| Message ID | 9b860b47ec3ca64340b4d29317e92b667236d7d1.1623684253.git.michal.simek@xilinx.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: zynqmp: Extend board description | expand |
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts index 1a45e4946dd4..339a12b255c1 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts @@ -25,6 +25,7 @@ aliases { i2c0 = &i2c0; i2c1 = &i2c1; mmc0 = &sdhci1; + nvmem0 = &eeprom; rtc0 = &rtc; serial0 = &uart0; serial1 = &uart1; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts index d7ecfcadd08b..4c328569c3ac 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts @@ -23,6 +23,7 @@ aliases { ethernet0 = &gem3; i2c0 = &i2c1; mmc0 = &sdhci1; + nvmem0 = &eeprom; rtc0 = &rtc; serial0 = &uart0; serial1 = &uart1; @@ -146,7 +147,7 @@ i2c@0 { * 512B - 768B address 0x56 * 768B - 1024B address 0x57 */ - eeprom@54 { /* u23 */ + eeprom: eeprom@54 { /* u23 */ compatible = "atmel,24c08"; reg = <0x54>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts index 403a8ea6a36f..99d172867f6a 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts @@ -23,6 +23,7 @@ aliases { ethernet0 = &gem3; i2c0 = &i2c1; mmc0 = &sdhci1; + nvmem0 = &eeprom; rtc0 = &rtc; serial0 = &uart0; serial1 = &uart1; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts index 186d2e00d4a0..dbb8bfbb5c7f 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -25,6 +25,7 @@ aliases { i2c0 = &i2c0; i2c1 = &i2c1; mmc0 = &sdhci1; + nvmem0 = &eeprom; rtc0 = &rtc; serial0 = &uart0; serial1 = &uart1; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts index e646246a3b14..85e9d0e2f9bd 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts @@ -25,6 +25,7 @@ aliases { i2c0 = &i2c0; i2c1 = &i2c1; mmc0 = &sdhci1; + nvmem0 = &eeprom; rtc0 = &rtc; serial0 = &uart0; serial1 = &dcc;
Use nvmem alias to point to eeprom memory which contains information about board. The change is done based on discussion in the link below. Link: https://lore.kernel.org/r/CAL_JsqLMDqpkyg-Q7mUfw-XH67-v068Q6e9wTq2UOoN=0-_coQ@mail.gmail.com Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- Changes in v2: None arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 1 + arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts | 3 ++- arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts | 1 + arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 1 + arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 1 + 5 files changed, 6 insertions(+), 1 deletion(-)