diff mbox series

[v2] mfd: stmpe: switch to using gpiod API

Message ID YxeS1BK2OBH1P/kO@google.com (mailing list archive)
State New, archived
Headers show
Series [v2] mfd: stmpe: switch to using gpiod API | expand

Commit Message

Dmitry Torokhov Sept. 6, 2022, 6:35 p.m. UTC
This patch switches the driver away from legacy gpio/of_gpio API to
gpiod API, and removes use of of_get_named_gpio_flags() which I want to
make private to gpiolib.

We also need to patch relevant DTS files, as the original code relied on
the fact that of_get_named_gpio_flags() would fetch any data encoded in
GPIO flags, even if it does not reflect valid flags for a GPIO.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---

v1->v2:
 - add DTS changes, as noticed by Francesco Dolcini.

I guess we could do a dance of changing stmpe to check the flags coming
from DTS and try to distinguish IRQ flags from proper GPIO flags, then
have a separate patch changing DTSes, and finally a 2nd patch to stmpe
to use GPIOD API, but I am hoping we could apply this in one go...

 arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi |  2 +-
 arch/arm/boot/dts/tegra30-apalis.dtsi      |  2 +-
 arch/arm/boot/dts/tegra30-colibri.dtsi     |  2 +-
 drivers/mfd/stmpe.c                        | 36 ++++++++--------------
 4 files changed, 16 insertions(+), 26 deletions(-)

Comments

Linus Walleij Sept. 6, 2022, 6:58 p.m. UTC | #1
On Tue, Sep 6, 2022 at 8:35 PM Dmitry Torokhov
<dmitry.torokhov@gmail.com> wrote:

> This patch switches the driver away from legacy gpio/of_gpio API to
> gpiod API, and removes use of of_get_named_gpio_flags() which I want to
> make private to gpiolib.
>
> We also need to patch relevant DTS files, as the original code relied on
> the fact that of_get_named_gpio_flags() would fetch any data encoded in
> GPIO flags, even if it does not reflect valid flags for a GPIO.
>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

> ---
>
> v1->v2:
>  - add DTS changes, as noticed by Francesco Dolcini.
>
> I guess we could do a dance of changing stmpe to check the flags coming
> from DTS and try to distinguish IRQ flags from proper GPIO flags, then
> have a separate patch changing DTSes, and finally a 2nd patch to stmpe
> to use GPIOD API, but I am hoping we could apply this in one go...

It's a mess, let's just apply it and forget about it. It's one of those
trees falling in the forest and noone is there to hear it fall-type of
things.

Yours,
Linus Walleij
Lee Jones Sept. 8, 2022, 10:39 a.m. UTC | #2
On Tue, 06 Sep 2022, Dmitry Torokhov wrote:

> This patch switches the driver away from legacy gpio/of_gpio API to
> gpiod API, and removes use of of_get_named_gpio_flags() which I want to
> make private to gpiolib.
> 
> We also need to patch relevant DTS files, as the original code relied on
> the fact that of_get_named_gpio_flags() would fetch any data encoded in
> GPIO flags, even if it does not reflect valid flags for a GPIO.
> 
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
> 
> v1->v2:
>  - add DTS changes, as noticed by Francesco Dolcini.
> 
> I guess we could do a dance of changing stmpe to check the flags coming
> from DTS and try to distinguish IRQ flags from proper GPIO flags, then
> have a separate patch changing DTSes, and finally a 2nd patch to stmpe
> to use GPIOD API, but I am hoping we could apply this in one go...
> 
>  arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi |  2 +-
>  arch/arm/boot/dts/tegra30-apalis.dtsi      |  2 +-
>  arch/arm/boot/dts/tegra30-colibri.dtsi     |  2 +-
>  drivers/mfd/stmpe.c                        | 36 ++++++++--------------
>  4 files changed, 16 insertions(+), 26 deletions(-)

Applied, thanks.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
index 380f22a35821..a1bcd67fa505 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
@@ -993,7 +993,7 @@  ldo8_reg: ldo8 {
 		touchscreen@41 {
 			compatible = "st,stmpe811";
 			reg = <0x41>;
-			irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 9bdc4cb71449..99d7dad72d29 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -976,7 +976,7 @@  ldo8_reg: ldo8 {
 		touchscreen@41 {
 			compatible = "st,stmpe811";
 			reg = <0x41>;
-			irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 310dff05910d..2867a138e011 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -849,7 +849,7 @@  ldo8_reg: ldo8 {
 		touchscreen@41 {
 			compatible = "st,stmpe811";
 			reg = <0x41>;
-			irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 987e251d90ae..0c4f74197d3e 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -8,14 +8,13 @@ 
  */
 
 #include <linux/err.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 #include <linux/pm.h>
 #include <linux/slab.h>
 #include <linux/mfd/core.h>
@@ -30,17 +29,12 @@ 
  * @irq_trigger: IRQ trigger to use for the interrupt to the host
  * @autosleep: bool to enable/disable stmpe autosleep
  * @autosleep_timeout: inactivity timeout in milliseconds for autosleep
- * @irq_over_gpio: true if gpio is used to get irq
- * @irq_gpio: gpio number over which irq will be requested (significant only if
- *	      irq_over_gpio is true)
  */
 struct stmpe_platform_data {
 	int id;
 	unsigned int blocks;
 	unsigned int irq_trigger;
 	bool autosleep;
-	bool irq_over_gpio;
-	int irq_gpio;
 	int autosleep_timeout;
 };
 
@@ -1349,13 +1343,6 @@  static void stmpe_of_probe(struct stmpe_platform_data *pdata,
 	if (pdata->id < 0)
 		pdata->id = -1;
 
-	pdata->irq_gpio = of_get_named_gpio_flags(np, "irq-gpio", 0,
-				&pdata->irq_trigger);
-	if (gpio_is_valid(pdata->irq_gpio))
-		pdata->irq_over_gpio = 1;
-	else
-		pdata->irq_trigger = IRQF_TRIGGER_NONE;
-
 	of_property_read_u32(np, "st,autosleep-timeout",
 			&pdata->autosleep_timeout);
 
@@ -1381,6 +1368,7 @@  int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum)
 	struct stmpe_platform_data *pdata;
 	struct device_node *np = ci->dev->of_node;
 	struct stmpe *stmpe;
+	struct gpio_desc *irq_gpio;
 	int ret;
 	u32 val;
 
@@ -1434,18 +1422,20 @@  int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum)
 	if (ci->init)
 		ci->init(stmpe);
 
-	if (pdata->irq_over_gpio) {
-		ret = devm_gpio_request_one(ci->dev, pdata->irq_gpio,
-				GPIOF_DIR_IN, "stmpe");
-		if (ret) {
-			dev_err(stmpe->dev, "failed to request IRQ GPIO: %d\n",
-					ret);
-			return ret;
-		}
+	irq_gpio = devm_gpiod_get_optional(ci->dev, "irq", GPIOD_ASIS);
+	ret = PTR_ERR_OR_ZERO(irq_gpio);
+	if (ret) {
+		dev_err(stmpe->dev, "failed to request IRQ GPIO: %d\n", ret);
+		return ret;
+	}
 
-		stmpe->irq = gpio_to_irq(pdata->irq_gpio);
+	if (irq_gpio) {
+		stmpe->irq = gpiod_to_irq(irq_gpio);
+		pdata->irq_trigger = gpiod_is_active_low(irq_gpio) ?
+					IRQF_TRIGGER_LOW : IRQF_TRIGGER_HIGH;
 	} else {
 		stmpe->irq = ci->irq;
+		pdata->irq_trigger = IRQF_TRIGGER_NONE;
 	}
 
 	if (stmpe->irq < 0) {