@@ -192,6 +192,19 @@ static void imx_dwmac_exit(struct platform_device *pdev, void *priv)
/* nothing to do now */
}
+static int imx_dwmac_set_clk_tx_rate(void *bsp_priv, struct clk *clk_tx_i,
+ phy_interface_t interface, int speed)
+{
+ struct imx_priv_data *dwmac = bsp_priv;
+
+ interface = dwmac->plat_dat->mac_interface;
+ if (interface == PHY_INTERFACE_MODE_RMII ||
+ interface == PHY_INTERFACE_MODE_MII)
+ return 0;
+
+ return stmmac_set_clk_tx_rate(bsp_priv, clk_tx_i, interface, speed);
+}
+
static void imx_dwmac_fix_speed(void *priv, int speed, unsigned int mode)
{
struct plat_stmmacenet_data *plat_dat;
@@ -358,7 +371,6 @@ static int imx_dwmac_probe(struct platform_device *pdev)
plat_dat->init = imx_dwmac_init;
plat_dat->exit = imx_dwmac_exit;
plat_dat->clks_config = imx_dwmac_clks_config;
- plat_dat->fix_mac_speed = imx_dwmac_fix_speed;
plat_dat->bsp_priv = dwmac;
dwmac->plat_dat = plat_dat;
dwmac->base_addr = stmmac_res.addr;
@@ -371,8 +383,13 @@ static int imx_dwmac_probe(struct platform_device *pdev)
if (ret)
goto err_dwmac_init;
- if (dwmac->ops->fix_mac_speed)
+ if (dwmac->ops->fix_mac_speed) {
plat_dat->fix_mac_speed = dwmac->ops->fix_mac_speed;
+ } else if (!dwmac->ops->mac_rgmii_txclk_auto_adj) {
+ plat_dat->clk_tx_i = dwmac->clk_tx;
+ plat_dat->set_clk_tx_rate = imx_dwmac_set_clk_tx_rate;
+ }
+
dwmac->plat_dat->fix_soc_reset = dwmac->ops->fix_soc_reset;
ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
Convert non-i.MX93 users to use the generic stmmac_set_clk_tx_rate() to configure the MAC transmit clock rate. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> --- .../net/ethernet/stmicro/stmmac/dwmac-imx.c | 21 +++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-)