| Message ID | 9156ffe65672c66a7407fe0c71b3c51c5be9c48b.1519398009.git.michal.simek@xilinx.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Feb 23, 2018 at 04:00:21PM +0100, Michal Simek wrote: > zc770 is based board which is extended by FMC/DC cards for SoC > validation. FMCs/DCs are supposed to cover all SoC configurations. > FMC/DC contains can, i2c, nand uart, spi and usb. > > Signed-off-by: Michal Simek <michal.simek@xilinx.com> > --- > > Changes in v2: > - Record compatible string to xilinx.txt > > Documentation/devicetree/bindings/arm/xilinx.txt | 1 + > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/zynq-zc770-xm011.dts | 64 ++++++++++++++++++++++++ > 3 files changed, 66 insertions(+) > create mode 100644 arch/arm/boot/dts/zynq-zc770-xm011.dts Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt index 019e69037d42..80139a7cfcdc 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.txt +++ b/Documentation/devicetree/bindings/arm/xilinx.txt @@ -13,6 +13,7 @@ Additional compatible strings: - Xilinx internal board zc770 with different FMC cards "xlnx,zynq-zc770-xm010" + "xlnx,zynq-zc770-xm011" --------------------------------------------------------------- diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index be9ffae2a1ec..801a46a88e93 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1068,6 +1068,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-zc702.dtb \ zynq-zc706.dtb \ zynq-zc770-xm010.dtb \ + zynq-zc770-xm011.dtb \ zynq-zed.dtb \ zynq-zybo.dtb dtb-$(CONFIG_MACH_ARMADA_370) += \ diff --git a/arch/arm/boot/dts/zynq-zc770-xm011.dts b/arch/arm/boot/dts/zynq-zc770-xm011.dts new file mode 100644 index 000000000000..b78883cee96a --- /dev/null +++ b/arch/arm/boot/dts/zynq-zc770-xm011.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Xilinx ZC770 XM013 board DTS + * + * Copyright (C) 2013-2018 Xilinx, Inc. + */ +/dts-v1/; +#include "zynq-7000.dtsi" + +/ { + compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000"; + model = "Xilinx Zynq"; + + aliases { + i2c0 = &i2c1; + serial0 = &uart1; + spi0 = &spi0; + }; + + chosen { + bootargs = ""; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + usb_phy1: phy1 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&can0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + eeprom: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + }; +}; + +&spi0 { + status = "okay"; + num-cs = <4>; + is-decoded-cs = <0>; +}; + +&uart1 { + status = "okay"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy1>; +};
zc770 is based board which is extended by FMC/DC cards for SoC validation. FMCs/DCs are supposed to cover all SoC configurations. FMC/DC contains can, i2c, nand uart, spi and usb. Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- Changes in v2: - Record compatible string to xilinx.txt Documentation/devicetree/bindings/arm/xilinx.txt | 1 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/zynq-zc770-xm011.dts | 64 ++++++++++++++++++++++++ 3 files changed, 66 insertions(+) create mode 100644 arch/arm/boot/dts/zynq-zc770-xm011.dts