[GIT,PULL,2/2] arm64: dts: ti: K3 updates for v6.5

Hi ARM SoC maintainers, The following changes since commit ac9a78681b921877518763ba0e89202254349d1b: Linux 6.4-rc1 (2023-05-07 13:34:35 -0700) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git tags/ti-k3-dt-for-v6.5 for you to fetch changes up to a49568115143435390f20965902809471b6f830c: arm64: dts: ti: Unify pin group node names for make dtbs checks (2023-06-15 20:58:38 +0530) ---------------------------------------------------------------- TI K3 device tree updates for v6.5 New Boards: phyBOARD-Lyra-AM625 Board support Toradex Verdin AM62 COM, carrier and dev boards New features: Across K3 SoCs: - Error Signaling Module(ESM) and Secproxy IPC modules - On board I2C EEPROM - Voltage Temp Monitoring (VTM) module - DM timers (GP Timers) J784s4: - R5 and C7x DSP remoteproc, ADC, QSPI AM69: - Addition of more peripherals: CPSW, eMMC, UARTs, I2C et al J721s2: - USB, Serdes, OSPI, PCIe AM62a: - Watchdog J721e: - HyperFlash/HyperBus AM62: - Type-C USB0 port Cleanups and non-urgent fixes Particularly large set of cleanups to get rid of dtbs_check errors and dtc warnings: - Addition of missing pinmux and uart nodes for AM64, AM62x, AM62A, J721e, J7200 that are used by bootloader - Split Pinmux regions/range to avoid holes for J721s2, J7200, J784s4 - Drop bootargs and unneeded aliases across all K3 SoCs - Move aliases to board dts files from SoC dtsi files - Move to generic node name for can, rtc nodes on am65 - s/-pins-default/default-pins/ to match upcoming pinctrl.yaml update - Fix pinctrl phandle references to use <> as separator where multiple entries are present ---------------------------------------------------------------- Andrew Davis (7): arm64: dts: ti: k3-j721e-beagleboneai64: Fix mailbox node status arm64: dts: ti: k3-j721e: Remove PCIe endpoint nodes arm64: dts: ti: k3-j721e: Enable PCIe nodes at the board level arm64: dts: ti: k3-am64: Enable Mailbox nodes at the board level arm64: dts: ti: k3-j721e: Enable MDIO nodes at the board level arm64: dts: ti: k3-am64: Only set UART baud for used ports arm64: dts: ti: k3-am64: Use phandle to stdout UART node Apurva Nandan (2): arm64: dts: ti: k3-j784s4-mcu-wakeup: Add FSS OSPI0 and FSS OSPI1 arm64: dts: ti: k3-j784s4-evm: Add support for OSPI and QSPI flashes Aswath Govindraju (7): arm64: dts: ti: k3-j721s2-main: Add support for USB arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0 arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe Bhavya Kapoor (4): arm64: dts: ti: k3-j721e-main: Update delay select values for MMC subsystems arm64: dts: ti: k3-j784s4-mcu-wakeup: Add support for ADC nodes arm64: dts: ti: k3-j784s4-evm: Add pinmux information for ADC arm64: dts: ti: k3-j784s4-main: Enable support for high speed modes Bryan Brattlof (3): arm64: dts: ti: k3-am64-main: add VTM node arm64: dts: ti: k3-am62-wakeup: add VTM node arm64: dts: ti: k3-am62a-wakeup: add VTM node Dasnavis Sabiya (2): arm64: dts: ti: k3-am69-sk: Add eMMC mmc0 support arm64: dts: ti: k3-am69-sk: Add pinmux for RPi Header Francesco Dolcini (4): dt-bindings: arm: ti: add toradex,verdin-am62 et al. arm64: dts: ti: add verdin am62 arm64: dts: ti: add verdin am62 dahlia arm64: dts: ti: add verdin am62 yavia Hari Nagalla (3): arm64: dts: ti: k3-j784s4-main: Add R5F cluster nodes arm64: dts: ti: k3-j784s4-main: Add C71x DSP nodes arm64: dts: ti: k3-j784s4-evm: Reserve memory for remote proc IPC Jyri Sarha (1): arm64: dts: ti: am65x: Add Rocktech OLDI panel DT overlay Keerthy (5): arm64: dts: ti: k3-j7200: Fix physical address of pin arm64: dts: ti: j784s4: Add VTM node arm64: dts: ti: j721e: Add VTM node arm64: dts: ti: j7200: Add VTM node arm64: dts: ti: j721s2: Add VTM node Krzysztof Kozlowski (1): arm64: dts: ti: add missing cache properties Matt Ranostay (1): arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node Neha Malcom Francis (4): arm64: dts: ti: k3-j721s2: Change CPTS clock parent dt-bindings: misc: esm: Add ESM support for TI K3 devices arm64: dts: ti: k3-j721e: Add ESM support arm64: dts: ti: k3-j7200: Add ESM support Nishanth Menon (84): arm64: dts: ti: k3-am64: Add general purpose timers arm64: dts: ti: k3-am642-sk: Fix mmc1 pinmux arm64: dts: ti: k3-am642-sk: Enable main_i2c0 and eeprom arm64: dts: ti: k3-am642-sk: Describe main_uart1 pins arm64: dts: ti: k3-am642-sk: Rename regulator node name arm64: dts: ti: k3-am642-evm: Enable main_i2c0 and eeprom arm64: dts: ti: k3-am642-evm: Describe main_uart1 pins arm64: dts: ti: k3-am642-evm: Rename regulator node name arm64: dts: ti: k3-am642-evm: Add VTT GPIO regulator for DDR arm64: dts: ti: k3-am642-sk|evm: Drop bootargs, add aliases arm64: dts: ti: k3-am62x-sk-common: Drop bootargs arm64: dts: ti: k3-am65*: Drop bootargs arm64: dts: ti: k3-j721e-*: Drop bootargs arm64: dts: ti: k3-j7200-common-proc-board: Drop bootargs arm64: dts: ti: k3-j721s2-common-proc-board: Drop bootargs arm64: dts: ti: k3-am62a: Add general purpose timers arm64: dts: ti: k3-am62a: Add watchdog nodes arm64: dts: ti: k3-am654-base-board: Add missing pinmux wkup_uart, mcu_uart and mcu_i2c arm64: dts: ti: k3-am654-base-board: Rename regulator node name arm64: dts: ti: k3-am654-base-board: Add VTT GPIO regulator for DDR arm64: dts: ti: k3-am654-base-board: Add missing PMIC arm64: dts: ti: k3-am654-base-board: Add board detect eeprom arm64: dts: ti: k3-am654-base-board: Add aliases arm64: dts: ti: k3-am65: Drop aliases arm64: dts: ti: k3-am65-main: Remove "syscon" nodes added for pcieX_ctrl arm64: dts: ti: k3-am62a7-sk: Describe main_uart1 and wkup_uart arm64: dts: ti: k3: j721s2/j784s4: Switch to https links arm64: dts: ti: k3-am62x-sk-common: Drop extra EoL arm64: dts: ti: k3-am62x-sk-common: Describe main_uart1 and wkup_uart arm64: dts: ti: k3-am62x-sk-common: Add eeprom arm64: dts: ti: k3-am62x-sk-common: Improve documentation of mcasp1_pins arm64: dts: ti: k3-am65-main: Fix mcan node name arm64: dts: ti: k3-am65-main: Drop deprecated ti,otap-del-sel property arm64: dts: ti: k3-am65-iot2050-common: Rename rtc8564 nodename arm64: dts: ti: k3-am62a-main: Add sa3_secproxy arm64: dts: ti: k3-am65-mcu: Add mcu_secproxy arm64: dts: ti: k3-j7200-mcu: Add mcu_secproxy arm64: dts: ti: k3-j721e-mcu: Add mcu_secproxy arm64: dts: ti: k3-j721s2-mcu-wakeup: Add sa3_secproxy and mcu_sec_proxy arm64: dts: ti: k3-j784s4-mcu-wakeup: Add sa3_secproxy and mcu_sec_proxy arm64: dts: ti: k3-j721e: Add general purpose timers arm64: dts: ti: k3-j721e: Configure pinctrl for timer IO arm64: dts: ti: k3-j721s2: Add general purpose timers arm64: dts: ti: k3-j721s2: Configure pinctrl for timer IO arm64: dts: ti: k3-j784s4: Add general purpose timers arm64: dts: ti: k3-j784s4: Configure pinctrl for timer IO arm64: dts: ti: k3-j721e-sk: Fixup reference to phandles array arm64: dts: ti: k3-j721e-som-p0/common-proc-board: Fixup reference to phandles array arm64: dts: ti: k3-j721e-beagleboneai64: Move camera gpio pinctrl to gpio node arm64: dts: ti: k3-j721e-beagleboneai64: Move eeprom WP gpio pinctrl to eeprom node arm64: dts: ti: k3-j721e-beagleboneai64: Fixup reference to phandles array arm64: dts: ti: k3-am642-phyboard-electra-rdk: Fixup reference to phandles array arm64: dts: ti: k3-j7200-som/common-proc-board: Fixup reference to phandles array arm64: dts: ti: k3-j721s2-common-proc-board: Fixup reference to phandles array arm64: dts: ti: k3-am625-sk: Fixup reference to phandles array arm64: dts: ti: k3-am64-evm: Fixup reference to phandles array arm64: dts: ti: k3-am64-sk: Fixup reference to phandles array arm64: dts: ti: k3-am65-iot*: Fixup reference to phandles array arm64: dts: ti: k3-am654-base-board: Fixup reference to phandles array arm64: dts: ti: k3-am68-sk-base-board: Fixup reference to phandles array arm64: dts: ti: k3-j784s4-evm: Fix main_i2c0 alias arm64: dts: ti: k3-j784s4-evm: Add mcu and wakeup uarts arm64: dts: ti: k3-j784s4-evm: Enable wakeup_i2c0 and eeprom arm64: dts: ti: k3-am69-sk: Fix main_i2c0 alias arm64: dts: ti: k3-am69-sk: Enable mcu network port arm64: dts: ti: k3-am69-sk: Add mcu and wakeup uarts arm64: dts: ti: k3-am69-sk: Enable wakeup_i2c0 and eeprom arm64: dts: ti: k3-j721e-sk: Add missing uart pinmuxes arm64: dts: ti: k3-j721e-sk: Enable wakeup_i2c0 and eeprom arm64: dts: ti: j721e-som/common-proc-board: Add product links arm64: dts: ti: j721e-common-proc-board: Add uart pinmux arm64: dts: ti: k3-j721e-som-p0: Enable wakeup_i2c0 and eeprom arm64: dts: ti: k3-j721e-beagleboneai64: Add wakeup_uart pinmux arm64: dts: ti: k3-j721e-sk: Define aliases at board level arm64: dts: ti: k3-j721e-common-proc-board: Define aliases at board level arm64: dts: ti: k3-j721e: Drop SoC level aliases arm64: dts: ti: k3-am68-sk-base-board: Add uart pinmux arm64: dts: ti: k3-am68-sk-som: Enable wakeup_i2c0 and eeprom arm64: dts: ti: k3-j721s2-common-proc-board: Add uart pinmux arm64: dts: ti: k3-j721s2-som-p0: Enable wakeup_i2c0 and eeprom arm64: dts: ti: k3-am62: Add ESM support arm64: dts: ti: k3-am64: Add ESM support arm64: dts: ti: k3-j721e-som-p0: Enable wakeup_i2c0 and eeprom arm64: dts: ti: k3-j7200-mcu-wakeup: Remove 0x unit address prefix from nodename Nitin Yadav (1): arm64: dts: ti: k3-am62-main: Add sa3_secproxy Roger Quadros (1): arm64: dts: ti: k3-am625: Enable Type-C port for USB0 Sinthu Raja (2): arm64: dts: ti: k3-j721s2: Fix wkup pinmux range arm64: dts: ti: k3-am68-sk-base-board: Add pinmux for RPi Header Thejasvi Konduru (1): arm64: dts: ti: k3-j784s4: Fix wakeup pinmux range and pinctrl node offsets Tony Lindgren (1): arm64: dts: ti: Unify pin group node names for make dtbs checks Udit Kumar (7): arm64: dts: ti: k3-j7200-som: Enable I2C arm64: dts: ti: k3-j7200: Add general purpose timers arm64: dts: ti: k3-j7200: Configure pinctrl for timer IO pads arm64: dts: ti: k3-j7200-common-proc-board: remove duplicate main_i2c0 pin mux arm64: dts: ti: k3-j7200-common-proc-board: Add uart pinmux arm64: dts: ti: k3-j7200-common-proc-board: Define aliases at board level arm64: dts: ti: k3-j7200: Drop SoC level aliases Vaishnav Achath (9): arm64: dts: ti: k3-j721e-mcu-wakeup: Add HyperBus node arm64: dts: ti: k3-j721e-som-p0: Add HyperFlash node arm64: dts: ti: k3-j7200-common-proc-board: Add OSPI/Hyperflash select pinmux arm64: dts: ti: k3-j721e-common-proc-board: Add OSPI/Hyperflash select pinmux arm64: dts: ti: k3-j721e: Describe OSPI and QSPI flash partition info arm64: dts: ti: k3-j721e-sk: Describe OSPI flash partition info arm64: dts: ti: k3-j7200-som: Describe OSPI and Hyperflash partition info arm64: dts: ti: k3-am654-baseboard: Describe OSPI flash partition info arm64: dts: ti: k3-am642-sk/evm: Describe OSPI flash partition info Wadim Egorov (3): arm64: dts: ti: Add LED controller to phyBOARD-Electra dt-bindings: arm: ti: Add bindings for PHYTEC AM62x based hardware arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM625 Documentation/devicetree/bindings/arm/ti/k3.yaml | 26 + Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml | 53 + arch/arm64/boot/dts/ti/Makefile | 9 + arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts | 6 +- arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 21 + arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi | 6 + arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi | 324 +++ arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi | 33 + arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi | 161 ++ arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi | 190 ++ arch/arm64/boot/dts/ti/k3-am62-verdin-nonwifi.dtsi | 20 + arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi | 39 + arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi | 207 ++ arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi | 1401 ++++++++++ arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi | 8 + arch/arm64/boot/dts/ti/k3-am62.dtsi | 8 +- arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 52 +- arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts | 266 ++ arch/arm64/boot/dts/ti/k3-am625-sk.dts | 13 +- arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dahlia.dts | 22 + arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dev.dts | 22 + arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-yavia.dts | 22 + arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dahlia.dts | 22 + arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dev.dts | 22 + arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-yavia.dts | 22 + arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 156 ++ arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi | 56 + arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi | 47 + arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi | 19 + arch/arm64/boot/dts/ti/k3-am62a.dtsi | 2 + arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 58 +- arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 97 +- arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 171 +- arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi | 53 +- arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi | 36 +- arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi | 33 + arch/arm64/boot/dts/ti/k3-am64.dtsi | 19 +- arch/arm64/boot/dts/ti/k3-am642-evm.dts | 173 +- arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts | 51 +- arch/arm64/boot/dts/ti/k3-am642-sk.dts | 166 +- arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 68 +- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 28 +- arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 19 +- arch/arm64/boot/dts/ti/k3-am65.dtsi | 17 - arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi | 2 +- .../dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso | 71 + arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 172 +- arch/arm64/boot/dts/ti/k3-am654.dtsi | 1 + .../arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts | 24 +- arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts | 171 +- arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi | 22 + arch/arm64/boot/dts/ti/k3-am69-sk.dts | 182 +- arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 121 +- arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso | 2 +- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 264 ++ arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 179 +- arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 107 +- arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi | 47 + arch/arm64/boot/dts/ti/k3-j7200.dtsi | 21 +- arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts | 157 +- arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 226 +- arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso | 2 +- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 362 ++- arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 206 ++ arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 210 +- arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 167 +- arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi | 75 + arch/arm64/boot/dts/ti/k3-j721e.dtsi | 23 +- arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts | 213 +- arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 405 +++ arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 275 +- arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 67 +- arch/arm64/boot/dts/ti/k3-j721s2-thermal.dtsi | 101 + arch/arm64/boot/dts/ti/k3-j721s2.dtsi | 7 +- arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 616 +++- arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 427 ++- arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 350 ++- arch/arm64/boot/dts/ti/k3-j784s4-thermal.dtsi | 101 + arch/arm64/boot/dts/ti/k3-j784s4.dtsi | 6 +- 80 files changed, 8767 insertions(+), 861 deletions(-) create mode 100644 Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml create mode 100644 arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am62-verdin-nonwifi.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dahlia.dts create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dev.dts create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-yavia.dts create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dahlia.dts create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dev.dts create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-yavia.dts create mode 100644 arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-thermal.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-thermal.dtsi

Message ID	7fe0c6de-cb99-9c89-8583-b3855fde16f8@ti.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org> Message-ID: <7fe0c6de-cb99-9c89-8583-b3855fde16f8@ti.com> Date: Thu, 15 Jun 2023 21:50:20 +0530 MIME-Version: 1.0 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101 Thunderbird/102.11.0 Content-Language: en-US To: Olof Johansson <olof@lixom.net>, Arnd Bergmann <arnd@arndb.de>, arm-soc <arm@kernel.org>, SoC <soc@kernel.org> CC: Tero Kristo <kristo@kernel.org>, Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>, "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org>, "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org> From: Vignesh Raghavendra <vigneshr@ti.com> Subject: [GIT PULL 2/2] arm64: dts: ti: K3 updates for v6.5 Precedence: list Content-Type: multipart/mixed; boundary="===============7381544936942713920==" Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org
Series	[GIT,PULL,1/2] arm64: defconfig: TI K3 updates for v6.5 \| expand [GIT,PULL,1/2] arm64: defconfig: TI K3 updates for v6.5 [GIT,PULL,2/2] arm64: dts: ti: K3 updates for v6.5

[GIT,PULL,2/2] arm64: dts: ti: K3 updates for v6.5

Pull-request

Message