| Message ID | 87h85two0r.fsf@FE-laptop (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [GIT,PULL] ARM: mvebu: dt64 for v5.4 (#2) | expand |
On Tue, Sep 3, 2019 at 2:41 PM Gregory CLEMENT <gregory.clement@bootlin.com> wrote: > Here is the second pull request for dt64 for mvebu for v5.4. > > For the Turris Mox board there was dependencies with moxtet header which > was already merged in your arm/drivers branch. That the reason why I > merged this branch in my mvebu/dt64 branch. > > Let me know if it is a problem and if you want that I do it in a > different way. I don't really like this, but it's too late to do it right now. The problem is that I should have not picked up the patches from the list in the first place if there are these dependencies. This could have been communicated better in the patch series, but it really my own fault. > ---------------------------------------------------------------- > mvebu dt64 for 5.4 (part 2) > > Add support for Turris Mox board (Armada 3720 SoC based) > > ---------------------------------------------------------------- > Marek Behún (3): > arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl > dt-bindings: marvell: document Turris Mox compatible > arm64: dts: marvell: add DTS for Turris Mox I think the best way forward would be for me to apply the remaining patches on top of the arm/drivers branch, to avoid also pulling in your other DT changes into arm/drivers, or pulling in all of arm/drivers into arm/dt. Would that work for you? Arnd
On Tue, 3 Sep 2019 23:05:47 +0200 Arnd Bergmann <arnd@arndb.de> wrote: > On Tue, Sep 3, 2019 at 2:41 PM Gregory CLEMENT > <gregory.clement@bootlin.com> wrote: > > Here is the second pull request for dt64 for mvebu for v5.4. > > > > For the Turris Mox board there was dependencies with moxtet header which > > was already merged in your arm/drivers branch. That the reason why I > > merged this branch in my mvebu/dt64 branch. > > > > Let me know if it is a problem and if you want that I do it in a > > different way. > > I don't really like this, but it's too late to do it right now. The problem is > that I should have not picked up the patches from the list in the first > place if there are these dependencies. > > This could have been communicated better in the patch series, but > it really my own fault. > > > ---------------------------------------------------------------- > > mvebu dt64 for 5.4 (part 2) > > > > Add support for Turris Mox board (Armada 3720 SoC based) > > > > ---------------------------------------------------------------- > > Marek Behún (3): > > arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl > > dt-bindings: marvell: document Turris Mox compatible > > arm64: dts: marvell: add DTS for Turris Mox > > I think the best way forward would be for me to apply the > remaining patches on top of the arm/drivers branch, to avoid > also pulling in your other DT changes into arm/drivers, or pulling > in all of arm/drivers into arm/dt. > > Would that work for you? > > Arnd Hi Arnd, I also sent you a series for fixing some gcc warnings for the moxtet driver, with subject [PATCH armsoc/drivers 0/2] Turris Mox moxtet warnings fixes and a new driver for Turris Mox secure firmware: [PATCH arm/drivers 0/3] Turris Mox rWTM firmware support I probably should have been sending these with mvebu tag to be applied by Gregory from the beginning. I am sorry. Will you apply these or should I send them again, this time to Gregory? Thank you. Marek
On Tue, Sep 3, 2019 at 11:05 PM Arnd Bergmann <arnd@arndb.de> wrote: > > On Tue, Sep 3, 2019 at 2:41 PM Gregory CLEMENT > <gregory.clement@bootlin.com> wrote: > > Here is the second pull request for dt64 for mvebu for v5.4. > > > > For the Turris Mox board there was dependencies with moxtet header which > > was already merged in your arm/drivers branch. That the reason why I > > merged this branch in my mvebu/dt64 branch. > > > > Let me know if it is a problem and if you want that I do it in a > > different way. > > I don't really like this, but it's too late to do it right now. The problem is > that I should have not picked up the patches from the list in the first > place if there are these dependencies. > > This could have been communicated better in the patch series, but > it really my own fault. > > > ---------------------------------------------------------------- > > mvebu dt64 for 5.4 (part 2) > > > > Add support for Turris Mox board (Armada 3720 SoC based) > > > > ---------------------------------------------------------------- > > Marek Behún (3): > > arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl > > dt-bindings: marvell: document Turris Mox compatible > > arm64: dts: marvell: add DTS for Turris Mox > > I think the best way forward would be for me to apply the > remaining patches on top of the arm/drivers branch, to avoid > also pulling in your other DT changes into arm/drivers, or pulling > in all of arm/drivers into arm/dt. > > Would that work for you? I ended up creating an arm/late branch for other reasons, put this branch in there as well. Arnd
Hi Arnd, > On Tue, Sep 3, 2019 at 11:05 PM Arnd Bergmann <arnd@arndb.de> wrote: >> >> On Tue, Sep 3, 2019 at 2:41 PM Gregory CLEMENT >> <gregory.clement@bootlin.com> wrote: >> > Here is the second pull request for dt64 for mvebu for v5.4. >> > >> > For the Turris Mox board there was dependencies with moxtet header which >> > was already merged in your arm/drivers branch. That the reason why I >> > merged this branch in my mvebu/dt64 branch. >> > >> > Let me know if it is a problem and if you want that I do it in a >> > different way. >> >> I don't really like this, but it's too late to do it right now. The problem is >> that I should have not picked up the patches from the list in the first >> place if there are these dependencies. >> >> This could have been communicated better in the patch series, but >> it really my own fault. >> >> > ---------------------------------------------------------------- >> > mvebu dt64 for 5.4 (part 2) >> > >> > Add support for Turris Mox board (Armada 3720 SoC based) >> > >> > ---------------------------------------------------------------- >> > Marek Behún (3): >> > arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl >> > dt-bindings: marvell: document Turris Mox compatible >> > arm64: dts: marvell: add DTS for Turris Mox >> >> I think the best way forward would be for me to apply the >> remaining patches on top of the arm/drivers branch, to avoid >> also pulling in your other DT changes into arm/drivers, or pulling >> in all of arm/drivers into arm/dt. >> >> Would that work for you? > > I ended up creating an arm/late branch for other reasons, put > this branch in there as well. OK thanks! Gregory > > Arnd
Hi, Here is the second pull request for dt64 for mvebu for v5.4. For the Turris Mox board there was dependencies with moxtet header which was already merged in your arm/drivers branch. That the reason why I merged this branch in my mvebu/dt64 branch. Let me know if it is a problem and if you want that I do it in a different way. Gregory The following changes since commit 4e48ff438fca98a70d8e813d18e336f25da73ed8: Merge remote-tracking branch 'arm-soc/arm/drivers' into HEAD (2019-08-31 09:24:13 +0200) are available in the Git repository at: git://git.infradead.org/linux-mvebu.git tags/mvebu-dt64-5.4-2 for you to fetch changes up to 7109d817db2e020379d0f245300b8ffe651c5c04: arm64: dts: marvell: add DTS for Turris Mox (2019-08-31 09:24:31 +0200) ---------------------------------------------------------------- mvebu dt64 for 5.4 (part 2) Add support for Turris Mox board (Armada 3720 SoC based) ---------------------------------------------------------------- Marek Behún (3): arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl dt-bindings: marvell: document Turris Mox compatible arm64: dts: marvell: add DTS for Turris Mox .../bindings/arm/marvell/armada-37xx.txt | 8 + arch/arm64/boot/dts/marvell/Makefile | 1 + .../boot/dts/marvell/armada-3720-turris-mox.dts | 840 +++++++++++++++++++++ arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 5 + 4 files changed, 854 insertions(+) create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts