diff mbox series

[net-next,2/4] net: stmmac: anarion: clean up interface parsing

Message ID E1u3bfK-000Elr-Fa@rmk-PC.armlinux.org.uk (mailing list archive)
State New
Headers show
Series net: stmmac: anarion: cleanups | expand

Commit Message

Russell King (Oracle) April 12, 2025, 2:17 p.m. UTC
anarion_config_dt() used a switch statement to check for the RGMII
modes, complete with an unnecessary "fallthrough", and also printed
the numerical value of the PHY interface mode on error. Clean this
up using the phy_interface_mode_is_rgmii() helper, and print the
English version of the PHY interface mode on error.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 .../net/ethernet/stmicro/stmmac/dwmac-anarion.c    | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

Comments

Andrew Lunn April 13, 2025, 9:09 p.m. UTC | #1
On Sat, Apr 12, 2025 at 03:17:02PM +0100, Russell King (Oracle) wrote:
> anarion_config_dt() used a switch statement to check for the RGMII
> modes, complete with an unnecessary "fallthrough", and also printed
> the numerical value of the PHY interface mode on error. Clean this
> up using the phy_interface_mode_is_rgmii() helper, and print the
> English version of the PHY interface mode on error.
> 
> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-anarion.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-anarion.c
index 232aae752690..941ea724c643 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-anarion.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-anarion.c
@@ -79,17 +79,11 @@  anarion_config_dt(struct platform_device *pdev,
 
 	gmac->ctl_block = ctl_block;
 
-	switch (plat_dat->phy_interface) {
-	case PHY_INTERFACE_MODE_RGMII:
-		fallthrough;
-	case PHY_INTERFACE_MODE_RGMII_ID:
-	case PHY_INTERFACE_MODE_RGMII_RXID:
-	case PHY_INTERFACE_MODE_RGMII_TXID:
+	if (phy_interface_mode_is_rgmii(plat_dat->phy_interface)) {
 		gmac->phy_intf_sel = GMAC_CONFIG_INTF_RGMII;
-		break;
-	default:
-		dev_err(&pdev->dev, "Unsupported phy-mode (%d)\n",
-			plat_dat->phy_interface);
+	} else {
+		dev_err(&pdev->dev, "Unsupported phy-mode (%s)\n",
+			phy_modes(plat_dat->phy_interface));
 		return ERR_PTR(-ENOTSUPP);
 	}