@@ -22,8 +22,8 @@ struct pxa_cpu_pm_fns {
extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
/* sleep.S */
-extern void pxa25x_cpu_suspend(unsigned int, long);
-extern void pxa27x_cpu_suspend(unsigned int, long);
+extern void pxa25x_finish_suspend(unsigned long);
+extern void pxa27x_finish_suspend(unsigned long);
extern int pxa_pm_enter(suspend_state_t state);
extern int pxa_pm_prepare(void);
@@ -244,7 +244,8 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state)
switch (state) {
case PM_SUSPEND_MEM:
- pxa25x_cpu_suspend(PWRMODE_SLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET);
+ cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, PWRMODE_SLEEP,
+ pxa25x_finish_suspend);
break;
}
}
@@ -284,6 +284,11 @@ void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
void pxa27x_cpu_pm_enter(suspend_state_t state)
{
extern void pxa_cpu_standby(void);
+#ifndef CONFIG_IWMMXT
+ u64 acc0;
+
+ asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
+#endif
/* ensure voltage-change sequencer not initiated, which hangs */
PCFR &= ~PCFR_FVC;
@@ -299,7 +304,11 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
pxa_cpu_standby();
break;
case PM_SUSPEND_MEM:
- pxa27x_cpu_suspend(pwrmode, PLAT_PHYS_OFFSET - PAGE_OFFSET);
+ cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, pwrmode,
+ pxa27x_finish_suspend);
+#ifndef CONFIG_IWMMXT
+ asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
+#endif
break;
}
}
@@ -141,8 +141,13 @@ static void pxa3xx_cpu_pm_suspend(void)
{
volatile unsigned long *p = (volatile void *)0xc0000000;
unsigned long saved_data = *p;
+#ifndef CONFIG_IWMMXT
+ u64 acc0;
- extern void pxa3xx_cpu_suspend(long);
+ asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
+#endif
+
+ extern void pxa3xx_finish_suspend(unsigned long);
/* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM);
@@ -162,11 +167,15 @@ static void pxa3xx_cpu_pm_suspend(void)
/* overwrite with the resume address */
*p = virt_to_phys(cpu_resume);
- pxa3xx_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET);
+ cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, 0, pxa3xx_finish_suspend);
*p = saved_data;
AD3ER = 0;
+
+#ifndef CONFIG_IWMMXT
+ asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
+#endif
}
static void pxa3xx_cpu_pm_enter(suspend_state_t state)
@@ -24,22 +24,9 @@
#ifdef CONFIG_PXA3xx
/*
- * pxa3xx_cpu_suspend() - forces CPU into sleep state (S2D3C4)
- *
- * r0 = v:p offset
+ * pxa3xx_finish_suspend() - forces CPU into sleep state (S2D3C4)
*/
-ENTRY(pxa3xx_cpu_suspend)
-
-#ifndef CONFIG_IWMMXT
- mra r2, r3, acc0
-#endif
- stmfd sp!, {r2 - r12, lr} @ save registers on stack
- mov r1, r0
- adr r3, BSYM(pxa3xx_finish_suspend)
- bl cpu_suspend
- b pxa_cpu_resume
-
-pxa3xx_finish_suspend:
+ENTRY(pxa3xx_finish_suspend)
mov r0, #0x06 @ S2D3C4 mode
mcr p14, 0, r0, c7, c0, 0 @ enter sleep
@@ -48,25 +35,13 @@ pxa3xx_finish_suspend:
#ifdef CONFIG_PXA27x
/*
- * pxa27x_cpu_suspend()
+ * pxa27x_finish_suspend()
*
* Forces CPU into sleep state.
*
* r0 = value for PWRMODE M field for desired sleep state
- * r1 = v:p offset
*/
-ENTRY(pxa27x_cpu_suspend)
-
-#ifndef CONFIG_IWMMXT
- mra r2, r3, acc0
-#endif
- stmfd sp!, {r2 - r12, lr} @ save registers on stack
- mov r2, r0 @ save sleep mode
- adr r3, BSYM(pxa27x_finish_suspend)
- bl cpu_suspend
- b pxa_cpu_resume
-
-pxa27x_finish_suspend:
+ENTRY(pxa27x_finish_suspend)
@ Put the processor to sleep
@ (also workaround for sighting 28071)
@@ -103,22 +78,14 @@ pxa27x_finish_suspend:
#ifdef CONFIG_PXA25x
/*
- * pxa25x_cpu_suspend()
+ * pxa25x_finish_suspend()
*
* Forces CPU into sleep state.
*
* r0 = value for PWRMODE M field for desired sleep state
- * r1 = v:p offset
*/
-ENTRY(pxa25x_cpu_suspend)
- stmfd sp!, {r2 - r12, lr} @ save registers on stack
- mov r2, r0 @ save sleep mode
- adr r3, BSYM(pxa25x_finish_suspend)
- bl cpu_suspend
- b pxa_cpu_resume
-
-pxa25x_finish_suspend:
+ENTRY(pxa25x_finish_suspend)
@ prepare value for sleep mode
mov r1, r0 @ sleep mode
@@ -202,16 +169,3 @@ pxa_cpu_do_suspend:
mcr p14, 0, r1, c7, c0, 0 @ PWRMODE
20: b 20b @ loop waiting for sleep
-
-/*
- * pxa_cpu_resume()
- *
- * entry point from bootloader into kernel during resume
- */
- .align 5
-pxa_cpu_resume:
- ldmfd sp!, {r2, r3}
-#ifndef CONFIG_IWMMXT
- mar acc0, r2, r3
-#endif
- ldmfd sp!, {r4 - r12, pc} @ return to caller
@@ -676,7 +676,8 @@ static struct pxa2xx_udc_mach_info zeus_udc_info = {
static void zeus_power_off(void)
{
local_irq_disable();
- pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET);
+ cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, PWRMODE_DEEPSLEEP,
+ pxa27x_finish_suspend);
}
#else
#define zeus_power_off NULL
We don't need a veneer for cpu_suspend, it can be called directly from C code now. Move it into the PXA CPU suspend functions, along with the accumulator register saving/restoring. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/mach-pxa/include/mach/pm.h | 4 +- arch/arm/mach-pxa/pxa25x.c | 3 +- arch/arm/mach-pxa/pxa27x.c | 11 ++++++- arch/arm/mach-pxa/pxa3xx.c | 13 ++++++- arch/arm/mach-pxa/sleep.S | 58 +++------------------------------- arch/arm/mach-pxa/zeus.c | 3 +- 6 files changed, 33 insertions(+), 59 deletions(-)