@@ -1640,6 +1640,27 @@ void phy_mac_interrupt(struct phy_device *phydev)
}
EXPORT_SYMBOL(phy_mac_interrupt);
+/**
+ * phy_eee_rx_clock_stop() - configure PHY receive clock in LPI
+ * @phydev: target phy_device struct
+ * @clk_stop_enable: flag to indicate whether the clock can be stopped
+ *
+ * Configure whether the PHY can disable its receive clock during LPI mode,
+ * See IEEE 802.3 sections 22.2.2.2, 35.2.2.10, and 45.2.3.1.4.
+ *
+ * Returns: 0 or negative error.
+ */
+int phy_eee_rx_clock_stop(struct phy_device *phydev, bool clk_stop_enable)
+{
+ /* Configure the PHY to stop receiving xMII
+ * clock while it is signaling LPI.
+ */
+ return phy_modify_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1,
+ MDIO_PCS_CTRL1_CLKSTOP_EN,
+ clk_stop_enable ? MDIO_PCS_CTRL1_CLKSTOP_EN : 0);
+}
+EXPORT_SYMBOL_GPL(phy_eee_rx_clock_stop);
+
/**
* phy_init_eee - init and check the EEE feature
* @phydev: target phy_device struct
@@ -1664,11 +1685,7 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
return -EPROTONOSUPPORT;
if (clk_stop_enable)
- /* Configure the PHY to stop receiving xMII
- * clock while it is signaling LPI.
- */
- ret = phy_set_bits_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1,
- MDIO_PCS_CTRL1_CLKSTOP_EN);
+ ret = phy_eee_rx_clock_stop(phydev, true);
return ret < 0 ? ret : 0;
}
@@ -2095,6 +2095,7 @@ int phy_unregister_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask);
int phy_unregister_fixup_for_id(const char *bus_id);
int phy_unregister_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask);
+int phy_eee_rx_clock_stop(struct phy_device *phydev, bool clk_stop_enable);
int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable);
int phy_get_eee_err(struct phy_device *phydev);
int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_keee *data);