| Message ID | 742cf44d162523a66bb4ce60e15449dfbf88800a.1531133612.git.amit.kucheria@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Jul 9, 2018 at 4:57 PM, Amit Kucheria <amit.kucheria@linaro.org> wrote: > SDM845 has two tsens blocks, one with 13 sensors and the other with 8 > sensors. It uses version 2 of the TSENS IP, so use the fallback property to > allow more common code. > > Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> > --- > arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index cdaabeb..d97ee00 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -221,6 +221,22 @@ > #interrupt-cells = <2>; > }; > > + tsens0: tsens@c222000 { Oops, sending out v6 to fix this. > + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; > + reg = <0xc263000 0x1ff>, /* TM */ > + <0xc222000 0x1ff>; /* SROT */ > + #qcom,sensors = <13>; > + #thermal-sensor-cells = <1>; > + }; > + > + tsens1: tsens@c223000 { > + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; > + reg = <0xc265000 0x1ff>, /* TM */ > + <0xc223000 0x1ff>; /* SROT */ > + #qcom,sensors = <8>; > + #thermal-sensor-cells = <1>; > + }; > + > spmi_bus: spmi@c440000 { > compatible = "qcom,spmi-pmic-arb"; > reg = <0xc440000 0x1100>, > -- > 2.7.4 >
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index cdaabeb..d97ee00 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -221,6 +221,22 @@ #interrupt-cells = <2>; }; + tsens0: tsens@c222000 { + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; + reg = <0xc263000 0x1ff>, /* TM */ + <0xc222000 0x1ff>; /* SROT */ + #qcom,sensors = <13>; + #thermal-sensor-cells = <1>; + }; + + tsens1: tsens@c223000 { + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; + reg = <0xc265000 0x1ff>, /* TM */ + <0xc223000 0x1ff>; /* SROT */ + #qcom,sensors = <8>; + #thermal-sensor-cells = <1>; + }; + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0xc440000 0x1100>,
SDM845 has two tsens blocks, one with 13 sensors and the other with 8 sensors. It uses version 2 of the TSENS IP, so use the fallback property to allow more common code. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)