diff mbox series

ARM: spitz: fix GPIO assignment for backlight

Message ID Znc3JMEgF22xDVvB@google.com (mailing list archive)
State New, archived
Headers show
Series ARM: spitz: fix GPIO assignment for backlight | expand

Commit Message

Dmitry Torokhov June 22, 2024, 8:42 p.m. UTC 
GPIOs controlling backlight on Spitz and Akita are coming from GPIO
expanders, not the pxa27xx-gpio block, correct it.

Additionally GPIO lookup tables operate with pin numbers rather than
legacy GPIO numbers, fix that as well. Use raw numbers instead of legacy
GPIO names to avoid confusion.

Fixes: ee0c8e494cc3 ("backlight: corgi: Convert to use GPIO descriptors")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---

Linus, I am not sure if this is actually an issue, but I strongly
suspect that it is. I have no hardware, so no means to test it, sorry.

 arch/arm/mach-pxa/spitz.c | 30 ++++++++++--------------------
 1 file changed, 10 insertions(+), 20 deletions(-)

Comments

Linus Walleij June 26, 2024, 10:43 a.m. UTC | #1 
On Sat, Jun 22, 2024 at 10:42 PM Dmitry Torokhov
<dmitry.torokhov@gmail.com> wrote:

> GPIOs controlling backlight on Spitz and Akita are coming from GPIO
> expanders, not the pxa27xx-gpio block, correct it.
>
> Additionally GPIO lookup tables operate with pin numbers rather than
> legacy GPIO numbers, fix that as well. Use raw numbers instead of legacy
> GPIO names to avoid confusion.
>
> Fixes: ee0c8e494cc3 ("backlight: corgi: Convert to use GPIO descriptors")
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
>
> Linus, I am not sure if this is actually an issue, but I strongly
> suspect that it is. I have no hardware, so no means to test it, sorry.

Looks right to me,
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Maybe you can send it directly to soc@kernel.org so it can be applied?

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 3c5f5a3cb480..10ab16dcd827 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -520,10 +520,8 @@  static struct gpiod_lookup_table spitz_ads7846_gpio_table = {
 static struct gpiod_lookup_table spitz_lcdcon_gpio_table = {
 	.dev_id = "spi2.1",
 	.table = {
-		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_CONT,
-			    "BL_CONT", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_ON,
-			    "BL_ON", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.1", 6, "BL_CONT", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("sharp-scoop.1", 7, "BL_ON", GPIO_ACTIVE_HIGH),
 		{ },
 	},
 };
@@ -531,10 +529,8 @@  static struct gpiod_lookup_table spitz_lcdcon_gpio_table = {
 static struct gpiod_lookup_table akita_lcdcon_gpio_table = {
 	.dev_id = "spi2.1",
 	.table = {
-		GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_CONT,
-			    "BL_CONT", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_ON,
-			    "BL_ON", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("i2c-max7310", 3, "BL_ON", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("i2c-max7310", 4, "BL_CONT", GPIO_ACTIVE_LOW),
 		{ },
 	},
 };
@@ -964,12 +960,9 @@  static inline void spitz_i2c_init(void) {}
 static struct gpiod_lookup_table spitz_audio_gpio_table = {
 	.dev_id = "spitz-audio",
 	.table = {
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE,
-			    "mute-l", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE,
-			    "mute-r", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop.1", SPITZ_GPIO_MIC_BIAS - SPITZ_SCP2_GPIO_BASE,
-			    "mic", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.0", 3, "mute-l", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.0", 4, "mute-r", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.1", 8, "mic", GPIO_ACTIVE_HIGH),
 		{ },
 	},
 };
@@ -977,12 +970,9 @@  static struct gpiod_lookup_table spitz_audio_gpio_table = {
 static struct gpiod_lookup_table akita_audio_gpio_table = {
 	.dev_id = "spitz-audio",
 	.table = {
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE,
-			    "mute-l", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE,
-			    "mute-r", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("i2c-max7310", AKITA_GPIO_MIC_BIAS - AKITA_IOEXP_GPIO_BASE,
-			    "mic", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.0", 3, "mute-l", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.0", 4, "mute-r", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("i2c-max7310", 2, "mic", GPIO_ACTIVE_HIGH),
 		{ },
 	},
 };