Message ID | E1rDOgN-00DvkE-D8@rmk-PC.armlinux.org.uk (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | ACPI/arm64: add support for virtual cpu hotplug | expand |
On Wed, 13 Dec 2023 12:49:47 +0000 Russell King (Oracle) <rmk+kernel@armlinux.org.uk> wrote: > From: James Morse <james.morse@arm.com> > > acpi_processor_hotadd_init() will make a CPU present by mapping it > based on its hardware id. > > 'hotadd_init' is ambiguous once there are two different behaviours > for cpu hotplug. This is for toggling the _STA present bit. Subsequent > patches will add support for toggling the _STA enabled bit, named > acpi_processor_make_enabled(). > > Rename it acpi_processor_make_present() to make it clear this is > for CPUs that were not previously present. > > Expose the function prototypes it uses to allow the preprocessor > guards to be removed. The IS_ENABLED() check will let the compiler > dead-code elimination pass remove this if it isn't going to be > used. > > Signed-off-by: James Morse <james.morse@arm.com> > Tested-by: Miguel Luis <miguel.luis@oracle.com> > Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com> > Tested-by: Jianyong Wu <jianyong.wu@arm.com> > --- > Outstanding comments: > https://lore.kernel.org/r/20230914151720.00007105@Huawei.com If it's not caused a build warning yet, chances are high this is fine. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > https://lore.kernel.org/r/b8f430c1-c30f-191f-18c6-f750fa6ba476@redhat.com > For this comment, we use IS_ENABLED() in multiple places in the kernel in > this way, and it isn't a problem. > --- > drivers/acpi/acpi_processor.c | 14 +++++--------- > include/linux/acpi.h | 2 -- > 2 files changed, 5 insertions(+), 11 deletions(-) > > diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c > index c8e960ff0aca..26e3efb74614 100644 > --- a/drivers/acpi/acpi_processor.c > +++ b/drivers/acpi/acpi_processor.c > @@ -183,13 +183,15 @@ static void __init acpi_pcc_cpufreq_init(void) {} > #endif /* CONFIG_X86 */ > > /* Initialization */ > -#ifdef CONFIG_ACPI_HOTPLUG_PRESENT_CPU > -static int acpi_processor_hotadd_init(struct acpi_processor *pr) > +static int acpi_processor_make_present(struct acpi_processor *pr) > { > unsigned long long sta; > acpi_status status; > int ret; > > + if (!IS_ENABLED(CONFIG_ACPI_HOTPLUG_PRESENT_CPU)) > + return -ENODEV; > + > if (invalid_phys_cpuid(pr->phys_id)) > return -ENODEV; > > @@ -223,12 +225,6 @@ static int acpi_processor_hotadd_init(struct acpi_processor *pr) > cpu_maps_update_done(); > return ret; > } > -#else > -static inline int acpi_processor_hotadd_init(struct acpi_processor *pr) > -{ > - return -ENODEV; > -} > -#endif /* CONFIG_ACPI_HOTPLUG_PRESENT_CPU */ > > static int acpi_processor_get_info(struct acpi_device *device) > { > @@ -335,7 +331,7 @@ static int acpi_processor_get_info(struct acpi_device *device) > * because cpuid <-> apicid mapping is persistent now. > */ > if (invalid_logical_cpuid(pr->id) || !cpu_present(pr->id)) { > - int ret = acpi_processor_hotadd_init(pr); > + int ret = acpi_processor_make_present(pr); > > if (ret) > return ret; > diff --git a/include/linux/acpi.h b/include/linux/acpi.h > index 36071bc11acd..19d009ca9e7a 100644 > --- a/include/linux/acpi.h > +++ b/include/linux/acpi.h > @@ -301,12 +301,10 @@ static inline int acpi_processor_evaluate_cst(acpi_handle handle, u32 cpu, > } > #endif > > -#ifdef CONFIG_ACPI_HOTPLUG_PRESENT_CPU > /* Arch dependent functions for cpu hotplug support */ > int acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, u32 acpi_id, > int *pcpu); > int acpi_unmap_cpu(int cpu); > -#endif /* CONFIG_ACPI_HOTPLUG_PRESENT_CPU */ > > #ifdef CONFIG_ACPI_HOTPLUG_IOAPIC > int acpi_get_ioapic_id(acpi_handle handle, u32 gsi_base, u64 *phys_addr);
On Thu, Dec 14, 2023 at 05:43:37PM +0000, Jonathan Cameron wrote: > On Wed, 13 Dec 2023 12:49:47 +0000 > Russell King (Oracle) <rmk+kernel@armlinux.org.uk> wrote: > > > From: James Morse <james.morse@arm.com> > > > > acpi_processor_hotadd_init() will make a CPU present by mapping it > > based on its hardware id. > > > > 'hotadd_init' is ambiguous once there are two different behaviours > > for cpu hotplug. This is for toggling the _STA present bit. Subsequent > > patches will add support for toggling the _STA enabled bit, named > > acpi_processor_make_enabled(). > > > > Rename it acpi_processor_make_present() to make it clear this is > > for CPUs that were not previously present. > > > > Expose the function prototypes it uses to allow the preprocessor > > guards to be removed. The IS_ENABLED() check will let the compiler > > dead-code elimination pass remove this if it isn't going to be > > used. > > > > Signed-off-by: James Morse <james.morse@arm.com> > > Tested-by: Miguel Luis <miguel.luis@oracle.com> > > Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com> > > Tested-by: Jianyong Wu <jianyong.wu@arm.com> > > --- > > Outstanding comments: > > https://lore.kernel.org/r/20230914151720.00007105@Huawei.com > > If it's not caused a build warning yet, chances are high this is fine. > > Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > > https://lore.kernel.org/r/b8f430c1-c30f-191f-18c6-f750fa6ba476@redhat.com > > For this comment, we use IS_ENABLED() in multiple places in the kernel in > > this way, and it isn't a problem. Yes, for both of these comments, I think they aren't something that needs any action - these patches have been published in my tree since October, and that is subject to the kernel build bot which hasn't found any issues. So, I'll add your r-b, add my s-o-b, and remove the "outstanding comments" from this patch. Thanks.
diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c index c8e960ff0aca..26e3efb74614 100644 --- a/drivers/acpi/acpi_processor.c +++ b/drivers/acpi/acpi_processor.c @@ -183,13 +183,15 @@ static void __init acpi_pcc_cpufreq_init(void) {} #endif /* CONFIG_X86 */ /* Initialization */ -#ifdef CONFIG_ACPI_HOTPLUG_PRESENT_CPU -static int acpi_processor_hotadd_init(struct acpi_processor *pr) +static int acpi_processor_make_present(struct acpi_processor *pr) { unsigned long long sta; acpi_status status; int ret; + if (!IS_ENABLED(CONFIG_ACPI_HOTPLUG_PRESENT_CPU)) + return -ENODEV; + if (invalid_phys_cpuid(pr->phys_id)) return -ENODEV; @@ -223,12 +225,6 @@ static int acpi_processor_hotadd_init(struct acpi_processor *pr) cpu_maps_update_done(); return ret; } -#else -static inline int acpi_processor_hotadd_init(struct acpi_processor *pr) -{ - return -ENODEV; -} -#endif /* CONFIG_ACPI_HOTPLUG_PRESENT_CPU */ static int acpi_processor_get_info(struct acpi_device *device) { @@ -335,7 +331,7 @@ static int acpi_processor_get_info(struct acpi_device *device) * because cpuid <-> apicid mapping is persistent now. */ if (invalid_logical_cpuid(pr->id) || !cpu_present(pr->id)) { - int ret = acpi_processor_hotadd_init(pr); + int ret = acpi_processor_make_present(pr); if (ret) return ret; diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 36071bc11acd..19d009ca9e7a 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -301,12 +301,10 @@ static inline int acpi_processor_evaluate_cst(acpi_handle handle, u32 cpu, } #endif -#ifdef CONFIG_ACPI_HOTPLUG_PRESENT_CPU /* Arch dependent functions for cpu hotplug support */ int acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, u32 acpi_id, int *pcpu); int acpi_unmap_cpu(int cpu); -#endif /* CONFIG_ACPI_HOTPLUG_PRESENT_CPU */ #ifdef CONFIG_ACPI_HOTPLUG_IOAPIC int acpi_get_ioapic_id(acpi_handle handle, u32 gsi_base, u64 *phys_addr);