From patchwork Mon Nov 17 23:28:29 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Arnaud Ebalard X-Patchwork-Id: 5324511 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork2.web.kernel.org (Postfix) with ESMTP id E3980C11AC for ; Mon, 17 Nov 2014 23:32:47 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id A46EA20122 for ; Mon, 17 Nov 2014 23:32:46 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.9]) (using TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 6A15520120 for ; Mon, 17 Nov 2014 23:32:45 +0000 (UTC) Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1XqVkX-0007ht-54; Mon, 17 Nov 2014 23:30:25 +0000 Received: from 36.223.133.77.rev.sfr.net ([77.133.223.36] helo=smtp.natisbad.org) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1XqVjF-00050m-3R for linux-arm-kernel@lists.infradead.org; Mon, 17 Nov 2014 23:29:07 +0000 Received: by smtp.natisbad.org (Postfix, from userid 109) id 4463C1700D55; Tue, 18 Nov 2014 00:28:42 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=natisbad.org; s=mail; t=1416266922; bh=g3AsaGBQP+2/m8kdvlmJR1Pxp6JJiREWUW38TDLw+2U=; h=From:To:Cc:Subject:In-Reply-To:References:Date:From; b=gciRvcaKSJE5MVHyjAXCVLG99hDLiVjOwq+pGCINDpg2j4TBUh9eAGDJ+tt9+FRtA 3qrByn8/abvsMbLxB5LOPfMbM3owjsTIpVQn3/WULq02al68oqe3XjHLyt++k6Z/2y eGY+olCfy0jja4SuxkhtWfWZPFwiJKAYBZ0N/kVI= X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Spam-Level: X-Spam-Status: No, score=-2.5 required=5.0 tests=BAYES_00,DKIM_SIGNED, RCVD_IN_DNSWL_LOW, T_DKIM_INVALID, T_RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 Received: from small (localhost [IPv6:::1]) by smtp.natisbad.org (Postfix) with ESMTP id 9E3711700508; Tue, 18 Nov 2014 00:25:08 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=natisbad.org; s=mail; t=1416266709; bh=g3AsaGBQP+2/m8kdvlmJR1Pxp6JJiREWUW38TDLw+2U=; h=From:To:Cc:Subject:In-Reply-To:References:Date:From; b=FPPHySYffJiBdJChDHr6p5ftxguoKbisRo67tnpb8NR1/xpaRln94MHF7sLfRvULx ieSHqoiILlICkcUQruHbplzuxcGOBfkLI050QvrJA0TiMGoV9fHv8NlJV0rB7vhS8o 5YSx24/cO3Bji/K1PcWQbvkGLVF+ZVw4NFgxrdhU= X-Hashcash: 1:20:141117:jason@lakedaemon.net::d+Q6/xL5s8xmc0f5:00000000000000000000000000000000000000000234H X-Hashcash: 1:20:141117:andrew@lunn.ch::MqAv5aCsJL5G6mgO:000Hgac X-Hashcash: 1:20:141117:gregory.clement@free-electrons.com::JLu8k6Pdutz7SG7w:0000000000000000000000000001VPM X-Hashcash: 1:20:141117:sebastian.hesselbarth@gmail.com::SyzypYaPJsZUlJmn:0000000000000000000000000000003UnM X-Hashcash: 1:20:141117:klightspeed@killerwolves.net::JNU7b3rI73yIX6xc:0000000000000000000000000000000001lhb X-Hashcash: 1:20:141117:linux@arm.linux.org.uk::CArhM9ItxpttBhOm:0000000000000000000000000000000000000006743 X-Hashcash: 1:20:141117:linux-arm-kernel@lists.infradead.org::+voGZ5+LS/qgN1z9:000000000000000000000000017gr X-Hashcash: 1:20:141117:rob.herring@calxeda.com::bjOGFAQ7+YlPyQdB:00000000000000000000000000000000000000BN5c X-Hashcash: 1:20:141117:pawel.moll@arm.com::p3Gg/22l5J3yc/48:0000000000000000000000000000000000000000000279D X-Hashcash: 1:20:141117:mark.rutland@arm.com::Nup8KBCtmHI8uQ6C:000000000000000000000000000000000000000003hAC X-Hashcash: 1:20:141117:swarren@wwwdotorg.org::Hh28sZwLNEwXootP:00000000000000000000000000000000000000000YbJ X-Hashcash: 1:20:141117:ijc+devicetree@hellion.org.uk::li8cgmuCCXqigQRD:000000000000000000000000000000001bFe X-Hashcash: 1:20:141117:devicetree@vger.kernel.org::TEO4BreNsiWCs31k:00000000000000000000000000000000000511J From: Arnaud Ebalard To: Jason Cooper , Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Ben Peddell Subject: [PATCHv3 12/12] arm: mvebu: add .dts file for Synology DS414 In-Reply-To: References: Message-Id: <8c7326cac4c0f7f83c3c8524df48966a23e42149.1416266432.git.arno@natisbad.org> Date: Tue, 18 Nov 2014 00:28:29 +0100 User-Agent: Gnus/5.13 (Gnus v5.13) Emacs/24.3 (gnu/linux) MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20141117_152905_469205_C0232E4E X-CRM114-Status: GOOD ( 22.39 ) X-Spam-Score: 0.3 (/) Cc: Mark Rutland , devicetree@vger.kernel.org, Russell King , Pawel Moll , Stephen Warren , Ian Campbell , Rob Herring , linux-arm-kernel@lists.infradead.org X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.18-1 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Virus-Scanned: ClamAV using ClamSMTP Synology DS414 is a 4-bay NAS powered by a Marvell Armada XP (mv78230 dual-core @1.33Ghz). It is very similar on many aspects to previous 4-bay synology models based on Marvell kirkwood SoC. Here is a short summary of the device: - 1GB RAM - Boot on SPI flash (64Mbit Micron N25Q064) - 2 GbE interfaces (Armada MAC connected to two Marvell 88E1512 PHY via RGMII) - 1 front USB 2.0 ports (directly handled by the Armada 370) - 2 rear USB 3.0 ports (handled by an EtronTech EJ168A XHCI controller on the PCIe bus) - 4 internal SATA ports handled by a Marvell 88SX7042 SATA-II controller on the PCIe bus) - Seiko S-35390A I2C RTC chip - UART0 providing serial console - UART1 used for poweroff (connected to a Microchip PIC16F883) Additional note: the front LEDs the and the two fans are not directly connected to the SoC and under its control. The former are presumably driven by the SATA controller, the latter by the PIC. Signed-off-by: Arnaud Ebalard --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/armada-xp-synology-ds414.dts | 330 +++++++++++++++++++++++++ 2 files changed, 332 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/armada-xp-synology-ds414.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 95387b59ebb2..c181ee8055ac 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -509,7 +509,8 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \ armada-xp-lenovo-ix4-300d.dtb \ armada-xp-matrix.dtb \ armada-xp-netgear-rn2120.dtb \ - armada-xp-openblocks-ax3-4.dtb + armada-xp-openblocks-ax3-4.dtb \ + armada-xp-synology-ds414.dtb dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \ dove-cubox.dtb \ dove-cubox-es.dtb \ diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts new file mode 100644 index 000000000000..25024d0639b2 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -0,0 +1,330 @@ +/* + * Device Tree file for Synology DS414 + * + * Copyright (C) 2014, Arnaud EBALARD + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the old 0xd0000000). + * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot + * bootloaders provided by Marvell. It is used in recent versions of + * DSM software provided by Synology. Nonetheless, some earlier boards + * were delivered with an older version of u-boot that left internal + * registers mapped at 0xd0000000. If you have such a device you will + * not be able to directly boot a kernel based on this Device Tree. In + * that case, the preferred solution is to update your bootloader (e.g. + * by upgrading to latest version of DSM, or building a new one and + * installing it from u-boot prompt) or adjust the Devive Tree + * (s/0xf1000000/0xd0000000/ in 'ranges' below). + */ + +/dts-v1/; + +#include +#include +#include "armada-xp-mv78230.dtsi" + +/ { + model = "Synology DS414"; + compatible = "synology,ds414", "marvell,armadaxp-mv78230", + "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = &uart0; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x40000000>; /* 1GB */ + }; + + soc { + ranges = ; + + pcie-controller { + status = "okay"; + + /* + * Connected to Marvell 88SX7042 SATA-II controller + * handling the four disks. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* + * Connected to EtronTech EJ168A XHCI controller + * providing the two rear USB 3.0 ports. + */ + pcie@5,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; + + internal-regs { + + pinctrl { + sata1_pwr_pin: sata1-pwr-pin { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + + sata2_pwr_pin: sata2-pwr-pin { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + + sata3_pwr_pin: sata3-pwr-pin { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + sata4_pwr_pin: sata4-pwr-pin { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + sata1_pres_pin: sata1-pres-pin { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + + sata2_pres_pin: sata2-pres-pin { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + + sata3_pres_pin: sata3-pres-pin { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + sata4_pres_pin: sata4-pres-pin { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + syno_id_bit0_pin: syno-id-bit0-pin { + marvell,pins = "mpp26"; + marvell,function = "gpio"; + }; + + pmx_syno_id_bit1: syno-id-bit1-pin { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + + pmx_syno_id_bit2: syno-id-bit2-pin { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_fan1_alarm: fan1-alarm-pin { + marvell,pins = "mpp33"; + marvell,function = "gpio"; + }; + + fan2_alarm_pin: fan2-alarm-pin { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; + }; + + mdio { + phy0: ethernet-phy@0 { /* Marvell 88E1512 */ + reg = <0>; + }; + + phy1: ethernet-phy@1 { /* Marvell 88E1512 */ + reg = <1>; + }; + }; + + ethernet@70000 { + status = "okay"; + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + spi0: spi@10600 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q064"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + + /* + * Warning! + * + * Synology u-boot uses its compiled-in environment + * and it seems Synology did not care to change u-boot + * default configuration in order to allow saving a + * modified environment at a sensible location. So, + * if you do a 'saveenv' under u-boot, your modified + * environment will be saved at 1MB after the start + * of the flash, i.e. in the middle of the uImage. + * For that reason, it is strongly advised not to + * change the default environment, unless you know + * what you are doing. + */ + partition@00000000 { /* u-boot */ + label = "RedBoot"; + reg = <0x00000000 0x000d0000>; /* 832KB */ + }; + + partition@000c0000 { /* uImage */ + label = "zImage"; + reg = <0x000d0000 0x002d0000>; /* 2880KB */ + }; + + partition@003a0000 { /* uInitramfs */ + label = "rd.gz"; + reg = <0x003a0000 0x00430000>; /* 4250KB */ + }; + + partition@007d0000 { /* MAC address and serial number */ + label = "vendor"; + reg = <0x007d0000 0x00010000>; /* 64KB */ + }; + + partition@007e0000 { + label = "RedBoot config"; + reg = <0x007e0000 0x00010000>; /* 64KB */ + }; + + partition@007f0000 { + label = "FIS directory"; + reg = <0x007f0000 0x00010000>; /* 64KB */ + }; + }; + }; + + /* Front USB 2.0 port */ + usb@50000 { + status = "okay"; + }; + + i2c@11000 { + clock-frequency = <400000>; + status = "okay"; + + s35390a: s35390a@30 { + compatible = "sii,s35390a"; + reg = <0x30>; + }; + }; + + /* RTC is provided by Seiko S-35390A above */ + rtc@10300 { + status = "disabled"; + }; + + /* Connected to a header on device's PCB. This + * provides the main console for the device. + * + * Warning: the device may not boot with a 3.3V + * USB-serial converter connected when the power + * button is pressed. The converter needs to be + * connected a few seconds after pressing the + * power button. This is possibly due to UART0_TXD + * pin being sampled at reset (bit 0 of SAR). + */ + serial@12000 { + status = "okay"; + }; + + /* Connected to a Microchip PIC16F883 for power control */ + serial@12100 { + status = "okay"; + }; + + poweroff@12100 { + compatible = "synology,power-off"; + reg = <0x12100 0x100>; + clocks = <&coreclk 0>; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin + &sata3_pwr_pin &sata4_pwr_pin>; + pinctrl-names = "default"; + + sata1_regulator: sata1-regulator { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <2000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; + + sata2_regulator: sata2-regulator { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "SATA2 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <4000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + }; + + sata3_regulator: sata3-regulator { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "SATA3 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <6000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; + }; + + sata4_regulator: sata4-regulator { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "SATA4 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <8000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + }; +};