new file mode 100644
@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ethernet-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ethernet Controller Generic Binding
+
+maintainers:
+ - David S. Miller <davem@davemloft.net>
+
+properties:
+ $nodename:
+ pattern: "^ethernet(@.*)?$"
+
+ local-mac-address:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint8-array
+ - minItems: 6
+ maxItems: 6
+ description:
+ Specifies the MAC address that was assigned to the network device.
+
+ mac-address:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint8-array
+ - minItems: 6
+ maxItems: 6
+ description:
+ Specifies the MAC address that was last used by the boot
+ program; should be used in cases where the MAC address assigned
+ to the device by the boot program is different from the
+ local-mac-address property.
+
+ max-frame-size:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ Maximum transfer unit (IEEE defined MTU), rather than the
+ maximum frame size (there\'s contradiction in the Devicetree
+ Specification).
+
+ max-speed:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ Specifies maximum speed in Mbit/s supported by the device.
+
+ nvmem-cells:
+ maxItems: 1
+ description:
+ Reference to an nvmem node for the MAC address
+
+ nvmem-cells-names:
+ const: mac-address
+
+ # Deprecated: phy-mode
+ phy-connection-type:
+ description:
+ Operation mode of the PHY interface
+ enum:
+ # There is not a standard bus between the MAC and the PHY,
+ # something proprietary is being used to embed the PHY in the
+ # MAC.
+ - internal
+ - mii
+ - gmii
+ - sgmii
+ - qsgmii
+ - tbi
+ - rev-mii
+ - rmii
+
+ # RX and TX delays are added by the MAC when required
+ - rgmii
+
+ # RGMII with internal RX and TX delays provided by the PHY,
+ # the MAC should not add the RX or TX delays in this case
+ - rgmii-id
+
+ # RGMII with internal RX delay provided by the PHY, the MAC
+ # should not add an RX delay in this case
+ - rgmii-rxid
+
+ # RGMII with internal TX delay provided by the PHY, the MAC
+ # should not add an TX delay in this case
+ - rgmii-txid
+ - rtbi
+ - smii
+ - xgmii
+ - trgmii
+ - 1000base-x
+ - 2500base-x
+ - rxaui
+ - xaui
+
+ # 10GBASE-KR, XFI, SFI
+ - 10gbase-kr
+ - usxgmii
+
+ # Deprecated: phy, phy-device
+ phy-handle:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ Specifies a reference to a node representing a PHY device.
+
+ rx-fifo-depth:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ The size of the controller\'s receive fifo in bytes. This is used
+ for components that can have configurable receive fifo sizes,
+ and is useful for determining certain configuration settings
+ such as flow control thresholds.
+
+ tx-fifo-depth:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ The size of the controller\'s transmit fifo in bytes. This
+ is used for components that can have configurable fifo sizes.
+
+ managed:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/string
+ - default: auto
+ enum:
+ - auto
+ - in-band-status
+ description:
+ Specifies the PHY management type. If auto is set and fixed-link
+ is not specified, it uses MDIO for management.
+
+ fixed-link:
+ allOf:
+ - if:
+ type: array
+ then:
+ minItems: 1
+ maxItems: 1
+ items:
+ items:
+ - minimum: 0
+ maximum: 31
+ description:
+ Emulated PHY ID, choose any but unique to the all
+ specified fixed-links
+
+ - enum: [0, 1]
+ description:
+ Duplex configuration. 0 for half duplex or 1 for
+ full duplex
+
+ - enum: [10, 100, 1000]
+ description:
+ Link speed in Mbits/sec.
+
+ - enum: [0, 1]
+ description:
+ Pause configuration. 0 for no pause, 1 for pause
+
+ - enum: [0, 1]
+ description:
+ Asymmetric pause configuration. 0 for no asymmetric
+ pause, 1 for asymmetric pause
+
+
+ - if:
+ type: object
+ then:
+ properties:
+ speed:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint32
+ - enum: [10, 100, 1000]
+ description:
+ Link speed.
+
+ full-duplex:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Indicates that full-duplex is used. When absent, half
+ duplex is assumed.
+
+ asym-pause:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Indicates that asym_pause should be enabled.
+
+ link-gpios:
+ maxItems: 1
+ description:
+ GPIO to determine if the link is up
+
+ required:
+ - speed
+
+...
@@ -1,68 +1 @@
-The following properties are common to the Ethernet controllers:
-
-NOTE: All 'phy*' properties documented below are Ethernet specific. For the
-generic PHY 'phys' property, see
-Documentation/devicetree/bindings/phy/phy-bindings.txt.
-
-- mac-address: array of 6 bytes, specifies the MAC address that was last used by
- the boot program; should be used in cases where the MAC address assigned to
- the device by the boot program is different from the "local-mac-address"
- property;
-- local-mac-address: array of 6 bytes, specifies the MAC address that was
- assigned to the network device;
-- nvmem-cells: phandle, reference to an nvmem node for the MAC address
-- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used
-- max-speed: number, specifies maximum speed in Mbit/s supported by the device;
-- max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than
- the maximum frame size (there's contradiction in the Devicetree
- Specification).
-- phy-mode: string, operation mode of the PHY interface. This is now a de-facto
- standard property; supported values are:
- * "internal" (Internal means there is not a standard bus between the MAC and
- the PHY, something proprietary is being used to embed the PHY in the MAC.)
- * "mii"
- * "gmii"
- * "sgmii"
- * "qsgmii"
- * "tbi"
- * "rev-mii"
- * "rmii"
- * "rgmii" (RX and TX delays are added by the MAC when required)
- * "rgmii-id" (RGMII with internal RX and TX delays provided by the PHY, the
- MAC should not add the RX or TX delays in this case)
- * "rgmii-rxid" (RGMII with internal RX delay provided by the PHY, the MAC
- should not add an RX delay in this case)
- * "rgmii-txid" (RGMII with internal TX delay provided by the PHY, the MAC
- should not add an TX delay in this case)
- * "rtbi"
- * "smii"
- * "xgmii"
- * "trgmii"
- * "1000base-x",
- * "2500base-x",
- * "rxaui"
- * "xaui"
- * "10gbase-kr" (10GBASE-KR, XFI, SFI)
- * "usxgmii"
-- phy-connection-type: the same as "phy-mode" property but described in the
- Devicetree Specification;
-- phy-handle: phandle, specifies a reference to a node representing a PHY
- device; this property is described in the Devicetree Specification and so
- preferred;
-- phy: the same as "phy-handle" property, not recommended for new bindings.
-- phy-device: the same as "phy-handle" property, not recommended for new
- bindings.
-- rx-fifo-depth: the size of the controller's receive fifo in bytes. This
- is used for components that can have configurable receive fifo sizes,
- and is useful for determining certain configuration settings such as
- flow control thresholds.
-- tx-fifo-depth: the size of the controller's transmit fifo in bytes. This
- is used for components that can have configurable fifo sizes.
-- managed: string, specifies the PHY management type. Supported values are:
- "auto", "in-band-status". "auto" is the default, it usess MDIO for
- management if fixed-link is not specified.
-
-Child nodes of the Ethernet controller are typically the individual PHY devices
-connected via the MDIO bus (sometimes the MDIO bus controller is separate).
-They are described in the phy.txt file in this same directory.
-For non-MDIO PHY management see fixed-link.txt.
+This file has moved to ethernet-controller.yaml.
@@ -1,54 +1 @@
-Fixed link Device Tree binding
-------------------------------
-
-Some Ethernet MACs have a "fixed link", and are not connected to a
-normal MDIO-managed PHY device. For those situations, a Device Tree
-binding allows to describe a "fixed link".
-
-Such a fixed link situation is described by creating a 'fixed-link'
-sub-node of the Ethernet MAC device node, with the following
-properties:
-
-* 'speed' (integer, mandatory), to indicate the link speed. Accepted
- values are 10, 100 and 1000
-* 'full-duplex' (boolean, optional), to indicate that full duplex is
- used. When absent, half duplex is assumed.
-* 'pause' (boolean, optional), to indicate that pause should be
- enabled.
-* 'asym-pause' (boolean, optional), to indicate that asym_pause should
- be enabled.
-* 'link-gpios' ('gpio-list', optional), to indicate if a gpio can be read
- to determine if the link is up.
-
-Old, deprecated 'fixed-link' binding:
-
-* A 'fixed-link' property in the Ethernet MAC node, with 5 cells, of the
- form <a b c d e> with the following accepted values:
- - a: emulated PHY ID, choose any but but unique to the all specified
- fixed-links, from 0 to 31
- - b: duplex configuration: 0 for half duplex, 1 for full duplex
- - c: link speed in Mbits/sec, accepted values are: 10, 100 and 1000
- - d: pause configuration: 0 for no pause, 1 for pause
- - e: asymmetric pause configuration: 0 for no asymmetric pause, 1 for
- asymmetric pause
-
-Examples:
-
-ethernet@0 {
- ...
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- ...
-};
-
-ethernet@1 {
- ...
- fixed-link {
- speed = <1000>;
- pause;
- link-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- };
- ...
-};
+This file has moved to ethernet-controller.yaml.
The Ethernet controllers have a good number of generic options that can be needed in a device tree. Add a YAML schemas for those. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> --- Changes from v1: - Use an enum for phy-connection-types - Validate the items for the fixed-link array - Set the number of valid items for link-gpios to 1 - Removed deprecated properties (phy-mode, phy, phy-device) --- Documentation/devicetree/bindings/net/ethernet-controller.yaml | 194 +++++++- Documentation/devicetree/bindings/net/ethernet.txt | 69 +-- Documentation/devicetree/bindings/net/fixed-link.txt | 55 +-- 3 files changed, 196 insertions(+), 122 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/ethernet-controller.yaml base-commit: 3f310e51ceb146cfdd4c8872452a1f7fa059af1c