diff mbox

[v3,3/6] arm: dts: add Artpec-6 development board dts

Message ID 8f47493c9ed0044d17333a99c07e9067861ee96b.1455205057.git.larper@axis.com (mailing list archive)
State New, archived
Headers show

Commit Message

Lars Persson Feb. 11, 2016, 4:06 p.m. UTC 
Signed-off-by: Lars Persson <larper@axis.com>
---
 arch/arm/boot/dts/Makefile             |  2 ++
 arch/arm/boot/dts/artpec6-devboard.dts | 64 ++++++++++++++++++++++++++++++++++
 2 files changed, 66 insertions(+)
 create mode 100644 arch/arm/boot/dts/artpec6-devboard.dts
diff mbox

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a4a6d70..2ebe99c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -2,6 +2,8 @@  ifeq ($(CONFIG_OF),y)
 
 dtb-$(CONFIG_ARCH_ALPINE) += \
 	alpine-db.dtb
+dtb-$(CONFIG_MACH_ARTPEC6) += \
+	artpec6-devboard.dtb
 dtb-$(CONFIG_MACH_ASM9260) += \
 	alphascale-asm9260-devkit.dtb
 # Keep at91 dtb files sorted alphabetically for each SoC
diff --git a/arch/arm/boot/dts/artpec6-devboard.dts b/arch/arm/boot/dts/artpec6-devboard.dts
new file mode 100644
index 0000000..f823ed3
--- /dev/null
+++ b/arch/arm/boot/dts/artpec6-devboard.dts
@@ -0,0 +1,64 @@ 
+/*
+ * Axis ARTPEC-6 development board.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "artpec6.dtsi"
+
+/ {
+	model = "ARTPEC-6 development board";
+	compatible = "axis,artpec6-dev-board", "axis,artpec6";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x10000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&ethernet {
+	status = "okay";
+
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+
+	mdio {
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		phy1: phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			device_type = "ethernet-phy";
+			reg = <0x0>;
+		};
+	};
+};