number of special P1 right-hand keys that the
trace unit can use (0x18C). The value is taken directly from
the HW.
@@ -497,7 +497,7 @@ What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr12
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Returns the number of conditional P1 right-hand keys that
+Description: (Read) Returns the number of conditional P1 right-hand keys that
the trace unit can use (0x190). The value is taken directly
from the HW.
@@ -505,6 +505,6 @@ What: /sys/bus/coresight/devices/etm<N>/trcidr/trcidr13
Date: April 2015
KernelVersion: 4.01
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Returns the number of special conditional P1 right-hand keys
+Description: (Read) Returns the number of special conditional P1 right-hand keys
that the trace unit can use (0x194). The value is taken
directly from the HW.
@@ -42,7 +42,7 @@ What: /sys/bus/coresight/devices/<memory_map>.stm/status
Date: April 2016
KernelVersion: 4.7
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) List various control and status registers. The specific
+Description: (Read) List various control and status registers. The specific
layout and content is driver specific.
What: /sys/bus/coresight/devices/<memory_map>.stm/traceid
@@ -11,21 +11,21 @@ What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/rsz
Date: March 2016
KernelVersion: 4.7
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Defines the size, in 32-bit words, of the local RAM buffer.
+Description: (Read) Defines the size, in 32-bit words, of the local RAM buffer.
The value is read directly from HW register RSZ, 0x004.
What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/sts
Date: March 2016
KernelVersion: 4.7
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Shows the value held by the TMC status register. The value
+Description: (Read) Shows the value held by the TMC status register. The value
is read directly from HW register STS, 0x00C.
What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/rrp
Date: March 2016
KernelVersion: 4.7
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Shows the value held by the TMC RAM Read Pointer register
+Description: (Read) Shows the value held by the TMC RAM Read Pointer register
that is used to read entries from the Trace RAM over the APB
interface. The value is read directly from HW register RRP,
0x014.
@@ -34,7 +34,7 @@ What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/rwp
Date: March 2016
KernelVersion: 4.7
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Shows the value held by the TMC RAM Write Pointer register
+Description: (Read) Shows the value held by the TMC RAM Write Pointer register
that is used to sets the write pointer to write entries from
the CoreSight bus into the Trace RAM. The value is read directly
from HW register RWP, 0x018.
@@ -43,21 +43,21 @@ What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/trg
Date: March 2016
KernelVersion: 4.7
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Similar to "trigger_cntr" above except that this value is
+Description: (Read) Similar to "trigger_cntr" above except that this value is
read directly from HW register TRG, 0x01C.
What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/ctl
Date: March 2016
KernelVersion: 4.7
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Shows the value held by the TMC Control register. The value
+Description: (Read) Shows the value held by the TMC Control register. The value
is read directly from HW register CTL, 0x020.
What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/ffsr
Date: March 2016
KernelVersion: 4.7
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Shows the value held by the TMC Formatter and Flush Status
+Description: (Read) Shows the value held by the TMC Formatter and Flush Status
register. The value is read directly from HW register FFSR,
0x300.
@@ -65,7 +65,7 @@ What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/ffcr
Date: March 2016
KernelVersion: 4.7
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Shows the value held by the TMC Formatter and Flush Control
+Description: (Read) Shows the value held by the TMC Formatter and Flush Control
register. The value is read directly from HW register FFCR,
0x304.
@@ -73,7 +73,7 @@ What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/mode
Date: March 2016
KernelVersion: 4.7
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Shows the value held by the TMC Mode register, which
+Description: (Read) Shows the value held by the TMC Mode register, which
indicate the mode the device has been configured to enact. The
The value is read directly from the MODE register, 0x028.
@@ -81,7 +81,7 @@ What: /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/devid
Date: March 2016
KernelVersion: 4.7
Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: (R) Indicates the capabilities of the Coresight TMC.
+Description: (Read) Indicates the capabilities of the Coresight TMC.
The value is read directly from the DEVID register, 0xFC8,
What: /sys/bus/coresight/devices/<memory_map>.tmc/buffer_size
@@ -2,16 +2,16 @@ What: /sys/bus/moxtet/devices/moxtet-<name>.<addr>/module_description
Date: March 2019
KernelVersion: 5.3
Contact: Marek Behún <marek.behun@nic.cz>
-Description: (R) Moxtet module description. Format: string
+Description: (Read) Moxtet module description. Format: string
What: /sys/bus/moxtet/devices/moxtet-<name>.<addr>/module_id
Date: March 2019
KernelVersion: 5.3
Contact: Marek Behún <marek.behun@nic.cz>
-Description: (R) Moxtet module ID. Format: %x
+Description: (Read) Moxtet module ID. Format: %x
What: /sys/bus/moxtet/devices/moxtet-<name>.<addr>/module_name
Date: March 2019
KernelVersion: 5.3
Contact: Marek Behún <marek.behun@nic.cz>
-Description: (R) Moxtet module name. Format: string
+Description: (Read) Moxtet module name. Format: string
@@ -2,21 +2,21 @@ What: /sys/firmware/turris-mox-rwtm/board_version
Date: August 2019
KernelVersion: 5.4
Contact: Marek Behún <marek.behun@nic.cz>
-Description: (R) Board version burned into eFuses of this Turris Mox board.
+Description: (Read) Board version burned into eFuses of this Turris Mox board.
Format: %i
What: /sys/firmware/turris-mox-rwtm/mac_address*
Date: August 2019
KernelVersion: 5.4
Contact: Marek Behún <marek.behun@nic.cz>
-Description: (R) MAC addresses burned into eFuses of this Turris Mox board.
+Description: (Read) MAC addresses burned into eFuses of this Turris Mox board.
Format: %pM
What: /sys/firmware/turris-mox-rwtm/pubkey
Date: August 2019
KernelVersion: 5.4
Contact: Marek Behún <marek.behun@nic.cz>
-Description: (R) ECDSA public key (in pubkey hex compressed form) computed
+Description: (Read) ECDSA public key (in pubkey hex compressed form) computed
as pair to the ECDSA private key burned into eFuses of this
Turris Mox Board.
Format: string
@@ -25,7 +25,7 @@ What: /sys/firmware/turris-mox-rwtm/ram_size
Date: August 2019
KernelVersion: 5.4
Contact: Marek Behún <marek.behun@nic.cz>
-Description: (R) RAM size in MiB of this Turris Mox board as was detected
+Description: (Read) RAM size in MiB of this Turris Mox board as was detected
during manufacturing and burned into eFuses. Can be 512 or 1024.
Format: %i
@@ -33,5 +33,5 @@ What: /sys/firmware/turris-mox-rwtm/serial_number
Date: August 2019
KernelVersion: 5.4
Contact: Marek Behún <marek.behun@nic.cz>
-Description: (R) Serial number burned into eFuses of this Turris Mox device.
+Description: (Read) Serial number burned into eFuses of this Turris Mox device.
Format: %016X
Unfortunately, (R) and (W) are valid markups for enumerated lists, as described at: https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#enumerated-lists So, we ned to replace them by: (R) -> (Read) (W) -> (Write) As otherwise, (R) will be displayed as R., with is not what it is desired. There's no need to touch (RO) and (RW). Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> --- Documentation/ABI/testing/debugfs-moxtet | 2 +- .../ABI/testing/debugfs-turris-mox-rwtm | 15 ++-- .../testing/sysfs-bus-coresight-devices-cti | 60 +++++++-------- .../testing/sysfs-bus-coresight-devices-etb10 | 16 ++-- .../testing/sysfs-bus-coresight-devices-etm3x | 10 +-- .../testing/sysfs-bus-coresight-devices-etm4x | 76 +++++++++---------- .../testing/sysfs-bus-coresight-devices-stm | 2 +- .../testing/sysfs-bus-coresight-devices-tmc | 20 ++--- .../ABI/testing/sysfs-bus-moxtet-devices | 6 +- .../testing/sysfs-firmware-turris-mox-rwtm | 10 +-- 10 files changed, 109 insertions(+), 108 deletions(-)