@@ -63,12 +63,12 @@ static int powernow_k6_get_cpu_multiplier(void)
/**
- * powernow_k6_set_state - set the PowerNow! multiplier
+ * powernow_k6_target - set the PowerNow! multiplier
* @best_i: clock_ratio[best_i] is the target multiplier
*
* Tries to change the PowerNow! multiplier
*/
-static void powernow_k6_set_state(struct cpufreq_policy *policy,
+static int powernow_k6_target(struct cpufreq_policy *policy,
unsigned int best_i)
{
unsigned long outvalue = 0, invalue = 0;
@@ -77,7 +77,7 @@ static void powernow_k6_set_state(struct cpufreq_policy *policy,
if (clock_ratio[best_i].driver_data > max_multiplier) {
printk(KERN_ERR PFX "invalid target frequency\n");
- return;
+ return -EINVAL;
}
freqs.old = busfreq * powernow_k6_get_cpu_multiplier();
@@ -100,31 +100,6 @@ static void powernow_k6_set_state(struct cpufreq_policy *policy,
cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
- return;
-}
-
-
-/**
- * powernow_k6_setpolicy - sets a new CPUFreq policy
- * @policy: new policy
- * @target_freq: the target frequency
- * @relation: how that frequency relates to achieved frequency
- * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
- *
- * sets a new CPUFreq policy
- */
-static int powernow_k6_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
-{
- unsigned int newstate = 0;
-
- if (cpufreq_frequency_table_target(policy, &clock_ratio[0],
- target_freq, relation, &newstate))
- return -EINVAL;
-
- powernow_k6_set_state(policy, newstate);
-
return 0;
}
@@ -162,7 +137,7 @@ static int powernow_k6_cpu_exit(struct cpufreq_policy *policy)
unsigned int i;
for (i = 0; i < 8; i++) {
if (i == max_multiplier)
- powernow_k6_set_state(policy, i);
+ powernow_k6_target(policy, i);
}
cpufreq_frequency_table_put_attr(policy->cpu);
return 0;
@@ -177,7 +152,7 @@ static unsigned int powernow_k6_get(unsigned int cpu)
static struct cpufreq_driver powernow_k6_driver = {
.verify = cpufreq_generic_frequency_table_verify,
- .target = powernow_k6_target,
+ .target_index = powernow_k6_target,
.init = powernow_k6_cpu_init,
.exit = powernow_k6_cpu_exit,
.get = powernow_k6_get,
@@ -248,7 +248,7 @@ static void change_VID(int vid)
}
-static void change_speed(struct cpufreq_policy *policy, unsigned int index)
+static int powernow_target(struct cpufreq_policy *policy, unsigned int index)
{
u8 fid, vid;
struct cpufreq_freqs freqs;
@@ -291,6 +291,8 @@ static void change_speed(struct cpufreq_policy *policy, unsigned int index)
local_irq_enable();
cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+
+ return 0;
}
@@ -533,22 +535,6 @@ static int powernow_decode_bios(int maxfid, int startvid)
}
-static int powernow_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
-{
- unsigned int newstate;
-
- if (cpufreq_frequency_table_target(policy, powernow_table, target_freq,
- relation, &newstate))
- return -EINVAL;
-
- change_speed(policy, newstate);
-
- return 0;
-}
-
-
/*
* We use the fact that the bus frequency is somehow
* a multiple of 100000/3 khz, then we compute sgtc according
@@ -696,7 +682,7 @@ static int powernow_cpu_exit(struct cpufreq_policy *policy)
static struct cpufreq_driver powernow_driver = {
.verify = cpufreq_generic_frequency_table_verify,
- .target = powernow_target,
+ .target_index = powernow_target,
.get = powernow_get,
#ifdef CONFIG_X86_POWERNOW_K7_ACPI
.bios_limit = acpi_processor_get_bios_limit,
@@ -977,20 +977,17 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data,
struct powernowk8_target_arg {
struct cpufreq_policy *pol;
- unsigned targfreq;
- unsigned relation;
+ unsigned newstate;
};
static long powernowk8_target_fn(void *arg)
{
struct powernowk8_target_arg *pta = arg;
struct cpufreq_policy *pol = pta->pol;
- unsigned targfreq = pta->targfreq;
- unsigned relation = pta->relation;
+ unsigned newstate = pta->newstate;
struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
u32 checkfid;
u32 checkvid;
- unsigned int newstate;
int ret;
if (!data)
@@ -1004,8 +1001,9 @@ static long powernowk8_target_fn(void *arg)
return -EIO;
}
- pr_debug("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n",
- pol->cpu, targfreq, pol->min, pol->max, relation);
+ pr_debug("targ: cpu %d, %d kHz, min %d, max %d\n",
+ pol->cpu, data->powernow_table[newstate].frequency, pol->min,
+ pol->max);
if (query_current_values_with_pending_wait(data))
return -EIO;
@@ -1021,10 +1019,6 @@ static long powernowk8_target_fn(void *arg)
checkvid, data->currvid);
}
- if (cpufreq_frequency_table_target(pol, data->powernow_table,
- targfreq, relation, &newstate))
- return -EIO;
-
mutex_lock(&fidvid_mutex);
powernow_k8_acpi_pst_values(data, newstate);
@@ -1044,11 +1038,9 @@ static long powernowk8_target_fn(void *arg)
}
/* Driver entry point to switch to the target frequency */
-static int powernowk8_target(struct cpufreq_policy *pol,
- unsigned targfreq, unsigned relation)
+static int powernowk8_target(struct cpufreq_policy *pol, unsigned index)
{
- struct powernowk8_target_arg pta = { .pol = pol, .targfreq = targfreq,
- .relation = relation };
+ struct powernowk8_target_arg pta = { .pol = pol, .newstate = index };
return work_on_cpu(pol->cpu, powernowk8_target_fn, &pta);
}
@@ -1216,7 +1208,7 @@ out:
static struct cpufreq_driver cpufreq_amd64_driver = {
.verify = cpufreq_generic_frequency_table_verify,
- .target = powernowk8_target,
+ .target_index = powernowk8_target,
.bios_limit = acpi_processor_get_bios_limit,
.init = powernowk8_cpu_init,
.exit = powernowk8_cpu_exit,
This patch converts existing .target() to newly defined light weight .target_index() routine for this driver. CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and will pass index to it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> --- drivers/cpufreq/powernow-k6.c | 35 +++++------------------------------ drivers/cpufreq/powernow-k7.c | 22 ++++------------------ drivers/cpufreq/powernow-k8.c | 24 ++++++++---------------- 3 files changed, 17 insertions(+), 64 deletions(-)