[v17,8/8] arm64: dts: imx8mq: tqma8mq-mba8mx: Enable HDMI support

Commit Message

Sandor Yu Sept. 24, 2024, 7:36 a.m. UTC

From: Alexander Stein <[e-mail]>

Add HDMI connector and connect it to MHDP output. Enable peripherals
for HDMI output.

Signed-off-by: Alexander Stein <[e-mail]>
---
 .../dts/freescale/imx8mq-tqma8mq-mba8mx.dts   | 20 +++++++++++++++++++
 arch/arm64/boot/dts/freescale/mba8mx.dtsi     | 11 ++++++++++
 2 files changed, 31 insertions(+)

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
index 0165f3a259853..406c8229097cb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
@@ -53,6 +53,10 @@  &btn2 {
 	gpios = <&gpio3 17 GPIO_ACTIVE_LOW>;
 };
 
+&dcss {
+	status = "okay";
+};
+
 &gpio_leds {
 	led3 {
 		label = "led3";
@@ -60,6 +64,14 @@  led3 {
 	};
 };
 
+&hdmi_connector {
+	port {
+		hdmi_connector_in: endpoint {
+			remote-endpoint = <&mhdp_out>;
+		};
+	};
+};
+
 &i2c1 {
 	expander2: gpio@25 {
 		compatible = "nxp,pca9555";
@@ -91,6 +103,14 @@  &led2 {
 	gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
 };
 
+&mhdp {
+	status = "okay";
+};
+
+&mhdp_out {
+	remote-endpoint = <&hdmi_connector_in>;
+};
+
 /* PCIe slot on X36 */
 &pcie0 {
 	reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
index c60c7a9e54aff..fedc284ebb506 100644
--- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -89,6 +89,17 @@  gpio_delays: gpio-delays {
 		gpio-line-names = "LVDS_BRIDGE_EN_1V8";
 	};
 
+	hdmi_connector: connector {
+		compatible = "hdmi-connector";
+		label = "X11";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+			};
+		};
+	};
+
 	panel: panel-lvds {
 		/*
 		 * Display is not fixed, so compatible has to be added from