@@ -60,6 +60,7 @@
@
@ Call the processor-specific abort handler:
@
+ @ r2 - pt_regs
@ r4 - aborted context pc
@ r5 - aborted context psr
@
@@ -186,13 +187,8 @@ ENDPROC(__und_invalid)
.align 5
__dabt_svc:
svc_entry
- dabt_helper
-
- @
- @ call main handler
- @
mov r2, sp
- bl do_DataAbort
+ dabt_helper
@
@ IRQs off again before pulling preserved data off the stack
@@ -407,11 +403,9 @@ ENDPROC(__pabt_svc)
__dabt_usr:
usr_entry
kuser_cmpxchg_check
- dabt_helper
-
mov r2, sp
- adr lr, BSYM(ret_from_exception)
- b do_DataAbort
+ dabt_helper
+ b ret_from_exception
UNWIND(.fnend )
ENDPROC(__dabt_usr)
@@ -3,14 +3,11 @@
/*
* Function: v4_early_abort
*
- * Params : r4 = aborted context pc
+ * Params : r2 = pt_regs
+ * : r4 = aborted context pc
* : r5 = aborted context psr
*
- * Returns : r0 = address of abort
- * : r1 = FSR, bit 11 = write
- * : r2-r8 = corrupted
- * : r9 = preserved
- * : sp = pointer to registers
+ * Returns : r4 - r11, r13 preserved
*
* Purpose : obtain information about current aborted instruction.
* Note: we read user space. This means we might cause a data
@@ -25,4 +22,4 @@ ENTRY(v4_early_abort)
bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR
tst r3, #1 << 20 @ L = 1 -> write?
orreq r1, r1, #1 << 11 @ yes.
- mov pc, lr
+ b do_DataAbort
@@ -4,14 +4,11 @@
/*
* Function: v4t_early_abort
*
- * Params : r4 = aborted context pc
+ * Params : r2 = pt_regs
+ * : r4 = aborted context pc
* : r5 = aborted context psr
*
- * Returns : r0 = address of abort
- * : r1 = FSR, bit 11 = write
- * : r2-r8 = corrupted
- * : r9 = preserved
- * : sp = pointer to registers
+ * Returns : r4 - r11, r13 preserved
*
* Purpose : obtain information about current aborted instruction.
* Note: we read user space. This means we might cause a data
@@ -27,4 +24,4 @@ ENTRY(v4t_early_abort)
bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR
tst r3, #1 << 20 @ check write
orreq r1, r1, #1 << 11
- mov pc, lr
+ b do_DataAbort
@@ -4,14 +4,11 @@
/*
* Function: v5t_early_abort
*
- * Params : r4 = aborted context pc
+ * Params : r2 = pt_regs
+ * : r4 = aborted context pc
* : r5 = aborted context psr
*
- * Returns : r0 = address of abort
- * : r1 = FSR, bit 11 = write
- * : r2-r8 = corrupted
- * : r9 = preserved
- * : sp = pointer to registers
+ * Returns : r4 - r11, r13 preserved
*
* Purpose : obtain information about current aborted instruction.
* Note: we read user space. This means we might cause a data
@@ -28,4 +25,4 @@ ENTRY(v5t_early_abort)
do_ldrd_abort tmp=ip, insn=r3
tst r3, #1 << 20 @ check write
orreq r1, r1, #1 << 11
- mov pc, lr
+ b do_DataAbort
@@ -4,14 +4,11 @@
/*
* Function: v5tj_early_abort
*
- * Params : r4 = aborted context pc
+ * Params : r2 = pt_regs
+ * : r4 = aborted context pc
* : r5 = aborted context psr
*
- * Returns : r0 = address of abort
- * : r1 = FSR, bit 11 = write
- * : r2-r8 = corrupted
- * : r9 = preserved
- * : sp = pointer to registers
+ * Returns : r4 - r11, r13 preserved
*
* Purpose : obtain information about current aborted instruction.
* Note: we read user space. This means we might cause a data
@@ -24,10 +21,10 @@ ENTRY(v5tj_early_abort)
mrc p15, 0, r0, c6, c0, 0 @ get FAR
bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR
tst r5, #PSR_J_BIT @ Java?
- movne pc, lr
+ bne do_DataAbort
do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3
ldreq r3, [r4] @ read aborted ARM instruction
do_ldrd_abort tmp=ip, insn=r3
tst r3, #1 << 20 @ L = 0 -> write
orreq r1, r1, #1 << 11 @ yes.
- mov pc, lr
+ b do_DataAbort
@@ -4,14 +4,11 @@
/*
* Function: v6_early_abort
*
- * Params : r4 = aborted context pc
+ * Params : r2 = pt_regs
+ * : r4 = aborted context pc
* : r5 = aborted context psr
*
- * Returns : r0 = address of abort
- * : r1 = FSR, bit 11 = write
- * : r2-r8 = corrupted
- * : r9 = preserved
- * : sp = pointer to registers
+ * Returns : r4 - r11, r13 preserved
*
* Purpose : obtain information about current aborted instruction.
* Note: we read user space. This means we might cause a data
@@ -34,7 +31,7 @@ ENTRY(v6_early_abort)
*/
bic r1, r1, #1 << 11 @ clear bit 11 of FSR
tst r5, #PSR_J_BIT @ Java?
- movne pc, lr
+ bne do_DataAbort
do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3
ldreq r3, [r4] @ read aborted ARM instruction
#ifdef CONFIG_CPU_ENDIAN_BE8
@@ -43,4 +40,4 @@ ENTRY(v6_early_abort)
do_ldrd_abort tmp=ip, insn=r3
tst r3, #1 << 20 @ L = 0 -> write
orreq r1, r1, #1 << 11 @ yes.
- mov pc, lr
+ b do_DataAbort
@@ -3,14 +3,11 @@
/*
* Function: v7_early_abort
*
- * Params : r4 = aborted context pc
+ * Params : r2 = pt_regs
+ * : r4 = aborted context pc
* : r5 = aborted context psr
*
- * Returns : r0 = address of abort
- * : r1 = FSR, bit 11 = write
- * : r2-r8 = corrupted
- * : r9 = preserved
- * : sp = pointer to registers
+ * Returns : r4 - r11, r13 preserved
*
* Purpose : obtain information about current aborted instruction.
*/
@@ -37,18 +34,18 @@ ENTRY(v7_early_abort)
ldr r3, =0x40d @ On permission fault
and r3, r1, r3
cmp r3, #0x0d
- movne pc, lr
+ bne do_DataAbort
mcr p15, 0, r0, c7, c8, 0 @ Retranslate FAR
isb
mrc p15, 0, ip, c7, c4, 0 @ Read the PAR
and r3, ip, #0x7b @ On translation fault
cmp r3, #0x0b
- movne pc, lr
+ bne do_DataAbort
bic r1, r1, #0xf @ Fix up FSR FS[5:0]
and ip, ip, #0x7e
orr r1, r1, ip, LSR #1
#endif
- mov pc, lr
+ b do_DataAbort
ENDPROC(v7_early_abort)
@@ -3,7 +3,8 @@
/*
* Function: v4t_late_abort
*
- * Params : r4 = aborted context pc
+ * Params : r2 = pt_regs
+ * : r4 = aborted context pc
* : r5 = aborted context psr
*
* Returns : r0 = address of abort
@@ -47,20 +48,18 @@ ENTRY(v4t_late_abort)
/* 9 */ b .data_arm_ldmstm @ ldm*b rn, <rlist>
/* a */ b .data_unknown
/* b */ b .data_unknown
-/* c */ mov pc, lr @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m
-/* d */ mov pc, lr @ ldc rd, [rn, #m]
+/* c */ b do_DataAbort @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m
+/* d */ b do_DataAbort @ ldc rd, [rn, #m]
/* e */ b .data_unknown
/* f */
.data_unknown: @ Part of jumptable
mov r0, r4
mov r1, r8
- mov r2, sp
- bl baddataabort
- b ret_from_exception
+ b baddataabort
.data_arm_ldmstm:
tst r8, #1 << 21 @ check writeback bit
- moveq pc, lr @ no writeback -> no fixup
+ beq do_DataAbort @ no writeback -> no fixup
mov r7, #0x11
orr r7, r7, #0x1100
and r6, r8, r7
@@ -79,11 +78,11 @@ ENTRY(v4t_late_abort)
subne r7, r7, r6, lsl #2 @ Undo increment
addeq r7, r7, r6, lsl #2 @ Undo decrement
str r7, [sp, r5, lsr #14] @ Put register 'Rn'
- mov pc, lr
+ b do_DataAbort
.data_arm_lateldrhpre:
tst r8, #1 << 21 @ Check writeback bit
- moveq pc, lr @ No writeback -> no fixup
+ beq do_DataAbort @ No writeback -> no fixup
.data_arm_lateldrhpost:
and r5, r8, #0x00f @ get Rm / low nibble of immediate value
tst r8, #1 << 22 @ if (immediate offset)
@@ -97,25 +96,25 @@ ENTRY(v4t_late_abort)
subne r7, r7, r6 @ Undo incrmenet
addeq r7, r7, r6 @ Undo decrement
str r7, [sp, r5, lsr #14] @ Put register 'Rn'
- mov pc, lr
+ b do_DataAbort
.data_arm_lateldrpreconst:
tst r8, #1 << 21 @ check writeback bit
- moveq pc, lr @ no writeback -> no fixup
+ beq do_DataAbort @ no writeback -> no fixup
.data_arm_lateldrpostconst:
movs r9, r8, lsl #20 @ Get offset
- moveq pc, lr @ zero -> no fixup
+ beq do_DataAbort @ zero -> no fixup
and r5, r8, #15 << 16 @ Extract 'n' from instruction
ldr r7, [sp, r5, lsr #14] @ Get register 'Rn'
tst r8, #1 << 23 @ Check U bit
subne r7, r7, r9, lsr #20 @ Undo increment
addeq r7, r7, r9, lsr #20 @ Undo decrement
str r7, [sp, r5, lsr #14] @ Put register 'Rn'
- mov pc, lr
+ b do_DataAbort
.data_arm_lateldrprereg:
tst r8, #1 << 21 @ check writeback bit
- moveq pc, lr @ no writeback -> no fixup
+ beq do_DataAbort @ no writeback -> no fixup
.data_arm_lateldrpostreg:
and r7, r8, #15 @ Extract 'm' from instruction
ldr r6, [sp, r7, lsl #2] @ Get register 'Rm'
@@ -172,10 +171,10 @@ ENTRY(v4t_late_abort)
/* 3 */ b .data_unknown
/* 4 */ b .data_unknown
/* 5 */ b .data_thumb_reg
-/* 6 */ mov pc, lr
-/* 7 */ mov pc, lr
-/* 8 */ mov pc, lr
-/* 9 */ mov pc, lr
+/* 6 */ b do_DataAbort
+/* 7 */ b do_DataAbort
+/* 8 */ b do_DataAbort
+/* 9 */ b do_DataAbort
/* A */ b .data_unknown
/* B */ b .data_thumb_pushpop
/* C */ b .data_thumb_ldmstm
@@ -185,10 +184,10 @@ ENTRY(v4t_late_abort)
.data_thumb_reg:
tst r8, #1 << 9
- moveq pc, lr
+ beq do_DataAbort
tst r8, #1 << 10 @ If 'S' (signed) bit is set
movne r1, #0 @ it must be a load instr
- mov pc, lr
+ b do_DataAbort
.data_thumb_pushpop:
tst r8, #1 << 10
@@ -207,7 +206,7 @@ ENTRY(v4t_late_abort)
addeq r7, r7, r6, lsl #2 @ increment SP if PUSH
subne r7, r7, r6, lsl #2 @ decrement SP if POP
str r7, [sp, #13 << 2]
- mov pc, lr
+ b do_DataAbort
.data_thumb_ldmstm:
and r6, r8, #0x55 @ hweight8(r8)
@@ -222,4 +221,4 @@ ENTRY(v4t_late_abort)
and r6, r6, #15 @ number of regs to transfer
sub r7, r7, r6, lsl #2 @ always decrement
str r7, [sp, r5, lsr #6]
- mov pc, lr
+ b do_DataAbort
@@ -18,7 +18,7 @@
orreq \tmp, \tmp, #1 << 11 @ Set L-bit if yes
tst \tmp, #1 << 11 @ L = 0 -> write
orreq \psr, \psr, #1 << 11 @ yes.
- mov pc, lr
+ b do_DataAbort
not_thumb:
.endm
@@ -34,7 +34,7 @@ not_thumb:
bne not_ldrd
and \tmp, \insn, #0x000000f0 @ [7:4] == 1101
cmp \tmp, #0x000000d0
- moveq pc, lr
+ beq do_DataAbort
not_ldrd:
.endm
@@ -3,11 +3,11 @@
/*
* Function: nommu_early_abort
*
- * Params : r4 = aborted context pc
+ * Params : r2 = pt_regs
+ * : r4 = aborted context pc
* : r5 = aborted context psr
*
- * Returns : r0 = 0 (abort address)
- * : r1 = 0 (FSR)
+ * Returns : r4 - r11, r13 preserved
*
* Note: There is no FSR/FAR on !CPU_CP15_MMU cores.
* Just fill zero into the registers.
@@ -16,5 +16,5 @@
ENTRY(nommu_early_abort)
mov r0, #0 @ clear r0, r1 (no FSR/FAR)
mov r1, #0
- mov pc, lr
+ b do_DataAbort
ENDPROC(nommu_early_abort)
@@ -29,7 +29,8 @@ ENTRY(cpu_arm7_dcache_clean_area)
/*
* Function: arm6_7_data_abort ()
*
- * Params : r4 = aborted context pc
+ * Params : r2 = pt_regs
+ * : r4 = aborted context pc
* : r5 = aborted context psr
*
* Purpose : obtain information about current aborted instruction
@@ -49,7 +50,7 @@ ENTRY(cpu_arm7_data_abort)
nop
/* 0 */ b .data_unknown
-/* 1 */ mov pc, lr @ swp
+/* 1 */ b do_DataAbort @ swp
/* 2 */ b .data_unknown
/* 3 */ b .data_unknown
/* 4 */ b .data_arm_lateldrpostconst @ ldr rd, [rn], #m
@@ -60,16 +61,14 @@ ENTRY(cpu_arm7_data_abort)
/* 9 */ b .data_arm_ldmstm @ ldm*b rn, <rlist>
/* a */ b .data_unknown
/* b */ b .data_unknown
-/* c */ mov pc, lr @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m
-/* d */ mov pc, lr @ ldc rd, [rn, #m]
+/* c */ b do_DataAbort @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m
+/* d */ b do_DataAbort @ ldc rd, [rn, #m]
/* e */ b .data_unknown
/* f */
.data_unknown: @ Part of jumptable
mov r0, r4
mov r1, r8
- mov r2, sp
- bl baddataabort
- b ret_from_exception
+ b baddataabort
ENTRY(cpu_arm6_data_abort)
mrc p15, 0, r1, c5, c0, 0 @ get FSR
@@ -79,11 +78,11 @@ ENTRY(cpu_arm6_data_abort)
orreq r1, r1, #1 << 11 @ yes.
and r7, r8, #14 << 24
teq r7, #8 << 24 @ was it ldm/stm
- movne pc, lr
+ bne do_DataAbort
.data_arm_ldmstm:
tst r8, #1 << 21 @ check writeback bit
- moveq pc, lr @ no writeback -> no fixup
+ beq do_DataAbort @ no writeback -> no fixup
mov r7, #0x11
orr r7, r7, #0x1100
and r6, r8, r7
@@ -102,7 +101,7 @@ ENTRY(cpu_arm6_data_abort)
subne r7, r7, r6, lsl #2 @ Undo increment
addeq r7, r7, r6, lsl #2 @ Undo decrement
str r7, [sp, r5, lsr #14] @ Put register 'Rn'
- mov pc, lr
+ b do_DataAbort
.data_arm_apply_r6_and_rn:
and r5, r8, #15 << 16 @ Extract 'n' from instruction
@@ -111,25 +110,25 @@ ENTRY(cpu_arm6_data_abort)
subne r7, r7, r6 @ Undo incrmenet
addeq r7, r7, r6 @ Undo decrement
str r7, [sp, r5, lsr #14] @ Put register 'Rn'
- mov pc, lr
+ b do_DataAbort
.data_arm_lateldrpreconst:
tst r8, #1 << 21 @ check writeback bit
- moveq pc, lr @ no writeback -> no fixup
+ beq do_DataAbort @ no writeback -> no fixup
.data_arm_lateldrpostconst:
movs r9, r8, lsl #20 @ Get offset
- moveq pc, lr @ zero -> no fixup
+ beq do_DataAbort @ zero -> no fixup
and r5, r8, #15 << 16 @ Extract 'n' from instruction
ldr r7, [sp, r5, lsr #14] @ Get register 'Rn'
tst r8, #1 << 23 @ Check U bit
subne r7, r7, r9, lsr #20 @ Undo increment
addeq r7, r7, r9, lsr #20 @ Undo decrement
str r7, [sp, r5, lsr #14] @ Put register 'Rn'
- mov pc, lr
+ b do_DataAbort
.data_arm_lateldrprereg:
tst r8, #1 << 21 @ check writeback bit
- moveq pc, lr @ no writeback -> no fixup
+ beq do_DataAbort @ no writeback -> no fixup
.data_arm_lateldrpostreg:
and r7, r8, #15 @ Extract 'm' from instruction
ldr r6, [sp, r7, lsl #2] @ Get register 'Rm'
Tail-call the main C data abort handler code from the per-CPU helper code. Update the comments in the code wrt the new calling and return register state. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/kernel/entry-armv.S | 14 +++--------- arch/arm/mm/abort-ev4.S | 11 +++------ arch/arm/mm/abort-ev4t.S | 11 +++------ arch/arm/mm/abort-ev5t.S | 11 +++------ arch/arm/mm/abort-ev5tj.S | 13 ++++------- arch/arm/mm/abort-ev6.S | 13 ++++------- arch/arm/mm/abort-ev7.S | 15 +++++-------- arch/arm/mm/abort-lv4t.S | 43 ++++++++++++++++++++--------------------- arch/arm/mm/abort-macro.S | 4 +- arch/arm/mm/abort-nommu.S | 8 +++--- arch/arm/mm/proc-arm6_7.S | 29 +++++++++++++-------------- 11 files changed, 73 insertions(+), 99 deletions(-)