diff mbox series

[3/7] ARM: dts: suniv: Add dt-binding headers for F1C100s

Message ID 7ad73fd5c2664a50722cf0771512433483a629ca.1549875778.git.mesihkilinc@gmail.com (mailing list archive)
State New, archived
Headers show
Series Timer & SPI support for Allwinner suniv F1C100s | expand

Commit Message

Mesih Kilinc Feb. 11, 2019, 9:21 a.m. UTC 
dt-binding headers for F1C100s merged now. So add them back to dtsi.

Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
---
 arch/arm/boot/dts/suniv-f1c100s.dtsi | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi
index 6100d3b..953228c 100644
--- a/arch/arm/boot/dts/suniv-f1c100s.dtsi
+++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi
@@ -4,6 +4,9 @@ 
  * Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com>
  */
 
+#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -82,7 +85,7 @@ 
 			compatible = "allwinner,suniv-f1c100s-pinctrl";
 			reg = <0x01c20800 0x400>;
 			interrupts = <38>, <39>, <40>;
-			clocks = <&ccu 37>, <&osc24M>, <&osc32k>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
@@ -114,8 +117,8 @@ 
 			interrupts = <1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 38>;
-			resets = <&ccu 24>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
 			status = "disabled";
 		};
 
@@ -125,8 +128,8 @@ 
 			interrupts = <2>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 39>;
-			resets = <&ccu 25>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
 			status = "disabled";
 		};
 
@@ -136,8 +139,8 @@ 
 			interrupts = <3>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 40>;
-			resets = <&ccu 26>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
 			status = "disabled";
 		};
 	};