| Message ID | YW9bPy5IHzuROhrl@fedora (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] PCI: imx6: Replace legacy gpio interface for gpiod interface | expand |
On Tue, Oct 19, 2021 at 08:56:47PM -0300, Maíra Canal wrote: > Considering the current transition of the GPIO subsystem, remove all > dependencies of the legacy GPIO interface (linux/gpio.h and linux > /of_gpio.h) and replace it with the descriptor-based GPIO approach. > > Signed-off-by: Maíra Canal <maira.canal@usp.br> > --- > V1 -> V2: Rewrite commit log and subject line to match PCI subsystem standard Thanks, I appreciate that! Lorenzo will take a look when it gets to the front of his queue. > --- > drivers/pci/controller/dwc/pci-imx6.c | 31 ++++++++++----------------- > 1 file changed, 11 insertions(+), 20 deletions(-) > > diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c > index 80fc98acf097..e5ee54e37d05 100644 > --- a/drivers/pci/controller/dwc/pci-imx6.c > +++ b/drivers/pci/controller/dwc/pci-imx6.c > @@ -11,13 +11,12 @@ > #include <linux/bitfield.h> > #include <linux/clk.h> > #include <linux/delay.h> > -#include <linux/gpio.h> > +#include <linux/gpio/consumer.h> > #include <linux/kernel.h> > #include <linux/mfd/syscon.h> > #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> > #include <linux/mfd/syscon/imx7-iomuxc-gpr.h> > #include <linux/module.h> > -#include <linux/of_gpio.h> > #include <linux/of_device.h> > #include <linux/of_address.h> > #include <linux/pci.h> > @@ -63,7 +62,7 @@ struct imx6_pcie_drvdata { > > struct imx6_pcie { > struct dw_pcie *pci; > - int reset_gpio; > + struct gpio_desc *reset_gpio; > bool gpio_active_high; > struct clk *pcie_bus; > struct clk *pcie_phy; > @@ -526,11 +525,11 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) > usleep_range(200, 500); > > /* Some boards don't have PCIe reset GPIO. */ > - if (gpio_is_valid(imx6_pcie->reset_gpio)) { > - gpio_set_value_cansleep(imx6_pcie->reset_gpio, > + if (imx6_pcie->reset_gpio) { > + gpiod_set_value_cansleep(imx6_pcie->reset_gpio, > imx6_pcie->gpio_active_high); > msleep(100); > - gpio_set_value_cansleep(imx6_pcie->reset_gpio, > + gpiod_set_value_cansleep(imx6_pcie->reset_gpio, > !imx6_pcie->gpio_active_high); > } > > @@ -1025,22 +1024,14 @@ static int imx6_pcie_probe(struct platform_device *pdev) > return PTR_ERR(pci->dbi_base); > > /* Fetch GPIOs */ > - imx6_pcie->reset_gpio = of_get_named_gpio(node, "reset-gpio", 0); > imx6_pcie->gpio_active_high = of_property_read_bool(node, > "reset-gpio-active-high"); > - if (gpio_is_valid(imx6_pcie->reset_gpio)) { > - ret = devm_gpio_request_one(dev, imx6_pcie->reset_gpio, > - imx6_pcie->gpio_active_high ? > - GPIOF_OUT_INIT_HIGH : > - GPIOF_OUT_INIT_LOW, > - "PCIe reset"); > - if (ret) { > - dev_err(dev, "unable to get reset gpio\n"); > - return ret; > - } > - } else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) { > - return imx6_pcie->reset_gpio; > - } > + imx6_pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset", > + imx6_pcie->gpio_active_high ? GPIOD_OUT_HIGH : > + GPIOD_OUT_LOW); > + if (IS_ERR(imx6_pcie->reset_gpio)) > + return dev_err_probe(dev, PTR_ERR(imx6_pcie->reset_gpio), > + "unable to get reset gpio\n"); > > /* Fetch clocks */ > imx6_pcie->pcie_phy = devm_clk_get(dev, "pcie_phy"); > -- > 2.31.1 >
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 80fc98acf097..e5ee54e37d05 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -11,13 +11,12 @@ #include <linux/bitfield.h> #include <linux/clk.h> #include <linux/delay.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/kernel.h> #include <linux/mfd/syscon.h> #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> #include <linux/mfd/syscon/imx7-iomuxc-gpr.h> #include <linux/module.h> -#include <linux/of_gpio.h> #include <linux/of_device.h> #include <linux/of_address.h> #include <linux/pci.h> @@ -63,7 +62,7 @@ struct imx6_pcie_drvdata { struct imx6_pcie { struct dw_pcie *pci; - int reset_gpio; + struct gpio_desc *reset_gpio; bool gpio_active_high; struct clk *pcie_bus; struct clk *pcie_phy; @@ -526,11 +525,11 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) usleep_range(200, 500); /* Some boards don't have PCIe reset GPIO. */ - if (gpio_is_valid(imx6_pcie->reset_gpio)) { - gpio_set_value_cansleep(imx6_pcie->reset_gpio, + if (imx6_pcie->reset_gpio) { + gpiod_set_value_cansleep(imx6_pcie->reset_gpio, imx6_pcie->gpio_active_high); msleep(100); - gpio_set_value_cansleep(imx6_pcie->reset_gpio, + gpiod_set_value_cansleep(imx6_pcie->reset_gpio, !imx6_pcie->gpio_active_high); } @@ -1025,22 +1024,14 @@ static int imx6_pcie_probe(struct platform_device *pdev) return PTR_ERR(pci->dbi_base); /* Fetch GPIOs */ - imx6_pcie->reset_gpio = of_get_named_gpio(node, "reset-gpio", 0); imx6_pcie->gpio_active_high = of_property_read_bool(node, "reset-gpio-active-high"); - if (gpio_is_valid(imx6_pcie->reset_gpio)) { - ret = devm_gpio_request_one(dev, imx6_pcie->reset_gpio, - imx6_pcie->gpio_active_high ? - GPIOF_OUT_INIT_HIGH : - GPIOF_OUT_INIT_LOW, - "PCIe reset"); - if (ret) { - dev_err(dev, "unable to get reset gpio\n"); - return ret; - } - } else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) { - return imx6_pcie->reset_gpio; - } + imx6_pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset", + imx6_pcie->gpio_active_high ? GPIOD_OUT_HIGH : + GPIOD_OUT_LOW); + if (IS_ERR(imx6_pcie->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(imx6_pcie->reset_gpio), + "unable to get reset gpio\n"); /* Fetch clocks */ imx6_pcie->pcie_phy = devm_clk_get(dev, "pcie_phy");
Considering the current transition of the GPIO subsystem, remove all dependencies of the legacy GPIO interface (linux/gpio.h and linux /of_gpio.h) and replace it with the descriptor-based GPIO approach. Signed-off-by: Maíra Canal <maira.canal@usp.br> --- V1 -> V2: Rewrite commit log and subject line to match PCI subsystem standard --- drivers/pci/controller/dwc/pci-imx6.c | 31 ++++++++++----------------- 1 file changed, 11 insertions(+), 20 deletions(-)