@@ -115,6 +115,8 @@ config ARCH_VEXPRESS
Express).
config ARCH_XGENE
+ select PCI
+ select NO_GENERIC_PCI_IOPORT_MAP
bool "AppliedMicro X-Gene SOC Family"
help
This enables support for AppliedMicro X-Gene SOC Family
@@ -126,6 +128,23 @@ menu "Bus support"
config ARM_AMBA
bool
+config PCI
+ bool "PCI support"
+ help
+ Find out whether you have a PCI motherboard. PCI is the name of a
+ bus system, i.e. the way the CPU talks to the other stuff inside
+ your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+ VESA. If you have PCI, say Y, otherwise N.
+
+config PCI_DOMAINS
+ bool
+ depends on PCI
+
+config PCI_SYSCALL
+ def_bool PCI
+
+source "drivers/pci/Kconfig"
+
endmenu
menu "Kernel Features"index 0000000..810a408
@@ -0,0 +1,689 @@ +/*
+ * We don't use this to fix the device, but initialisation of it.
+ * It's not the correct use for this, but it works.
+ * Note that the arbiter/ISA bridge appears to be buggy, specifically in
+ * the following area:
+ * 1. park on CPU
+ * 2. ISA bridge ping-pong
+ * 3. ISA bridge master handling of target RETRY
+ *
+ * Bug 3 is responsible for the sound DMA grinding to a halt. We now
+ * live with bug 2.
+ */
+static void pci_fixup_83c553(struct pci_dev *dev)
+{
+ /*
+ * Set memory region to start at address 0, and enable IO
+ */
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0,
+ PCI_BASE_ADDRESS_SPACE_MEMORY);
+ pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO);
+
+ dev->resource[0].end -= dev->resource[0].start;
+ dev->resource[0].start = 0;
+
+ /*
+ * All memory requests from ISA to be channelled to PCI
+ */
+ pci_write_config_byte(dev, 0x48, 0xff);
+
+ /*
+ * Enable ping-pong on bus master to ISA bridge transactions.
+ * This improves the sound DMA substantially. The fixed
+ * priority arbiter also helps (see below).
+ */
+ pci_write_config_byte(dev, 0x42, 0x01);
+
+ /*
+ * Enable PCI retry
+ */
+ pci_write_config_byte(dev, 0x40, 0x22);
+
+ /*
+ * We used to set the arbiter to "park on last master" (bit
+ * 1 set), but unfortunately the CyberPro does not park the
+ * bus. We must therefore park on CPU. Unfortunately, this
+ * may trigger yet another bug in the 553.
+ */
+ pci_write_config_byte(dev, 0x83, 0x02);
+
+ /*
+ * Make the ISA DMA request lowest priority, and disable
+ * rotating priorities completely.
+ */
+ pci_write_config_byte(dev, 0x80, 0x11);
+ pci_write_config_byte(dev, 0x81, 0x00);
+
+ /*
+ * Route INTA input to IRQ 11, and set IRQ11 to be level
+ * sensitive.
+ */
+ pci_write_config_word(dev, 0x44, 0xb000);
+ outb(0x08, 0x4d1);
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_83C553,
+ pci_fixup_83c553);+/*
+ * The CY82C693 needs some rather major fixups to ensure that it does
+ * the right thing. Idea from the Alpha people, with a few additions.
+ *
+ * We ensure that the IDE base registers are set to 1f0/3f4 for the
+ * primary bus, and 170/374 for the secondary bus. Also, hide them
+ * from the PCI subsystem view as well so we won't try to perform
+ * our own auto-configuration on them.
+ *
+ * In addition, we ensure that the PCI IDE interrupts are routed to
+ * IRQ 14 and IRQ 15 respectively.
+ *
+ * The above gets us to a point where the IDE on this device is
+ * functional. However, The CY82C693U _does not work_ in bus
+ * master mode without locking the PCI bus solid.
+ */
+static void pci_fixup_cy82c693(struct pci_dev *dev)
+{
+ if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
+ u32 base0, base1;
+
+ if (dev->class & 0x80) { /* primary */
+ base0 = 0x1f0;
+ base1 = 0x3f4;
+ } else { /* secondary */
+ base0 = 0x170;
+ base1 = 0x374;
+ }
+
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0,
+ base0 | PCI_BASE_ADDRESS_SPACE_IO);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_1,
+ base1 | PCI_BASE_ADDRESS_SPACE_IO);
+
+ dev->resource[0].start = 0;
+ dev->resource[0].end = 0;
+ dev->resource[0].flags = 0;
+
+ dev->resource[1].start = 0;
+ dev->resource[1].end = 0;
+ dev->resource[1].flags = 0;
+ } else if (PCI_FUNC(dev->devfn) == 0) {
+ /*
+ * Setup IDE IRQ routing.
+ */
+ pci_write_config_byte(dev, 0x4b, 14);
+ pci_write_config_byte(dev, 0x4c, 15);
+
+ /*
+ * Disable FREQACK handshake, enable USB.
+ */
+ pci_write_config_byte(dev, 0x4d, 0x41);
+
+ /*
+ * Enable PCI retry, and PCI post-write buffer.
+ */
+ pci_write_config_byte(dev, 0x44, 0x17);
+
+ /*
+ * Enable ISA master and DMA post write buffering.
+ */
+ pci_write_config_byte(dev, 0x45, 0x03);
+ }
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693,
+ pci_fixup_cy82c693);index 0000000..42585c6
@@ -0,0 +1,31 @@
+/*
+ * Based on linux/arch/arm/mm/iomap.c
+ *
+ * Map IO port and PCI memory spaces so that {read,write}[bwl] can
+ * be used to access this memory.
+ */
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+
+#ifdef __io
+void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+ return __io(port);
+}
+EXPORT_SYMBOL(ioport_map);
+
+void ioport_unmap(void __iomem *addr)
+{
+}
+EXPORT_SYMBOL(ioport_unmap);
+#endif
+
+#ifdef CONFIG_PCI
+unsigned long pcibios_min_io = 0x1000;
+EXPORT_SYMBOL(pcibios_min_io);
+
+unsigned long pcibios_min_mem = 0x01000000;
+EXPORT_SYMBOL(pcibios_min_mem);
+#endif
@@ -48,6 +48,7 @@ obj-$(CONFIG_MICROBLAZE) += setup-bus.o
obj-$(CONFIG_TILE) += setup-bus.o setup-irq.o
obj-$(CONFIG_SPARC_LEON) += setup-bus.o setup-irq.o
obj-$(CONFIG_M68K) += setup-bus.o setup-irq.o
+obj-$(CONFIG_ARM64) += setup-bus.o setup-irq.o
#
# ACPI Related PCI FW Functions
> Catalin
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel