Message ID | CAP6yH7cpP7C_h2mJNBqy-UW9_Sg4734j+2dYsK9bdF+99yY3=w@mail.gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hi Grant/Rob, Do you see any issues with this patch? -M On 4 July 2011 19:42, Manjunatha GK <manjugk@ti.com> wrote: > Use helper function of_property_read_u32() in place of > of_get_property and be32_to_cpup() api's for code optimization. > > Compile tested the changes. > > Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> > --- > drivers/of/irq.c | 39 +++++++++++++++++++-------------------- > drivers/of/of_i2c.c | 8 +++----- > drivers/of/of_mdio.c | 8 +++----- > 3 files changed, 25 insertions(+), 30 deletions(-) > > diff --git a/drivers/of/irq.c b/drivers/of/irq.c > index 9f689f1..30cd3b7 100644 > --- a/drivers/of/irq.c > +++ b/drivers/of/irq.c > @@ -59,20 +59,19 @@ EXPORT_SYMBOL_GPL(irq_of_parse_and_map); > struct device_node *of_irq_find_parent(struct device_node *child) > { > struct device_node *p; > - const __be32 *parp; > + u32 parp; > > if (!of_node_get(child)) > return NULL; > > do { > - parp = of_get_property(child, "interrupt-parent", NULL); > - if (parp == NULL) > + if (of_property_read_u32(child, "interrupt-parent", &parp)) > p = of_get_parent(child); > else { > if (of_irq_workarounds & OF_IMAP_NO_PHANDLE) > p = of_node_get(of_irq_dflt_pic); > else > - p = of_find_node_by_phandle(be32_to_cpup(parp)); > + p = of_find_node_by_phandle(parp); > } > of_node_put(child); > child = p; > @@ -100,7 +99,8 @@ int of_irq_map_raw(struct device_node *parent, > const __be32 *intspec, > u32 ointsize, const __be32 *addr, struct of_irq *out_irq) > { > struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL; > - const __be32 *tmp, *imap, *imask; > + const __be32 *imap, *imask; > + u32 tmp; > u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0; > int imaplen, match, i; > > @@ -115,9 +115,8 @@ int of_irq_map_raw(struct device_node *parent, > const __be32 *intspec, > * is none, we are nice and just walk up the tree > */ > do { > - tmp = of_get_property(ipar, "#interrupt-cells", NULL); > - if (tmp != NULL) { > - intsize = be32_to_cpu(*tmp); > + if (!of_property_read_u32(ipar, "#interrupt-cells", &tmp)) { > + intsize = tmp; > break; > } > tnode = ipar; > @@ -139,14 +138,14 @@ int of_irq_map_raw(struct device_node *parent, > const __be32 *intspec, > */ > old = of_node_get(ipar); > do { > - tmp = of_get_property(old, "#address-cells", NULL); > + i = of_property_read_u32(old, "#address-cells", &tmp); > tnode = of_get_parent(old); > of_node_put(old); > old = tnode; > - } while (old && tmp == NULL); > + } while (old && i < 0); > of_node_put(old); > old = NULL; > - addrsize = (tmp == NULL) ? 2 : be32_to_cpu(*tmp); > + addrsize = (i < 0) ? 2 : tmp; > > pr_debug(" -> addrsize=%d\n", addrsize); > > @@ -225,14 +224,14 @@ int of_irq_map_raw(struct device_node *parent, > const __be32 *intspec, > /* Get #interrupt-cells and #address-cells of new > * parent > */ > - tmp = of_get_property(newpar, "#interrupt-cells", NULL); > - if (tmp == NULL) { > + if (of_property_read_u32(newpar, "#interrupt-cells", > + &tmp)) { > pr_debug(" -> parent lacks #interrupt-cells!\n"); > goto fail; > } > - newintsize = be32_to_cpu(*tmp); > - tmp = of_get_property(newpar, "#address-cells", NULL); > - newaddrsize = (tmp == NULL) ? 0 : be32_to_cpu(*tmp); > + newintsize = tmp; > + i = of_property_read_u32(newpar, "#address-cells", &tmp); > + newaddrsize = (i < 0) ? 0 : tmp; > > pr_debug(" -> newintsize=%d, newaddrsize=%d\n", > newintsize, newaddrsize); > @@ -284,7 +283,8 @@ EXPORT_SYMBOL_GPL(of_irq_map_raw); > int of_irq_map_one(struct device_node *device, int index, struct > of_irq *out_irq) > { > struct device_node *p; > - const __be32 *intspec, *tmp, *addr; > + const __be32 *intspec, *addr; > + u32 tmp; > u32 intsize, intlen; > int res = -EINVAL; > > @@ -311,10 +311,9 @@ int of_irq_map_one(struct device_node *device, > int index, struct of_irq *out_irq > return -EINVAL; > > /* Get size of interrupt specifier */ > - tmp = of_get_property(p, "#interrupt-cells", NULL); > - if (tmp == NULL) > + if (of_property_read_u32(p, "#interrupt-cells", &tmp)) > goto out; > - intsize = be32_to_cpu(*tmp); > + intsize = tmp; > > pr_debug(" intsize=%d intlen=%d\n", intsize, intlen); > > diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c > index f37fbeb..371b591 100644 > --- a/drivers/of/of_i2c.c > +++ b/drivers/of/of_i2c.c > @@ -32,8 +32,7 @@ void of_i2c_register_devices(struct i2c_adapter *adap) > for_each_child_of_node(adap->dev.of_node, node) { > struct i2c_board_info info = {}; > struct dev_archdata dev_ad = {}; > - const __be32 *addr; > - int len; > + u32 addr; > > dev_dbg(&adap->dev, "of_i2c: register %s\n", node->full_name); > > @@ -43,14 +42,13 @@ void of_i2c_register_devices(struct i2c_adapter *adap) > continue; > } > > - addr = of_get_property(node, "reg", &len); > - if (!addr || (len < sizeof(int))) { > + if (of_property_read_u32(node, "reg", &addr)) { > dev_err(&adap->dev, "of_i2c: invalid reg on %s\n", > node->full_name); > continue; > } > > - info.addr = be32_to_cpup(addr); > + info.addr = addr; > if (info.addr > (1 << 10) - 1) { > dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n", > info.addr, node->full_name); > diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c > index d35e300..9064b76 100644 > --- a/drivers/of/of_mdio.c > +++ b/drivers/of/of_mdio.c > @@ -52,19 +52,17 @@ int of_mdiobus_register(struct mii_bus *mdio, > struct device_node *np) > > /* Loop over the child nodes and register a phy_device for each one */ > for_each_child_of_node(np, child) { > - const __be32 *paddr; > + u32 paddr; > u32 addr; > - int len; > > /* A PHY must have a reg property in the range [0-31] */ > - paddr = of_get_property(child, "reg", &len); > - if (!paddr || len < sizeof(*paddr)) { > + if (of_property_read_u32(child, "reg", &paddr)) { > dev_err(&mdio->dev, "%s has invalid PHY address\n", > child->full_name); > continue; > } > > - addr = be32_to_cpup(paddr); > + addr = paddr; > if (addr >= 32) { > dev_err(&mdio->dev, "%s PHY address %i is too large\n", > child->full_name, addr); > -- > 1.7.4.1 >
diff --git a/drivers/of/irq.c b/drivers/of/irq.c index 9f689f1..30cd3b7 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -59,20 +59,19 @@ EXPORT_SYMBOL_GPL(irq_of_parse_and_map); struct device_node *of_irq_find_parent(struct device_node *child) { struct device_node *p; - const __be32 *parp; + u32 parp; if (!of_node_get(child)) return NULL; do { - parp = of_get_property(child, "interrupt-parent", NULL); - if (parp == NULL) + if (of_property_read_u32(child, "interrupt-parent", &parp)) p = of_get_parent(child); else { if (of_irq_workarounds & OF_IMAP_NO_PHANDLE) p = of_node_get(of_irq_dflt_pic); else - p = of_find_node_by_phandle(be32_to_cpup(parp)); + p = of_find_node_by_phandle(parp); } of_node_put(child); child = p; @@ -100,7 +99,8 @@ int of_irq_map_raw(struct device_node *parent, const __be32 *intspec, u32 ointsize, const __be32 *addr, struct of_irq *out_irq) { struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL; - const __be32 *tmp, *imap, *imask; + const __be32 *imap, *imask; + u32 tmp; u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0; int imaplen, match, i; @@ -115,9 +115,8 @@ int of_irq_map_raw(struct device_node *parent, const __be32 *intspec, * is none, we are nice and just walk up the tree */ do { - tmp = of_get_property(ipar, "#interrupt-cells", NULL); - if (tmp != NULL) { - intsize = be32_to_cpu(*tmp); + if (!of_property_read_u32(ipar, "#interrupt-cells", &tmp)) { + intsize = tmp; break; } tnode = ipar; @@ -139,14 +138,14 @@ int of_irq_map_raw(struct device_node *parent, const __be32 *intspec, */ old = of_node_get(ipar); do { - tmp = of_get_property(old, "#address-cells", NULL); + i = of_property_read_u32(old, "#address-cells", &tmp); tnode = of_get_parent(old); of_node_put(old); old = tnode; - } while (old && tmp == NULL); + } while (old && i < 0); of_node_put(old); old = NULL; - addrsize = (tmp == NULL) ? 2 : be32_to_cpu(*tmp); + addrsize = (i < 0) ? 2 : tmp; pr_debug(" -> addrsize=%d\n", addrsize); @@ -225,14 +224,14 @@ int of_irq_map_raw(struct device_node *parent, const __be32 *intspec, /* Get #interrupt-cells and #address-cells of new * parent */ - tmp = of_get_property(newpar, "#interrupt-cells", NULL); - if (tmp == NULL) { + if (of_property_read_u32(newpar, "#interrupt-cells", + &tmp)) { pr_debug(" -> parent lacks #interrupt-cells!\n"); goto fail; } - newintsize = be32_to_cpu(*tmp); - tmp = of_get_property(newpar, "#address-cells", NULL); - newaddrsize = (tmp == NULL) ? 0 : be32_to_cpu(*tmp); + newintsize = tmp; + i = of_property_read_u32(newpar, "#address-cells", &tmp); + newaddrsize = (i < 0) ? 0 : tmp; pr_debug(" -> newintsize=%d, newaddrsize=%d\n", newintsize, newaddrsize); @@ -284,7 +283,8 @@ EXPORT_SYMBOL_GPL(of_irq_map_raw); int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq) { struct device_node *p; - const __be32 *intspec, *tmp, *addr; + const __be32 *intspec, *addr; + u32 tmp; u32 intsize, intlen; int res = -EINVAL; @@ -311,10 +311,9 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq return -EINVAL; /* Get size of interrupt specifier */ - tmp = of_get_property(p, "#interrupt-cells", NULL); - if (tmp == NULL) + if (of_property_read_u32(p, "#interrupt-cells", &tmp)) goto out; - intsize = be32_to_cpu(*tmp); + intsize = tmp; pr_debug(" intsize=%d intlen=%d\n", intsize, intlen); diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c index f37fbeb..371b591 100644 --- a/drivers/of/of_i2c.c +++ b/drivers/of/of_i2c.c @@ -32,8 +32,7 @@ void of_i2c_register_devices(struct i2c_adapter *adap) for_each_child_of_node(adap->dev.of_node, node) { struct i2c_board_info info = {}; struct dev_archdata dev_ad = {}; - const __be32 *addr; - int len; + u32 addr; dev_dbg(&adap->dev, "of_i2c: register %s\n", node->full_name); @@ -43,14 +42,13 @@ void of_i2c_register_devices(struct i2c_adapter *adap) continue; } - addr = of_get_property(node, "reg", &len); - if (!addr || (len < sizeof(int))) { + if (of_property_read_u32(node, "reg", &addr)) { dev_err(&adap->dev, "of_i2c: invalid reg on %s\n", node->full_name); continue; } - info.addr = be32_to_cpup(addr); + info.addr = addr; if (info.addr > (1 << 10) - 1) { dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n", info.addr, node->full_name); diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index d35e300..9064b76 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -52,19 +52,17 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) /* Loop over the child nodes and register a phy_device for each one */ for_each_child_of_node(np, child) { - const __be32 *paddr; + u32 paddr; u32 addr; - int len; /* A PHY must have a reg property in the range [0-31] */ - paddr = of_get_property(child, "reg", &len); - if (!paddr || len < sizeof(*paddr)) { + if (of_property_read_u32(child, "reg", &paddr)) { dev_err(&mdio->dev, "%s has invalid PHY address\n", child->full_name); continue; } - addr = be32_to_cpup(paddr); + addr = paddr; if (addr >= 32) { dev_err(&mdio->dev, "%s PHY address %i is too large\n",
Use helper function of_property_read_u32() in place of of_get_property and be32_to_cpup() api's for code optimization. Compile tested the changes. Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> --- drivers/of/irq.c | 39 +++++++++++++++++++-------------------- drivers/of/of_i2c.c | 8 +++----- drivers/of/of_mdio.c | 8 +++----- 3 files changed, 25 insertions(+), 30 deletions(-) child->full_name, addr);