| Message ID | 90a5a60b6f4cc84321370acaa0f2876dcaae7580.1673270769.git.quic_schowdhu@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | soc: qcom: dcc: Add QAD, Cti-trigger and Bootconfig support for Data Capture and Compare(DCC) | expand |
On Mon, Jan 09, 2023 at 07:32:26PM +0530, Souradeep Chowdhury wrote: > Add the QAD, ctitrigger and bootconfig support for dcc driver. > The QAD is used for access control of the DCC configurations > and can be set or unset by writing to DCC_QAD_OUTPUT register. > The Cti-trigger is used for the cross trigger interface, on > enabling it the software trigger can be initiated for dcc by > setting the cti-trigout. > Bootconfig support for DCC is for configuring register values > to dcc at boot time, this is needed for debugging crashes that > happen at boot time. > Add the debugfs files QAD and CTI-trigger for each list folder. > Also add hwtrigger debugfs file which needs to be disabled on > enabling the cti-trigger. > > Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com> > --- > Documentation/ABI/testing/debugfs-driver-dcc | 24 +++ > drivers/soc/qcom/dcc.c | 284 ++++++++++++++++++++++++++- > 2 files changed, 304 insertions(+), 4 deletions(-) > > diff --git a/Documentation/ABI/testing/debugfs-driver-dcc b/Documentation/ABI/testing/debugfs-driver-dcc > index 27ed591..f817a9f 100644 > --- a/Documentation/ABI/testing/debugfs-driver-dcc > +++ b/Documentation/ABI/testing/debugfs-driver-dcc > @@ -125,3 +125,27 @@ Description: > on manual or crash induced triggers. Lists must > be configured and enabled sequentially, e.g. list > 2 can only be enabled when list 1 have so. > + > +What: /sys/kernel/debug/dcc/.../[list-number]/ctitrigger > +Date: January 2023 > +Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com> > +Description: > + This debugfs interface is used for enabling the > + ctitrigger. Ctitrigger can be enabled by writing > + a '1' to the file. > + > +What: /sys/kernel/debug/dcc/.../[list-number]/QAD > +Date: January 2023 > +Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com> > +Description: > + This debugfs interface is used for enabling the > + ctitrigger. Ctitrigger can be enabled by writing > + a '1' to the file. > + > +What: /sys/kernel/debug/dcc/.../[list-number]/hwtrigger > +Date: January 2023 > +Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com> > +Description: > + This debugfs interface is used for enabling the > + hwtrigger support. Hwtrigger can be enabled by > + writing a '1' to the file. > diff --git a/drivers/soc/qcom/dcc.c b/drivers/soc/qcom/dcc.c > index 5b50d63..ea44dbf 100644 > --- a/drivers/soc/qcom/dcc.c > +++ b/drivers/soc/qcom/dcc.c > @@ -6,6 +6,7 @@ > > #include <linux/bitfield.h> > #include <linux/bitops.h> > +#include <linux/bootconfig.h> > #include <linux/debugfs.h> > #include <linux/delay.h> > #include <linux/fs.h> > @@ -36,6 +37,8 @@ > #define DCC_LL_INT_STATUS 0x1c > #define DCC_LL_SW_TRIGGER 0x2c > #define DCC_LL_BUS_ACCESS_STATUS 0x30 > +#define DCC_CTI_TRIG 0x34 > +#define DCC_QAD_OUTPUT 0x38 > > /* Default value used if a bit 6 in the HW_INFO register is set. */ > #define DCC_FIX_LOOP_OFFSET 16 > @@ -114,6 +117,9 @@ struct dcc_config_entry { > * @nr_link_list: Total number of linkedlists supported by the DCC configuration > * @loop_shift: Loop offset bits range for the addresses > * @enable_bitmap: Bitmap to capture the enabled status of each linked list of addresses > + * @cti_bitmap: Bitmap to capture the cti-trigger status of each linked list of addresses > + * @qad_bitmap: Bitmap to capture the qad status of each linked list of addresses > + * @hwtrig_bitmap: Bitmap to capture the hwtrig status of each linked list of addresses > */ > struct dcc_drvdata { > void __iomem *base; > @@ -131,6 +137,9 @@ struct dcc_drvdata { > size_t nr_link_list; > u8 loop_shift; > unsigned long *enable_bitmap; > + unsigned long *cti_bitmap; > + unsigned long *qad_bitmap; > + unsigned long *hwtrig_bitmap; > }; > > struct dcc_cfg_attr { > @@ -148,6 +157,18 @@ struct dcc_cfg_loop_attr { > bool loop_start; > }; > > +static char *replace_char(char *str, char find, char replace) > +{ > + char *current_pos = strchr(str, find); > + > + while (current_pos) { > + *current_pos = replace; > + current_pos = strchr(current_pos, find); > + } > + > + return str; > +} > + > static inline u32 dcc_list_offset(int version) > { > return version == 1 ? 0x1c : version == 2 ? 0x2c : 0x34; > @@ -201,6 +222,10 @@ static int dcc_sw_trigger(struct dcc_drvdata *drvdata) > continue; > ll_cfg = dcc_list_readl(drvdata, i, DCC_LL_CFG); > tmp_ll_cfg = ll_cfg & ~DCC_TRIGGER_MASK; > + if (drvdata->mem_map_ver != 3) > + tmp_ll_cfg = ll_cfg & ~DCC_TRIGGER_MASK; > + else > + tmp_ll_cfg = ll_cfg & ~BIT(8); > dcc_list_writel(drvdata, tmp_ll_cfg, i, DCC_LL_CFG); > dcc_list_writel(drvdata, 1, i, DCC_LL_SW_TRIGGER); > dcc_list_writel(drvdata, ll_cfg, i, DCC_LL_CFG); > @@ -577,6 +602,25 @@ static int dcc_enable(struct dcc_drvdata *drvdata, unsigned int curr_list) > /* 5. Configure trigger */ > dcc_list_writel(drvdata, DCC_TRIGGER_MASK, > curr_list, DCC_LL_CFG); > + if (drvdata->mem_map_ver == 3) { > + dcc_list_writel(drvdata, test_bit(curr_list, drvdata->qad_bitmap), curr_list, > + DCC_QAD_OUTPUT); > + dcc_list_writel(drvdata, test_bit(curr_list, drvdata->cti_bitmap), curr_list, > + DCC_CTI_TRIG); > + if (test_bit(curr_list, drvdata->hwtrig_bitmap)) > + dcc_list_writel(drvdata, BIT(8), curr_list, DCC_LL_CFG); > + else > + dcc_list_writel(drvdata, (unsigned int)~BIT(8), curr_list, DCC_LL_CFG); > + } else { > + if (test_bit(curr_list, drvdata->hwtrig_bitmap)) > + dcc_list_writel(drvdata, DCC_TRIGGER_MASK | > + test_bit(curr_list, drvdata->cti_bitmap) << 8, > + curr_list, DCC_LL_CFG); > + else > + dcc_list_writel(drvdata, ~DCC_TRIGGER_MASK & > + test_bit(curr_list, drvdata->cti_bitmap) << 8, > + curr_list, DCC_LL_CFG); > + } > > out_unlock: > mutex_unlock(&drvdata->mutex); > @@ -1103,6 +1147,168 @@ static const struct file_operations config_fops = { > .release = single_release, > }; > > +static ssize_t ctitrigger_read(struct file *filp, char __user *userbuf, > + size_t count, loff_t *ppos) > +{ > + char *buf; > + int curr_list; > + struct dcc_drvdata *drvdata = filp->private_data; > + > + curr_list = dcc_filp_curr_list(filp); > + > + mutex_lock(&drvdata->mutex); > + > + if (test_bit(curr_list, drvdata->cti_bitmap)) > + buf = "Y\n"; > + else > + buf = "N\n"; > + > + mutex_unlock(&drvdata->mutex); > + > + return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf)); > +} > + > +static ssize_t ctitrigger_write(struct file *filp, const char __user *userbuf, > + size_t count, loff_t *ppos) > +{ > + int ret = 0, curr_list; > + bool val; > + struct dcc_drvdata *drvdata = filp->private_data; > + > + curr_list = dcc_filp_curr_list(filp); > + > + if (test_bit(curr_list, drvdata->enable_bitmap)) > + return -EBUSY; > + > + ret = kstrtobool_from_user(userbuf, count, &val); > + if (ret < 0) > + return 0; > + > + if (val) > + set_bit(curr_list, drvdata->cti_bitmap); > + else > + clear_bit(curr_list, drvdata->cti_bitmap); > + > + return count; > +} > + > +static const struct file_operations ctitrigger_fops = { > + .read = ctitrigger_read, > + .write = ctitrigger_write, > + .open = simple_open, > + .llseek = generic_file_llseek, > +}; > + > +static ssize_t qad_read(struct file *filp, char __user *userbuf, > + size_t count, loff_t *ppos) > +{ > + char *buf; > + int curr_list; > + > + struct dcc_drvdata *drvdata = filp->private_data; > + > + curr_list = dcc_filp_curr_list(filp); > + > + mutex_lock(&drvdata->mutex); > + > + if (test_bit(curr_list, drvdata->qad_bitmap)) > + buf = "Y\n"; > + else > + buf = "N\n"; > + > + mutex_unlock(&drvdata->mutex); > + > + return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf)); > +} > + > +static ssize_t qad_write(struct file *filp, const char __user *userbuf, > + size_t count, loff_t *ppos) > +{ > + int ret = 0, curr_list; First use of ret is an assignment, no need to assign it here. > + bool val; > + struct dcc_drvdata *drvdata = filp->private_data; > + > + curr_list = dcc_filp_curr_list(filp); > + > + if (drvdata->mem_map_ver != 3) { > + dev_err(drvdata->dev, "QAD is not supported\n"); > + return -EINVAL; > + } > + > + if (test_bit(curr_list, drvdata->enable_bitmap)) > + return -EBUSY; > + > + ret = kstrtobool_from_user(userbuf, count, &val); > + if (ret < 0) > + return 0; 0 isn't a good return value here. > + > + if (val) > + set_bit(curr_list, drvdata->qad_bitmap); > + else > + clear_bit(curr_list, drvdata->qad_bitmap); > + > + return count; > +} > + > +static const struct file_operations qad_fops = { > + .read = qad_read, > + .write = qad_write, > + .open = simple_open, > + .llseek = generic_file_llseek, > +}; > + > +static ssize_t hwtrigger_read(struct file *filp, char __user *userbuf, > + size_t count, loff_t *ppos) > +{ > + char *buf; > + int curr_list; > + struct dcc_drvdata *drvdata = filp->private_data; > + > + curr_list = dcc_filp_curr_list(filp); > + > + mutex_lock(&drvdata->mutex); > + > + if (test_bit(curr_list, drvdata->hwtrig_bitmap)) > + buf = "Y\n"; > + else > + buf = "N\n"; > + > + mutex_unlock(&drvdata->mutex); > + > + return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf)); > +} > + > +static ssize_t hwtrigger_write(struct file *filp, const char __user *userbuf, > + size_t count, loff_t *ppos) > +{ > + int ret = 0, curr_list; > + bool val; > + struct dcc_drvdata *drvdata = filp->private_data; > + > + curr_list = dcc_filp_curr_list(filp); > + > + if (test_bit(curr_list, drvdata->enable_bitmap)) > + return -EBUSY; > + > + ret = kstrtobool_from_user(userbuf, count, &val); > + if (ret < 0) > + return ret; > + > + if (val) > + set_bit(curr_list, drvdata->hwtrig_bitmap); > + else > + clear_bit(curr_list, drvdata->hwtrig_bitmap); > + > + return count; > +} > + > +static const struct file_operations hwtrigger_fops = { > + .read = hwtrigger_read, > + .write = hwtrigger_write, > + .open = simple_open, > + .llseek = generic_file_llseek, > +}; > + > static void dcc_delete_debug_dir(struct dcc_drvdata *drvdata) > { > debugfs_remove_recursive(drvdata->dbg_dir); > @@ -1126,6 +1332,9 @@ static void dcc_create_debug_dir(struct dcc_drvdata *drvdata) > list = debugfs_create_dir(list_num, drvdata->dbg_dir); > debugfs_create_file("enable", 0600, list, drvdata, &enable_fops); > debugfs_create_file("config", 0600, list, drvdata, &config_fops); > + debugfs_create_file("ctitrigger", 0600, list, drvdata, &ctitrigger_fops); > + debugfs_create_file("QAD", 0600, list, drvdata, &qad_fops); > + debugfs_create_file("hwtrigger", 0600, list, drvdata, &hwtrigger_fops); > } > > debugfs_create_file("trigger", 0200, drvdata->dbg_dir, drvdata, &trigger_fops); > @@ -1185,13 +1394,60 @@ static void dcc_sram_dev_exit(struct dcc_drvdata *drvdata) > misc_deregister(&drvdata->sram_dev); > } > > -static int dcc_probe(struct platform_device *pdev) > +static int __init dcc_bootconfig_parse(struct dcc_drvdata *drvdata, struct xbc_node *dcc_node) > +{ > + struct xbc_node *linked_list, *node; > + int curr_list, ret; > + const char *p; > + char *input, *token; > + char val[30]; > + > + xbc_node_for_each_subkey(dcc_node, linked_list) { > + p = xbc_node_find_value(linked_list, "qcom-curr-link-list", &node); > + if (p) { So if I specify dcc-config { list1 { qcom-curr-link-list = 1 } list2 { } } Then list2 should have &curr_list of 1 as well? Or did you miss the error handling here? PS. I think you can skip the "qcom-" prefix. Frankly, you know that you're in a subnode of dcc_config; use "id" and "items" ("list"?). > + ret = kstrtoint(p, 0, &curr_list); > + if (ret) > + return ret; > + } > + > + p = xbc_node_find_value(linked_list, "qcom-link-list", &node); > + if (!p) > + continue; > + > + xbc_array_for_each_value(node, p) { > + snprintf(val, sizeof(val), "%s", p); strscpy() would be less costly. > + input = replace_char(val, '_', ' '); > + token = strsep(&input, " "); > + > + if (!strcmp("R", token)) { > + ret = dcc_config_add_read(drvdata, input, curr_list); > + } else if (!strcmp("W", token)) { > + ret = dcc_config_add_write(drvdata, input, curr_list); > + } else if (!strcmp("RW", token)) { > + ret = dcc_config_add_read_write(drvdata, input, curr_list); > + } else if (!strcmp("L", token)) { > + ret = dcc_config_add_loop(drvdata, input, curr_list); > + } else { > + dev_err(drvdata->dev, "%s is not a correct input\n", token); > + return -EINVAL; > + } > + if (ret) > + return ret; > + } > + dcc_enable(drvdata, curr_list); > + } > + > + return 0; > +} > + > +static int __init dcc_probe(struct platform_device *pdev) > { > u32 val; > int ret = 0, i; > struct device *dev = &pdev->dev; > struct dcc_drvdata *drvdata; > struct resource *res; > + struct xbc_node *dcc_node; > > drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); > if (!drvdata) > @@ -1247,13 +1503,30 @@ static int dcc_probe(struct platform_device *pdev) > if (!drvdata->enable_bitmap) > return -ENOMEM; > > + drvdata->cti_bitmap = devm_kcalloc(dev, BITS_TO_LONGS(drvdata->nr_link_list), > + sizeof(*drvdata->cti_bitmap), GFP_KERNEL); How about devm_bitmap_alloc()? > + if (!drvdata->cti_bitmap) > + return -ENOMEM; > + > + drvdata->qad_bitmap = devm_kcalloc(dev, BITS_TO_LONGS(drvdata->nr_link_list), > + sizeof(*drvdata->qad_bitmap), GFP_KERNEL); > + if (!drvdata->qad_bitmap) > + return -ENOMEM; > + > + drvdata->hwtrig_bitmap = devm_kcalloc(dev, BITS_TO_LONGS(drvdata->nr_link_list), > + sizeof(*drvdata->hwtrig_bitmap), GFP_KERNEL); > + if (!drvdata->hwtrig_bitmap) > + return -ENOMEM; > + > drvdata->cfg_head = devm_kcalloc(dev, drvdata->nr_link_list, > sizeof(*drvdata->cfg_head), GFP_KERNEL); > if (!drvdata->cfg_head) > return -ENOMEM; > > - for (i = 0; i < drvdata->nr_link_list; i++) > + for (i = 0; i < drvdata->nr_link_list; i++) { > INIT_LIST_HEAD(&drvdata->cfg_head[i]); > + set_bit(i, drvdata->hwtrig_bitmap); > + } > > ret = dcc_sram_dev_init(drvdata); > if (ret) { > @@ -1263,6 +1536,10 @@ static int dcc_probe(struct platform_device *pdev) > > dcc_create_debug_dir(drvdata); > > + dcc_node = xbc_find_node("dcc_config"); > + if (dcc_node) > + return dcc_bootconfig_parse(drvdata, dcc_node); Wouldn't it make sense to still probe dcc, even if the configuration is rejected? > + > return 0; > } > > @@ -1287,14 +1564,13 @@ static const struct of_device_id dcc_match_table[] = { > MODULE_DEVICE_TABLE(of, dcc_match_table); > > static struct platform_driver dcc_driver = { > - .probe = dcc_probe, > .remove = dcc_remove, > .driver = { > .name = "qcom-dcc", > .of_match_table = dcc_match_table, > }, > }; > -module_platform_driver(dcc_driver); > +module_platform_driver_probe(dcc_driver, dcc_probe); This change is unrelated to the others, and I don't see it mentioned in your commit message. Regards, Bjorn > > MODULE_LICENSE("GPL"); > MODULE_DESCRIPTION("Qualcomm Technologies Inc. DCC driver"); > -- > 2.7.4 >
On 1/9/2023 9:10 PM, Bjorn Andersson wrote: > On Mon, Jan 09, 2023 at 07:32:26PM +0530, Souradeep Chowdhury wrote: >> Add the QAD, ctitrigger and bootconfig support for dcc driver. >> The QAD is used for access control of the DCC configurations >> and can be set or unset by writing to DCC_QAD_OUTPUT register. >> The Cti-trigger is used for the cross trigger interface, on >> enabling it the software trigger can be initiated for dcc by >> setting the cti-trigout. >> Bootconfig support for DCC is for configuring register values >> to dcc at boot time, this is needed for debugging crashes that >> happen at boot time. >> Add the debugfs files QAD and CTI-trigger for each list folder. >> Also add hwtrigger debugfs file which needs to be disabled on >> enabling the cti-trigger. >> >> Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com> >> --- >> Documentation/ABI/testing/debugfs-driver-dcc | 24 +++ >> drivers/soc/qcom/dcc.c | 284 ++++++++++++++++++++++++++- >> 2 files changed, 304 insertions(+), 4 deletions(-) >> >> diff --git a/Documentation/ABI/testing/debugfs-driver-dcc b/Documentation/ABI/testing/debugfs-driver-dcc >> index 27ed591..f817a9f 100644 >> --- a/Documentation/ABI/testing/debugfs-driver-dcc >> +++ b/Documentation/ABI/testing/debugfs-driver-dcc >> @@ -125,3 +125,27 @@ Description: >> on manual or crash induced triggers. Lists must >> be configured and enabled sequentially, e.g. list >> 2 can only be enabled when list 1 have so. >> + >> +What: /sys/kernel/debug/dcc/.../[list-number]/ctitrigger >> +Date: January 2023 >> +Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com> >> +Description: >> + This debugfs interface is used for enabling the >> + ctitrigger. Ctitrigger can be enabled by writing >> + a '1' to the file. >> + >> +What: /sys/kernel/debug/dcc/.../[list-number]/QAD >> +Date: January 2023 >> +Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com> >> +Description: >> + This debugfs interface is used for enabling the >> + ctitrigger. Ctitrigger can be enabled by writing >> + a '1' to the file. >> + >> +What: /sys/kernel/debug/dcc/.../[list-number]/hwtrigger >> +Date: January 2023 >> +Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com> >> +Description: >> + This debugfs interface is used for enabling the >> + hwtrigger support. Hwtrigger can be enabled by >> + writing a '1' to the file. >> diff --git a/drivers/soc/qcom/dcc.c b/drivers/soc/qcom/dcc.c >> index 5b50d63..ea44dbf 100644 >> --- a/drivers/soc/qcom/dcc.c >> +++ b/drivers/soc/qcom/dcc.c >> @@ -6,6 +6,7 @@ >> >> #include <linux/bitfield.h> >> #include <linux/bitops.h> >> +#include <linux/bootconfig.h> >> #include <linux/debugfs.h> >> #include <linux/delay.h> >> #include <linux/fs.h> >> @@ -36,6 +37,8 @@ >> #define DCC_LL_INT_STATUS 0x1c >> #define DCC_LL_SW_TRIGGER 0x2c >> #define DCC_LL_BUS_ACCESS_STATUS 0x30 >> +#define DCC_CTI_TRIG 0x34 >> +#define DCC_QAD_OUTPUT 0x38 >> >> /* Default value used if a bit 6 in the HW_INFO register is set. */ >> #define DCC_FIX_LOOP_OFFSET 16 >> @@ -114,6 +117,9 @@ struct dcc_config_entry { >> * @nr_link_list: Total number of linkedlists supported by the DCC configuration >> * @loop_shift: Loop offset bits range for the addresses >> * @enable_bitmap: Bitmap to capture the enabled status of each linked list of addresses >> + * @cti_bitmap: Bitmap to capture the cti-trigger status of each linked list of addresses >> + * @qad_bitmap: Bitmap to capture the qad status of each linked list of addresses >> + * @hwtrig_bitmap: Bitmap to capture the hwtrig status of each linked list of addresses >> */ >> struct dcc_drvdata { >> void __iomem *base; >> @@ -131,6 +137,9 @@ struct dcc_drvdata { >> size_t nr_link_list; >> u8 loop_shift; >> unsigned long *enable_bitmap; >> + unsigned long *cti_bitmap; >> + unsigned long *qad_bitmap; >> + unsigned long *hwtrig_bitmap; >> }; >> >> struct dcc_cfg_attr { >> @@ -148,6 +157,18 @@ struct dcc_cfg_loop_attr { >> bool loop_start; >> }; >> >> +static char *replace_char(char *str, char find, char replace) >> +{ >> + char *current_pos = strchr(str, find); >> + >> + while (current_pos) { >> + *current_pos = replace; >> + current_pos = strchr(current_pos, find); >> + } >> + >> + return str; >> +} >> + >> static inline u32 dcc_list_offset(int version) >> { >> return version == 1 ? 0x1c : version == 2 ? 0x2c : 0x34; >> @@ -201,6 +222,10 @@ static int dcc_sw_trigger(struct dcc_drvdata *drvdata) >> continue; >> ll_cfg = dcc_list_readl(drvdata, i, DCC_LL_CFG); >> tmp_ll_cfg = ll_cfg & ~DCC_TRIGGER_MASK; >> + if (drvdata->mem_map_ver != 3) >> + tmp_ll_cfg = ll_cfg & ~DCC_TRIGGER_MASK; >> + else >> + tmp_ll_cfg = ll_cfg & ~BIT(8); >> dcc_list_writel(drvdata, tmp_ll_cfg, i, DCC_LL_CFG); >> dcc_list_writel(drvdata, 1, i, DCC_LL_SW_TRIGGER); >> dcc_list_writel(drvdata, ll_cfg, i, DCC_LL_CFG); >> @@ -577,6 +602,25 @@ static int dcc_enable(struct dcc_drvdata *drvdata, unsigned int curr_list) >> /* 5. Configure trigger */ >> dcc_list_writel(drvdata, DCC_TRIGGER_MASK, >> curr_list, DCC_LL_CFG); >> + if (drvdata->mem_map_ver == 3) { >> + dcc_list_writel(drvdata, test_bit(curr_list, drvdata->qad_bitmap), curr_list, >> + DCC_QAD_OUTPUT); >> + dcc_list_writel(drvdata, test_bit(curr_list, drvdata->cti_bitmap), curr_list, >> + DCC_CTI_TRIG); >> + if (test_bit(curr_list, drvdata->hwtrig_bitmap)) >> + dcc_list_writel(drvdata, BIT(8), curr_list, DCC_LL_CFG); >> + else >> + dcc_list_writel(drvdata, (unsigned int)~BIT(8), curr_list, DCC_LL_CFG); >> + } else { >> + if (test_bit(curr_list, drvdata->hwtrig_bitmap)) >> + dcc_list_writel(drvdata, DCC_TRIGGER_MASK | >> + test_bit(curr_list, drvdata->cti_bitmap) << 8, >> + curr_list, DCC_LL_CFG); >> + else >> + dcc_list_writel(drvdata, ~DCC_TRIGGER_MASK & >> + test_bit(curr_list, drvdata->cti_bitmap) << 8, >> + curr_list, DCC_LL_CFG); >> + } >> >> out_unlock: >> mutex_unlock(&drvdata->mutex); >> @@ -1103,6 +1147,168 @@ static const struct file_operations config_fops = { >> .release = single_release, >> }; >> >> +static ssize_t ctitrigger_read(struct file *filp, char __user *userbuf, >> + size_t count, loff_t *ppos) >> +{ >> + char *buf; >> + int curr_list; >> + struct dcc_drvdata *drvdata = filp->private_data; >> + >> + curr_list = dcc_filp_curr_list(filp); >> + >> + mutex_lock(&drvdata->mutex); >> + >> + if (test_bit(curr_list, drvdata->cti_bitmap)) >> + buf = "Y\n"; >> + else >> + buf = "N\n"; >> + >> + mutex_unlock(&drvdata->mutex); >> + >> + return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf)); >> +} >> + >> +static ssize_t ctitrigger_write(struct file *filp, const char __user *userbuf, >> + size_t count, loff_t *ppos) >> +{ >> + int ret = 0, curr_list; >> + bool val; >> + struct dcc_drvdata *drvdata = filp->private_data; >> + >> + curr_list = dcc_filp_curr_list(filp); >> + >> + if (test_bit(curr_list, drvdata->enable_bitmap)) >> + return -EBUSY; >> + >> + ret = kstrtobool_from_user(userbuf, count, &val); >> + if (ret < 0) >> + return 0; >> + >> + if (val) >> + set_bit(curr_list, drvdata->cti_bitmap); >> + else >> + clear_bit(curr_list, drvdata->cti_bitmap); >> + >> + return count; >> +} >> + >> +static const struct file_operations ctitrigger_fops = { >> + .read = ctitrigger_read, >> + .write = ctitrigger_write, >> + .open = simple_open, >> + .llseek = generic_file_llseek, >> +}; >> + >> +static ssize_t qad_read(struct file *filp, char __user *userbuf, >> + size_t count, loff_t *ppos) >> +{ >> + char *buf; >> + int curr_list; >> + >> + struct dcc_drvdata *drvdata = filp->private_data; >> + >> + curr_list = dcc_filp_curr_list(filp); >> + >> + mutex_lock(&drvdata->mutex); >> + >> + if (test_bit(curr_list, drvdata->qad_bitmap)) >> + buf = "Y\n"; >> + else >> + buf = "N\n"; >> + >> + mutex_unlock(&drvdata->mutex); >> + >> + return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf)); >> +} >> + >> +static ssize_t qad_write(struct file *filp, const char __user *userbuf, >> + size_t count, loff_t *ppos) >> +{ >> + int ret = 0, curr_list; > > First use of ret is an assignment, no need to assign it here. Ack > >> + bool val; >> + struct dcc_drvdata *drvdata = filp->private_data; >> + >> + curr_list = dcc_filp_curr_list(filp); >> + >> + if (drvdata->mem_map_ver != 3) { >> + dev_err(drvdata->dev, "QAD is not supported\n"); >> + return -EINVAL; >> + } >> + >> + if (test_bit(curr_list, drvdata->enable_bitmap)) >> + return -EBUSY; >> + >> + ret = kstrtobool_from_user(userbuf, count, &val); >> + if (ret < 0) >> + return 0; > > 0 isn't a good return value here. Ack > >> + >> + if (val) >> + set_bit(curr_list, drvdata->qad_bitmap); >> + else >> + clear_bit(curr_list, drvdata->qad_bitmap); >> + >> + return count; >> +} >> + >> +static const struct file_operations qad_fops = { >> + .read = qad_read, >> + .write = qad_write, >> + .open = simple_open, >> + .llseek = generic_file_llseek, >> +}; >> + >> +static ssize_t hwtrigger_read(struct file *filp, char __user *userbuf, >> + size_t count, loff_t *ppos) >> +{ >> + char *buf; >> + int curr_list; >> + struct dcc_drvdata *drvdata = filp->private_data; >> + >> + curr_list = dcc_filp_curr_list(filp); >> + >> + mutex_lock(&drvdata->mutex); >> + >> + if (test_bit(curr_list, drvdata->hwtrig_bitmap)) >> + buf = "Y\n"; >> + else >> + buf = "N\n"; >> + >> + mutex_unlock(&drvdata->mutex); >> + >> + return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf)); >> +} >> + >> +static ssize_t hwtrigger_write(struct file *filp, const char __user *userbuf, >> + size_t count, loff_t *ppos) >> +{ >> + int ret = 0, curr_list; >> + bool val; >> + struct dcc_drvdata *drvdata = filp->private_data; >> + >> + curr_list = dcc_filp_curr_list(filp); >> + >> + if (test_bit(curr_list, drvdata->enable_bitmap)) >> + return -EBUSY; >> + >> + ret = kstrtobool_from_user(userbuf, count, &val); >> + if (ret < 0) >> + return ret; >> + >> + if (val) >> + set_bit(curr_list, drvdata->hwtrig_bitmap); >> + else >> + clear_bit(curr_list, drvdata->hwtrig_bitmap); >> + >> + return count; >> +} >> + >> +static const struct file_operations hwtrigger_fops = { >> + .read = hwtrigger_read, >> + .write = hwtrigger_write, >> + .open = simple_open, >> + .llseek = generic_file_llseek, >> +}; >> + >> static void dcc_delete_debug_dir(struct dcc_drvdata *drvdata) >> { >> debugfs_remove_recursive(drvdata->dbg_dir); >> @@ -1126,6 +1332,9 @@ static void dcc_create_debug_dir(struct dcc_drvdata *drvdata) >> list = debugfs_create_dir(list_num, drvdata->dbg_dir); >> debugfs_create_file("enable", 0600, list, drvdata, &enable_fops); >> debugfs_create_file("config", 0600, list, drvdata, &config_fops); >> + debugfs_create_file("ctitrigger", 0600, list, drvdata, &ctitrigger_fops); >> + debugfs_create_file("QAD", 0600, list, drvdata, &qad_fops); >> + debugfs_create_file("hwtrigger", 0600, list, drvdata, &hwtrigger_fops); >> } >> >> debugfs_create_file("trigger", 0200, drvdata->dbg_dir, drvdata, &trigger_fops); >> @@ -1185,13 +1394,60 @@ static void dcc_sram_dev_exit(struct dcc_drvdata *drvdata) >> misc_deregister(&drvdata->sram_dev); >> } >> >> -static int dcc_probe(struct platform_device *pdev) >> +static int __init dcc_bootconfig_parse(struct dcc_drvdata *drvdata, struct xbc_node *dcc_node) >> +{ >> + struct xbc_node *linked_list, *node; >> + int curr_list, ret; >> + const char *p; >> + char *input, *token; >> + char val[30]; >> + >> + xbc_node_for_each_subkey(dcc_node, linked_list) { >> + p = xbc_node_find_value(linked_list, "qcom-curr-link-list", &node); >> + if (p) { > > So if I specify > > dcc-config { > list1 { > qcom-curr-link-list = 1 > } > list2 { > > } > } > > Then list2 should have &curr_list of 1 as well? > > Or did you miss the error handling here? > > > PS. I think you can skip the "qcom-" prefix. Frankly, you know that > you're in a subnode of dcc_config; use "id" and "items" ("list"?). Ack > >> + ret = kstrtoint(p, 0, &curr_list); >> + if (ret) >> + return ret; >> + } >> + >> + p = xbc_node_find_value(linked_list, "qcom-link-list", &node); >> + if (!p) >> + continue; >> + >> + xbc_array_for_each_value(node, p) { >> + snprintf(val, sizeof(val), "%s", p); > > strscpy() would be less costly. Ack > >> + input = replace_char(val, '_', ' '); >> + token = strsep(&input, " "); >> + >> + if (!strcmp("R", token)) { >> + ret = dcc_config_add_read(drvdata, input, curr_list); >> + } else if (!strcmp("W", token)) { >> + ret = dcc_config_add_write(drvdata, input, curr_list); >> + } else if (!strcmp("RW", token)) { >> + ret = dcc_config_add_read_write(drvdata, input, curr_list); >> + } else if (!strcmp("L", token)) { >> + ret = dcc_config_add_loop(drvdata, input, curr_list); >> + } else { >> + dev_err(drvdata->dev, "%s is not a correct input\n", token); >> + return -EINVAL; >> + } >> + if (ret) >> + return ret; >> + } >> + dcc_enable(drvdata, curr_list); >> + } >> + >> + return 0; >> +} >> + >> +static int __init dcc_probe(struct platform_device *pdev) >> { >> u32 val; >> int ret = 0, i; >> struct device *dev = &pdev->dev; >> struct dcc_drvdata *drvdata; >> struct resource *res; >> + struct xbc_node *dcc_node; >> >> drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); >> if (!drvdata) >> @@ -1247,13 +1503,30 @@ static int dcc_probe(struct platform_device *pdev) >> if (!drvdata->enable_bitmap) >> return -ENOMEM; >> >> + drvdata->cti_bitmap = devm_kcalloc(dev, BITS_TO_LONGS(drvdata->nr_link_list), >> + sizeof(*drvdata->cti_bitmap), GFP_KERNEL); > > How about devm_bitmap_alloc()? Ack > >> + if (!drvdata->cti_bitmap) >> + return -ENOMEM; >> + >> + drvdata->qad_bitmap = devm_kcalloc(dev, BITS_TO_LONGS(drvdata->nr_link_list), >> + sizeof(*drvdata->qad_bitmap), GFP_KERNEL); >> + if (!drvdata->qad_bitmap) >> + return -ENOMEM; >> + >> + drvdata->hwtrig_bitmap = devm_kcalloc(dev, BITS_TO_LONGS(drvdata->nr_link_list), >> + sizeof(*drvdata->hwtrig_bitmap), GFP_KERNEL); >> + if (!drvdata->hwtrig_bitmap) >> + return -ENOMEM; >> + >> drvdata->cfg_head = devm_kcalloc(dev, drvdata->nr_link_list, >> sizeof(*drvdata->cfg_head), GFP_KERNEL); >> if (!drvdata->cfg_head) >> return -ENOMEM; >> >> - for (i = 0; i < drvdata->nr_link_list; i++) >> + for (i = 0; i < drvdata->nr_link_list; i++) { >> INIT_LIST_HEAD(&drvdata->cfg_head[i]); >> + set_bit(i, drvdata->hwtrig_bitmap); >> + } >> >> ret = dcc_sram_dev_init(drvdata); >> if (ret) { >> @@ -1263,6 +1536,10 @@ static int dcc_probe(struct platform_device *pdev) >> >> dcc_create_debug_dir(drvdata); >> >> + dcc_node = xbc_find_node("dcc_config"); >> + if (dcc_node) >> + return dcc_bootconfig_parse(drvdata, dcc_node); > > Wouldn't it make sense to still probe dcc, even if the configuration is > rejected? Ack > >> + >> return 0; >> } >> >> @@ -1287,14 +1564,13 @@ static const struct of_device_id dcc_match_table[] = { >> MODULE_DEVICE_TABLE(of, dcc_match_table); >> >> static struct platform_driver dcc_driver = { >> - .probe = dcc_probe, >> .remove = dcc_remove, >> .driver = { >> .name = "qcom-dcc", >> .of_match_table = dcc_match_table, >> }, >> }; >> -module_platform_driver(dcc_driver); >> +module_platform_driver_probe(dcc_driver, dcc_probe); > > This change is unrelated to the others, and I don't see it mentioned > in your commit message. This change is required because dcc_probe needs to defined as a part of __init section so that it can access the bootconfig apis. If dcc is declared as __init, it can't be a part of platform driver which is text section. > > Regards, > Bjorn > >> >> MODULE_LICENSE("GPL"); >> MODULE_DESCRIPTION("Qualcomm Technologies Inc. DCC driver"); >> -- >> 2.7.4 >>
diff --git a/Documentation/ABI/testing/debugfs-driver-dcc b/Documentation/ABI/testing/debugfs-driver-dcc index 27ed591..f817a9f 100644 --- a/Documentation/ABI/testing/debugfs-driver-dcc +++ b/Documentation/ABI/testing/debugfs-driver-dcc @@ -125,3 +125,27 @@ Description: on manual or crash induced triggers. Lists must be configured and enabled sequentially, e.g. list 2 can only be enabled when list 1 have so. + +What: /sys/kernel/debug/dcc/.../[list-number]/ctitrigger +Date: January 2023 +Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com> +Description: + This debugfs interface is used for enabling the + ctitrigger. Ctitrigger can be enabled by writing + a '1' to the file. + +What: /sys/kernel/debug/dcc/.../[list-number]/QAD +Date: January 2023 +Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com> +Description: + This debugfs interface is used for enabling the + ctitrigger. Ctitrigger can be enabled by writing + a '1' to the file. + +What: /sys/kernel/debug/dcc/.../[list-number]/hwtrigger +Date: January 2023 +Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com> +Description: + This debugfs interface is used for enabling the + hwtrigger support. Hwtrigger can be enabled by + writing a '1' to the file. diff --git a/drivers/soc/qcom/dcc.c b/drivers/soc/qcom/dcc.c index 5b50d63..ea44dbf 100644 --- a/drivers/soc/qcom/dcc.c +++ b/drivers/soc/qcom/dcc.c @@ -6,6 +6,7 @@ #include <linux/bitfield.h> #include <linux/bitops.h> +#include <linux/bootconfig.h> #include <linux/debugfs.h> #include <linux/delay.h> #include <linux/fs.h> @@ -36,6 +37,8 @@ #define DCC_LL_INT_STATUS 0x1c #define DCC_LL_SW_TRIGGER 0x2c #define DCC_LL_BUS_ACCESS_STATUS 0x30 +#define DCC_CTI_TRIG 0x34 +#define DCC_QAD_OUTPUT 0x38 /* Default value used if a bit 6 in the HW_INFO register is set. */ #define DCC_FIX_LOOP_OFFSET 16 @@ -114,6 +117,9 @@ struct dcc_config_entry { * @nr_link_list: Total number of linkedlists supported by the DCC configuration * @loop_shift: Loop offset bits range for the addresses * @enable_bitmap: Bitmap to capture the enabled status of each linked list of addresses + * @cti_bitmap: Bitmap to capture the cti-trigger status of each linked list of addresses + * @qad_bitmap: Bitmap to capture the qad status of each linked list of addresses + * @hwtrig_bitmap: Bitmap to capture the hwtrig status of each linked list of addresses */ struct dcc_drvdata { void __iomem *base; @@ -131,6 +137,9 @@ struct dcc_drvdata { size_t nr_link_list; u8 loop_shift; unsigned long *enable_bitmap; + unsigned long *cti_bitmap; + unsigned long *qad_bitmap; + unsigned long *hwtrig_bitmap; }; struct dcc_cfg_attr { @@ -148,6 +157,18 @@ struct dcc_cfg_loop_attr { bool loop_start; }; +static char *replace_char(char *str, char find, char replace) +{ + char *current_pos = strchr(str, find); + + while (current_pos) { + *current_pos = replace; + current_pos = strchr(current_pos, find); + } + + return str; +} + static inline u32 dcc_list_offset(int version) { return version == 1 ? 0x1c : version == 2 ? 0x2c : 0x34; @@ -201,6 +222,10 @@ static int dcc_sw_trigger(struct dcc_drvdata *drvdata) continue; ll_cfg = dcc_list_readl(drvdata, i, DCC_LL_CFG); tmp_ll_cfg = ll_cfg & ~DCC_TRIGGER_MASK; + if (drvdata->mem_map_ver != 3) + tmp_ll_cfg = ll_cfg & ~DCC_TRIGGER_MASK; + else + tmp_ll_cfg = ll_cfg & ~BIT(8); dcc_list_writel(drvdata, tmp_ll_cfg, i, DCC_LL_CFG); dcc_list_writel(drvdata, 1, i, DCC_LL_SW_TRIGGER); dcc_list_writel(drvdata, ll_cfg, i, DCC_LL_CFG); @@ -577,6 +602,25 @@ static int dcc_enable(struct dcc_drvdata *drvdata, unsigned int curr_list) /* 5. Configure trigger */ dcc_list_writel(drvdata, DCC_TRIGGER_MASK, curr_list, DCC_LL_CFG); + if (drvdata->mem_map_ver == 3) { + dcc_list_writel(drvdata, test_bit(curr_list, drvdata->qad_bitmap), curr_list, + DCC_QAD_OUTPUT); + dcc_list_writel(drvdata, test_bit(curr_list, drvdata->cti_bitmap), curr_list, + DCC_CTI_TRIG); + if (test_bit(curr_list, drvdata->hwtrig_bitmap)) + dcc_list_writel(drvdata, BIT(8), curr_list, DCC_LL_CFG); + else + dcc_list_writel(drvdata, (unsigned int)~BIT(8), curr_list, DCC_LL_CFG); + } else { + if (test_bit(curr_list, drvdata->hwtrig_bitmap)) + dcc_list_writel(drvdata, DCC_TRIGGER_MASK | + test_bit(curr_list, drvdata->cti_bitmap) << 8, + curr_list, DCC_LL_CFG); + else + dcc_list_writel(drvdata, ~DCC_TRIGGER_MASK & + test_bit(curr_list, drvdata->cti_bitmap) << 8, + curr_list, DCC_LL_CFG); + } out_unlock: mutex_unlock(&drvdata->mutex); @@ -1103,6 +1147,168 @@ static const struct file_operations config_fops = { .release = single_release, }; +static ssize_t ctitrigger_read(struct file *filp, char __user *userbuf, + size_t count, loff_t *ppos) +{ + char *buf; + int curr_list; + struct dcc_drvdata *drvdata = filp->private_data; + + curr_list = dcc_filp_curr_list(filp); + + mutex_lock(&drvdata->mutex); + + if (test_bit(curr_list, drvdata->cti_bitmap)) + buf = "Y\n"; + else + buf = "N\n"; + + mutex_unlock(&drvdata->mutex); + + return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf)); +} + +static ssize_t ctitrigger_write(struct file *filp, const char __user *userbuf, + size_t count, loff_t *ppos) +{ + int ret = 0, curr_list; + bool val; + struct dcc_drvdata *drvdata = filp->private_data; + + curr_list = dcc_filp_curr_list(filp); + + if (test_bit(curr_list, drvdata->enable_bitmap)) + return -EBUSY; + + ret = kstrtobool_from_user(userbuf, count, &val); + if (ret < 0) + return 0; + + if (val) + set_bit(curr_list, drvdata->cti_bitmap); + else + clear_bit(curr_list, drvdata->cti_bitmap); + + return count; +} + +static const struct file_operations ctitrigger_fops = { + .read = ctitrigger_read, + .write = ctitrigger_write, + .open = simple_open, + .llseek = generic_file_llseek, +}; + +static ssize_t qad_read(struct file *filp, char __user *userbuf, + size_t count, loff_t *ppos) +{ + char *buf; + int curr_list; + + struct dcc_drvdata *drvdata = filp->private_data; + + curr_list = dcc_filp_curr_list(filp); + + mutex_lock(&drvdata->mutex); + + if (test_bit(curr_list, drvdata->qad_bitmap)) + buf = "Y\n"; + else + buf = "N\n"; + + mutex_unlock(&drvdata->mutex); + + return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf)); +} + +static ssize_t qad_write(struct file *filp, const char __user *userbuf, + size_t count, loff_t *ppos) +{ + int ret = 0, curr_list; + bool val; + struct dcc_drvdata *drvdata = filp->private_data; + + curr_list = dcc_filp_curr_list(filp); + + if (drvdata->mem_map_ver != 3) { + dev_err(drvdata->dev, "QAD is not supported\n"); + return -EINVAL; + } + + if (test_bit(curr_list, drvdata->enable_bitmap)) + return -EBUSY; + + ret = kstrtobool_from_user(userbuf, count, &val); + if (ret < 0) + return 0; + + if (val) + set_bit(curr_list, drvdata->qad_bitmap); + else + clear_bit(curr_list, drvdata->qad_bitmap); + + return count; +} + +static const struct file_operations qad_fops = { + .read = qad_read, + .write = qad_write, + .open = simple_open, + .llseek = generic_file_llseek, +}; + +static ssize_t hwtrigger_read(struct file *filp, char __user *userbuf, + size_t count, loff_t *ppos) +{ + char *buf; + int curr_list; + struct dcc_drvdata *drvdata = filp->private_data; + + curr_list = dcc_filp_curr_list(filp); + + mutex_lock(&drvdata->mutex); + + if (test_bit(curr_list, drvdata->hwtrig_bitmap)) + buf = "Y\n"; + else + buf = "N\n"; + + mutex_unlock(&drvdata->mutex); + + return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf)); +} + +static ssize_t hwtrigger_write(struct file *filp, const char __user *userbuf, + size_t count, loff_t *ppos) +{ + int ret = 0, curr_list; + bool val; + struct dcc_drvdata *drvdata = filp->private_data; + + curr_list = dcc_filp_curr_list(filp); + + if (test_bit(curr_list, drvdata->enable_bitmap)) + return -EBUSY; + + ret = kstrtobool_from_user(userbuf, count, &val); + if (ret < 0) + return ret; + + if (val) + set_bit(curr_list, drvdata->hwtrig_bitmap); + else + clear_bit(curr_list, drvdata->hwtrig_bitmap); + + return count; +} + +static const struct file_operations hwtrigger_fops = { + .read = hwtrigger_read, + .write = hwtrigger_write, + .open = simple_open, + .llseek = generic_file_llseek, +}; + static void dcc_delete_debug_dir(struct dcc_drvdata *drvdata) { debugfs_remove_recursive(drvdata->dbg_dir); @@ -1126,6 +1332,9 @@ static void dcc_create_debug_dir(struct dcc_drvdata *drvdata) list = debugfs_create_dir(list_num, drvdata->dbg_dir); debugfs_create_file("enable", 0600, list, drvdata, &enable_fops); debugfs_create_file("config", 0600, list, drvdata, &config_fops); + debugfs_create_file("ctitrigger", 0600, list, drvdata, &ctitrigger_fops); + debugfs_create_file("QAD", 0600, list, drvdata, &qad_fops); + debugfs_create_file("hwtrigger", 0600, list, drvdata, &hwtrigger_fops); } debugfs_create_file("trigger", 0200, drvdata->dbg_dir, drvdata, &trigger_fops); @@ -1185,13 +1394,60 @@ static void dcc_sram_dev_exit(struct dcc_drvdata *drvdata) misc_deregister(&drvdata->sram_dev); } -static int dcc_probe(struct platform_device *pdev) +static int __init dcc_bootconfig_parse(struct dcc_drvdata *drvdata, struct xbc_node *dcc_node) +{ + struct xbc_node *linked_list, *node; + int curr_list, ret; + const char *p; + char *input, *token; + char val[30]; + + xbc_node_for_each_subkey(dcc_node, linked_list) { + p = xbc_node_find_value(linked_list, "qcom-curr-link-list", &node); + if (p) { + ret = kstrtoint(p, 0, &curr_list); + if (ret) + return ret; + } + + p = xbc_node_find_value(linked_list, "qcom-link-list", &node); + if (!p) + continue; + + xbc_array_for_each_value(node, p) { + snprintf(val, sizeof(val), "%s", p); + input = replace_char(val, '_', ' '); + token = strsep(&input, " "); + + if (!strcmp("R", token)) { + ret = dcc_config_add_read(drvdata, input, curr_list); + } else if (!strcmp("W", token)) { + ret = dcc_config_add_write(drvdata, input, curr_list); + } else if (!strcmp("RW", token)) { + ret = dcc_config_add_read_write(drvdata, input, curr_list); + } else if (!strcmp("L", token)) { + ret = dcc_config_add_loop(drvdata, input, curr_list); + } else { + dev_err(drvdata->dev, "%s is not a correct input\n", token); + return -EINVAL; + } + if (ret) + return ret; + } + dcc_enable(drvdata, curr_list); + } + + return 0; +} + +static int __init dcc_probe(struct platform_device *pdev) { u32 val; int ret = 0, i; struct device *dev = &pdev->dev; struct dcc_drvdata *drvdata; struct resource *res; + struct xbc_node *dcc_node; drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); if (!drvdata) @@ -1247,13 +1503,30 @@ static int dcc_probe(struct platform_device *pdev) if (!drvdata->enable_bitmap) return -ENOMEM; + drvdata->cti_bitmap = devm_kcalloc(dev, BITS_TO_LONGS(drvdata->nr_link_list), + sizeof(*drvdata->cti_bitmap), GFP_KERNEL); + if (!drvdata->cti_bitmap) + return -ENOMEM; + + drvdata->qad_bitmap = devm_kcalloc(dev, BITS_TO_LONGS(drvdata->nr_link_list), + sizeof(*drvdata->qad_bitmap), GFP_KERNEL); + if (!drvdata->qad_bitmap) + return -ENOMEM; + + drvdata->hwtrig_bitmap = devm_kcalloc(dev, BITS_TO_LONGS(drvdata->nr_link_list), + sizeof(*drvdata->hwtrig_bitmap), GFP_KERNEL); + if (!drvdata->hwtrig_bitmap) + return -ENOMEM; + drvdata->cfg_head = devm_kcalloc(dev, drvdata->nr_link_list, sizeof(*drvdata->cfg_head), GFP_KERNEL); if (!drvdata->cfg_head) return -ENOMEM; - for (i = 0; i < drvdata->nr_link_list; i++) + for (i = 0; i < drvdata->nr_link_list; i++) { INIT_LIST_HEAD(&drvdata->cfg_head[i]); + set_bit(i, drvdata->hwtrig_bitmap); + } ret = dcc_sram_dev_init(drvdata); if (ret) { @@ -1263,6 +1536,10 @@ static int dcc_probe(struct platform_device *pdev) dcc_create_debug_dir(drvdata); + dcc_node = xbc_find_node("dcc_config"); + if (dcc_node) + return dcc_bootconfig_parse(drvdata, dcc_node); + return 0; } @@ -1287,14 +1564,13 @@ static const struct of_device_id dcc_match_table[] = { MODULE_DEVICE_TABLE(of, dcc_match_table); static struct platform_driver dcc_driver = { - .probe = dcc_probe, .remove = dcc_remove, .driver = { .name = "qcom-dcc", .of_match_table = dcc_match_table, }, }; -module_platform_driver(dcc_driver); +module_platform_driver_probe(dcc_driver, dcc_probe); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Qualcomm Technologies Inc. DCC driver");
Add the QAD, ctitrigger and bootconfig support for dcc driver. The QAD is used for access control of the DCC configurations and can be set or unset by writing to DCC_QAD_OUTPUT register. The Cti-trigger is used for the cross trigger interface, on enabling it the software trigger can be initiated for dcc by setting the cti-trigout. Bootconfig support for DCC is for configuring register values to dcc at boot time, this is needed for debugging crashes that happen at boot time. Add the debugfs files QAD and CTI-trigger for each list folder. Also add hwtrigger debugfs file which needs to be disabled on enabling the cti-trigger. Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com> --- Documentation/ABI/testing/debugfs-driver-dcc | 24 +++ drivers/soc/qcom/dcc.c | 284 ++++++++++++++++++++++++++- 2 files changed, 304 insertions(+), 4 deletions(-)