@@ -36,23 +36,18 @@ static void mtk_pcs_get_state(struct phylink_pcs *pcs,
/* For SGMII interface mode */
static void mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs)
{
- unsigned int val;
-
/* Setup the link timer and QPHY power up inside SGMIISYS */
regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER,
SGMII_LINK_TIMER_DEFAULT);
- regmap_read(mpcs->regmap, SGMSYS_SGMII_MODE, &val);
- val |= SGMII_REMOTE_FAULT_DIS;
- regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val);
+ regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
+ SGMII_REMOTE_FAULT_DIS, SGMII_REMOTE_FAULT_DIS);
- regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &val);
- val |= SGMII_AN_RESTART;
- regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val);
+ regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
+ SGMII_AN_RESTART, SGMII_AN_RESTART);
- regmap_read(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, &val);
- val &= ~SGMII_PHYA_PWD;
- regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, val);
+ regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
+ SGMII_PHYA_PWD, 0);
}
/* For 1000BASE-X and 2500BASE-X interface modes, which operate at a
@@ -61,29 +56,26 @@ static void mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs)
static void mtk_pcs_setup_mode_force(struct mtk_pcs *mpcs,
phy_interface_t interface)
{
- unsigned int val;
+ unsigned int rgc3;
- regmap_read(mpcs->regmap, mpcs->ana_rgc3, &val);
- val &= ~RG_PHY_SPEED_MASK;
if (interface == PHY_INTERFACE_MODE_2500BASEX)
- val |= RG_PHY_SPEED_3_125G;
- regmap_write(mpcs->regmap, mpcs->ana_rgc3, val);
+ rgc3 = RG_PHY_SPEED_3_125G;
+
+ regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
+ RG_PHY_SPEED_3_125G, rgc3);
/* Disable SGMII AN */
- regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &val);
- val &= ~SGMII_AN_ENABLE;
- regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val);
+ regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
+ SGMII_AN_ENABLE, 0);
/* Set the speed etc but leave the duplex unchanged */
- regmap_read(mpcs->regmap, SGMSYS_SGMII_MODE, &val);
- val &= SGMII_DUPLEX_FULL | ~SGMII_IF_MODE_MASK;
- val |= SGMII_SPEED_1000;
- regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val);
+ regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
+ SGMII_IF_MODE_MASK & ~SGMII_DUPLEX_FULL,
+ SGMII_SPEED_1000);
/* Release PHYA power down state */
- regmap_read(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, &val);
- val &= ~SGMII_PHYA_PWD;
- regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, val);
+ regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
+ SGMII_PHYA_PWD, 0);
}
static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
@@ -105,29 +97,28 @@ static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
static void mtk_pcs_restart_an(struct phylink_pcs *pcs)
{
struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
- unsigned int val;
- regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &val);
- val |= SGMII_AN_RESTART;
- regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val);
+ regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
+ SGMII_AN_RESTART, SGMII_AN_RESTART);
}
static void mtk_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
phy_interface_t interface, int speed, int duplex)
{
struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
- unsigned int val;
+ unsigned int sgm_mode;
if (!phy_interface_mode_is_8023z(interface))
return;
/* SGMII force duplex setting */
- regmap_read(mpcs->regmap, SGMSYS_SGMII_MODE, &val);
- val &= ~SGMII_DUPLEX_FULL;
if (duplex == DUPLEX_FULL)
- val |= SGMII_DUPLEX_FULL;
+ sgm_mode = SGMII_DUPLEX_FULL;
+ else
+ sgm_mode = 0;
- regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val);
+ regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
+ SGMII_DUPLEX_FULL, sgm_mode);
}
static const struct phylink_pcs_ops mtk_pcs_ops = {
mtk_sgmii does a lot of read-modify-write operations, for which there is a specific regmap function. Use this function instead of open-coding the operations. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> --- drivers/net/ethernet/mediatek/mtk_sgmii.c | 61 ++++++++++------------- 1 file changed, 26 insertions(+), 35 deletions(-)