| Message ID | 8a744cfd96aff5754bfdcf7298d208ddca5b319a.1638862030.git.baruch@tkos.co.il (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: qcom: ipq6018: Fix gpio-ranges property | expand |
On 07/12/2021 07:27, Baruch Siach wrote: > There must be three parameters in gpio-ranges property. Fixes this not > very helpful error message: > > OF: /soc/pinctrl@1000000: (null) = 3 found 3 > > Fixes: 1e8277854b49 ("arm64: dts: Add ipq6018 SoC and CP01 board support") > Cc: Sricharan R <sricharan@codeaurora.org> > Signed-off-by: Baruch Siach <baruch@tkos.co.il> > --- > > The error message was improved in commit af3be70a321 ("of: Improve > of_phandle_iterator_next() error message"), but there is evidently some > more room for improvement. As I don't really understand the code, I > added the commit author and the DT list to Cc. > --- > arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi > index 6a22bb5f42f4..a717fc17523d 100644 > --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi > +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi > @@ -220,7 +220,7 @@ tlmm: pinctrl@1000000 { > interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; > gpio-controller; > #gpio-cells = <2>; > - gpio-ranges = <&tlmm 0 80>; > + gpio-ranges = <&tlmm 0 0 80>; > interrupt-controller; > #interrupt-cells = <2>; > > Works for me Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
On 07/12/2021 07:27, Baruch Siach wrote: > There must be three parameters in gpio-ranges property. Fixes this not > very helpful error message: > > OF: /soc/pinctrl@1000000: (null) = 3 found 3 > > Fixes: 1e8277854b49 ("arm64: dts: Add ipq6018 SoC and CP01 board support") > Cc: Sricharan R <sricharan@codeaurora.org> > Signed-off-by: Baruch Siach <baruch@tkos.co.il> > --- > > The error message was improved in commit af3be70a321 ("of: Improve > of_phandle_iterator_next() error message"), but there is evidently some > more room for improvement. As I don't really understand the code, I > added the commit author and the DT list to Cc. > --- > arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi > index 6a22bb5f42f4..a717fc17523d 100644 > --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi > +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi > @@ -220,7 +220,7 @@ tlmm: pinctrl@1000000 { > interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; > gpio-controller; > #gpio-cells = <2>; > - gpio-ranges = <&tlmm 0 80>; > + gpio-ranges = <&tlmm 0 0 80>; > interrupt-controller; > #interrupt-cells = <2>; > > Works for me Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
On Tue, 7 Dec 2021 09:27:10 +0200, Baruch Siach wrote: > There must be three parameters in gpio-ranges property. Fixes this not > very helpful error message: > > OF: /soc/pinctrl@1000000: (null) = 3 found 3 > > Applied, thanks! [1/1] arm64: dts: qcom: ipq6018: Fix gpio-ranges property commit: 72cb4c48a46a7cfa58eb5842c0d3672ddd5bd9ad Best regards,
On 12/6/21 11:27 PM, Baruch Siach wrote: > There must be three parameters in gpio-ranges property. Fixes this not > very helpful error message: > > OF: /soc/pinctrl@1000000: (null) = 3 found 3 > > Fixes: 1e8277854b49 ("arm64: dts: Add ipq6018 SoC and CP01 board support") > Cc: Sricharan R <sricharan@codeaurora.org> > Signed-off-by: Baruch Siach <baruch@tkos.co.il> > --- > > The error message was improved in commit af3be70a321 ("of: Improve > of_phandle_iterator_next() error message"), but there is evidently some > more room for improvement. As I don't really understand the code, I > added the commit author and the DT list to Cc. In the commit message you find what the error message was and then became which tells you which property was used to determine the cell size, and what count was obtained instead. In your particular case here however, since the proper was with the 'gpio-ranges' property and there is no property that indicates the cell size AFAICT, it might been more helpful to revert back to the old message maybe? So maybe something like which is hopefully the best of both worlds: diff --git a/drivers/of/base.c b/drivers/of/base.c index 372a177f3b80..63bff37bf035 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -1378,9 +1378,13 @@ int of_phandle_iterator_next(struct of_phandle_iterator *it) * property data length */ if (it->cur + count > it->list_end) { - pr_err("%pOF: %s = %d found %d\n", - it->parent, it->cells_name, - count, it->cell_count); + if (it->cells_name) + pr_err("%pOF: %s = %d found %d\n", + it->parent, it->cells_name, + count, it->cell_count); + else + pr_err("%pOF: arguments longer than property\n", + it->parent); goto err; } } > --- > arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi > index 6a22bb5f42f4..a717fc17523d 100644 > --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi > +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi > @@ -220,7 +220,7 @@ tlmm: pinctrl@1000000 { > interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; > gpio-controller; > #gpio-cells = <2>; > - gpio-ranges = <&tlmm 0 80>; > + gpio-ranges = <&tlmm 0 0 80>; > interrupt-controller; > #interrupt-cells = <2>; > >
Hi Florian, On Wed, Dec 15 2021, Florian Fainelli wrote: > On 12/6/21 11:27 PM, Baruch Siach wrote: >> There must be three parameters in gpio-ranges property. Fixes this not >> very helpful error message: >> >> OF: /soc/pinctrl@1000000: (null) = 3 found 3 >> >> Fixes: 1e8277854b49 ("arm64: dts: Add ipq6018 SoC and CP01 board support") >> Cc: Sricharan R <sricharan@codeaurora.org> >> Signed-off-by: Baruch Siach <baruch@tkos.co.il> >> --- >> >> The error message was improved in commit af3be70a321 ("of: Improve >> of_phandle_iterator_next() error message"), but there is evidently some >> more room for improvement. As I don't really understand the code, I >> added the commit author and the DT list to Cc. > > In the commit message you find what the error message was and then > became which tells you which property was used to determine the cell > size, and what count was obtained instead. > > In your particular case here however, since the proper was with the > 'gpio-ranges' property and there is no property that indicates the cell > size AFAICT, it might been more helpful to revert back to the old > message maybe? Thanks for taking a look. A few comment below. > So maybe something like which is hopefully the best of > both worlds: > > diff --git a/drivers/of/base.c b/drivers/of/base.c > index 372a177f3b80..63bff37bf035 100644 > --- a/drivers/of/base.c > +++ b/drivers/of/base.c > @@ -1378,9 +1378,13 @@ int of_phandle_iterator_next(struct > of_phandle_iterator *it) > * property data length > */ > if (it->cur + count > it->list_end) { > - pr_err("%pOF: %s = %d found %d\n", > - it->parent, it->cells_name, > - count, it->cell_count); > + if (it->cells_name) > + pr_err("%pOF: %s = %d found %d\n", > + it->parent, it->cells_name, > + count, it->cell_count); Thinking about it, shouldn't we have 'it->list_end - it->cur' instead of it->cell_count here? This change produces: OF: /soc/pinctrl@1000000: (null) = 3 found 2 which looks more correct. This is not related to my original issue, though it might have helped me back then. > + else > + pr_err("%pOF: arguments longer than > property\n", > + it->parent); > goto err; > } > } I think that the best aid would have been the property name. But as far as I can see struct of_phandle_iterator does not preserve the list_name parameter of of_phandle_iterator_init(). Second best would probably be the phandle name, that is of_node_full_name(it->node). It is a little confusing in this case because it->node is the same as it->parent. What do you think? baruch >> arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi >> index 6a22bb5f42f4..a717fc17523d 100644 >> --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi >> +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi >> @@ -220,7 +220,7 @@ tlmm: pinctrl@1000000 { >> interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; >> gpio-controller; >> #gpio-cells = <2>; >> - gpio-ranges = <&tlmm 0 80>; >> + gpio-ranges = <&tlmm 0 0 80>; >> interrupt-controller; >> #interrupt-cells = <2>; >> >>
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index 6a22bb5f42f4..a717fc17523d 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -220,7 +220,7 @@ tlmm: pinctrl@1000000 { interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 80>; + gpio-ranges = <&tlmm 0 0 80>; interrupt-controller; #interrupt-cells = <2>;
There must be three parameters in gpio-ranges property. Fixes this not very helpful error message: OF: /soc/pinctrl@1000000: (null) = 3 found 3 Fixes: 1e8277854b49 ("arm64: dts: Add ipq6018 SoC and CP01 board support") Cc: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il> --- The error message was improved in commit af3be70a321 ("of: Improve of_phandle_iterator_next() error message"), but there is evidently some more room for improvement. As I don't really understand the code, I added the commit author and the DT list to Cc. --- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)