diff mbox

arm: dts: ls1021a: fix the value of TMR_FIPER1

Message ID DB6PR0401MB2536A92B16A744BB51BA0197F8260@DB6PR0401MB2536.eurprd04.prod.outlook.com (mailing list archive)
State New, archived
Headers show

Commit Message

Yangbo Lu Nov. 24, 2017, 2:31 a.m. UTC
Any comments?

+Shawn

Thanks.

-----Original Message-----
From: Yangbo Lu [mailto:yangbo.lu@nxp.com] 

Sent: 2017年11月10日 9:59
To: devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; Rob Herring <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>; Russell King <linux@armlinux.org.uk>
Cc: Y.b. Lu <yangbo.lu@nxp.com>
Subject: [PATCH] arm: dts: ls1021a: fix the value of TMR_FIPER1

The timer fixed interval period pulse generator register is used to generate periodic pulses. The down count register loads the value programmed in the fixed period interval (FIPER). At every tick of the timer accumulator overflow, the counter decrements by the value of TMR_CTRL[TCLK_PERIOD]. It generates a pulse when the down counter value reaches zero. It reloads the down counter in the cycle following a pulse. To use the TMR_FIPER1 register to generate a 1 PPS event, the value
(10^9 nanoseconds) - TCLK_PERIOD should be programmed.
It should be 999999995 not 999999990 since TCLK_PERIOD is 5.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>

---
 arch/arm/boot/dts/ls1021a.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--
2.14.1

Comments

Shawn Guo Nov. 29, 2017, 6:55 a.m. UTC | #1
On Fri, Nov 24, 2017 at 02:31:13AM +0000, Y.b. Lu wrote:
> Any comments?
> 
> +Shawn

Please resend with me on copy.

> 
> Thanks.
> 
> -----Original Message-----
> From: Yangbo Lu [mailto:yangbo.lu@nxp.com] 
> Sent: 2017年11月10日 9:59
> To: devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; Rob Herring <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>; Russell King <linux@armlinux.org.uk>
> Cc: Y.b. Lu <yangbo.lu@nxp.com>
> Subject: [PATCH] arm: dts: ls1021a: fix the value of TMR_FIPER1

ARM: dts: ...

> 
> The timer fixed interval period pulse generator register is used to generate periodic pulses. The down count register loads the value programmed in the fixed period interval (FIPER). At every tick of the timer accumulator overflow, the counter decrements by the value of TMR_CTRL[TCLK_PERIOD]. It generates a pulse when the down counter value reaches zero. It reloads the down counter in the cycle following a pulse. To use the TMR_FIPER1 register to generate a 1 PPS event, the value

Please wrap the commit log properly.

Shawn

> (10^9 nanoseconds) - TCLK_PERIOD should be programmed.
> It should be 999999995 not 999999990 since TCLK_PERIOD is 5.
> 
> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
> ---
>  arch/arm/boot/dts/ls1021a.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 9319e1f0f1d8..10e536f338f7 100644
> --- a/arch/arm/boot/dts/ls1021a.dtsi
> +++ b/arch/arm/boot/dts/ls1021a.dtsi
> @@ -575,7 +575,7 @@
>  			fsl,tclk-period = <5>;
>  			fsl,tmr-prsc    = <2>;
>  			fsl,tmr-add     = <0xaaaaaaab>;
> -			fsl,tmr-fiper1  = <999999990>;
> +			fsl,tmr-fiper1  = <999999995>;
>  			fsl,tmr-fiper2  = <99990>;
>  			fsl,max-adj     = <499999999>;
>  		};
> --
> 2.14.1
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff mbox

Patch

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 9319e1f0f1d8..10e536f338f7 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -575,7 +575,7 @@ 
 			fsl,tclk-period = <5>;
 			fsl,tmr-prsc    = <2>;
 			fsl,tmr-add     = <0xaaaaaaab>;
-			fsl,tmr-fiper1  = <999999990>;
+			fsl,tmr-fiper1  = <999999995>;
 			fsl,tmr-fiper2  = <99990>;
 			fsl,max-adj     = <499999999>;
 		};