@@ -132,6 +132,12 @@ ina226-u75 {
compatible = "iio-hwmon";
io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
};
+
+ refhdmi: refhdmi {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <114285000>;
+ };
};
&can1 {
@@ -526,6 +532,17 @@ si5328: clock-generator@69 {/* SI5328 - u20 */
* interrupt-parent = <&>;
* interrupts = <>;
*/
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+ clocks = <&refhdmi>;
+ clock-names = "xtal";
+ clock-output-names = "si5328";
+
+ si5328_clk: clk0@0 {
+ reg = <0>;
+ clock-frequency = <27000000>;
+ };
};
};
/* 5 - 7 unconnected */
@@ -132,6 +132,12 @@ ina226-u75 {
compatible = "iio-hwmon";
io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
};
+
+ refhdmi: refhdmi {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <114285000>;
+ };
};
&can1 {
@@ -520,6 +526,22 @@ i2c@4 {
reg = <4>;
si5328: clock-generator@69 {/* SI5328 - u20 */
reg = <0x69>;
+ /*
+ * Chip has interrupt present connected to PL
+ * interrupt-parent = <&>;
+ * interrupts = <>;
+ */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+ clocks = <&refhdmi>;
+ clock-names = "xtal";
+ clock-output-names = "si5328";
+
+ si5328_clk: clk0@0 {
+ reg = <0>;
+ clock-frequency = <27000000>;
+ };
};
};
i2c@5 {
Origin DT binding just specify driver but wasn't aligned with DT binding which came later. Extend description for zcu102 and zcu106 to cover latest binding. Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- Changes in v2: None .../boot/dts/xilinx/zynqmp-zcu102-revA.dts | 17 ++++++++++++++ .../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 22 +++++++++++++++++++ 2 files changed, 39 insertions(+)