diff mbox series

[net-next,05/10] net: stmmac: use phylink_limit_mac_speed()

Message ID E1qZAXO-005pU7-61@rmk-PC.armlinux.org.uk (mailing list archive)
State New, archived
Headers show
Series stmmac cleanups | expand

Commit Message

Russell King (Oracle) Aug. 24, 2023, 1:38 p.m. UTC 
Use phylink_limit_mac_speed() to limit the MAC capabilities rather
than coding this for each speed.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 35 ++++++++-----------
 1 file changed, 14 insertions(+), 21 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index fe733a9f5fe4..30a085f2b8fa 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1200,10 +1200,10 @@  static int stmmac_init_phy(struct net_device *dev)
 static int stmmac_phy_setup(struct stmmac_priv *priv)
 {
 	struct stmmac_mdio_bus_data *mdio_bus_data;
-	int max_speed = priv->plat->max_speed;
 	int mode = priv->plat->phy_interface;
 	struct fwnode_handle *fwnode;
 	struct phylink *phylink;
+	int max_speed;
 
 	priv->phylink_config.dev = &priv->dev->dev;
 	priv->phylink_config.type = PHYLINK_NETDEV;
@@ -1222,29 +1222,18 @@  static int stmmac_phy_setup(struct stmmac_priv *priv)
 				    priv->phylink_config.supported_interfaces);
 
 	priv->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
-		MAC_10 | MAC_100;
-
-	if (!max_speed || max_speed >= 1000)
-		priv->phylink_config.mac_capabilities |= MAC_1000;
+		MAC_10 | MAC_100 | MAC_1000;
 
 	if (priv->plat->has_gmac4) {
-		if (!max_speed || max_speed >= 2500)
-			priv->phylink_config.mac_capabilities |= MAC_2500FD;
+		priv->phylink_config.mac_capabilities |= MAC_2500FD;
 	} else if (priv->plat->has_xgmac) {
-		if (!max_speed || max_speed >= 2500)
-			priv->phylink_config.mac_capabilities |= MAC_2500FD;
-		if (!max_speed || max_speed >= 5000)
-			priv->phylink_config.mac_capabilities |= MAC_5000FD;
-		if (!max_speed || max_speed >= 10000)
-			priv->phylink_config.mac_capabilities |= MAC_10000FD;
-		if (!max_speed || max_speed >= 25000)
-			priv->phylink_config.mac_capabilities |= MAC_25000FD;
-		if (!max_speed || max_speed >= 40000)
-			priv->phylink_config.mac_capabilities |= MAC_40000FD;
-		if (!max_speed || max_speed >= 50000)
-			priv->phylink_config.mac_capabilities |= MAC_50000FD;
-		if (!max_speed || max_speed >= 100000)
-			priv->phylink_config.mac_capabilities |= MAC_100000FD;
+		priv->phylink_config.mac_capabilities |= MAC_2500FD;
+		priv->phylink_config.mac_capabilities |= MAC_5000FD;
+		priv->phylink_config.mac_capabilities |= MAC_10000FD;
+		priv->phylink_config.mac_capabilities |= MAC_25000FD;
+		priv->phylink_config.mac_capabilities |= MAC_40000FD;
+		priv->phylink_config.mac_capabilities |= MAC_50000FD;
+		priv->phylink_config.mac_capabilities |= MAC_100000FD;
 	}
 
 	/* Half-Duplex can only work with single queue */
@@ -1253,6 +1242,10 @@  static int stmmac_phy_setup(struct stmmac_priv *priv)
 			~(MAC_10HD | MAC_100HD | MAC_1000HD);
 	priv->phylink_config.mac_managed_pm = true;
 
+	max_speed = priv->plat->max_speed;
+	if (max_speed)
+		phylink_limit_mac_speed(&priv->phylink_config, max_speed);
+
 	fwnode = priv->plat->port_node;
 	if (!fwnode)
 		fwnode = dev_fwnode(priv->device);