new file mode 100644
@@ -0,0 +1,321 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/allwinner,sun8i-a83t-gmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83t EMAC Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+ compatible:
+ oneOf:
+ - const: allwinner,sun8i-a83t-emac
+ - const: allwinner,sun8i-h3-emac
+ - const: allwinner,sun8i-r40-emac
+ - const: allwinner,sun8i-v3s-emac
+ - const: allwinner,sun50i-a64-emac
+ - items:
+ - const: allwinner,sun50i-h6-emac
+ - const: allwinner,sun50i-a64-emac
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ const: macirq
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: stmmaceth
+
+ syscon:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ Phandle to the device containing the EMAC or GMAC clock
+ register
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - phy-connection-type
+ - phy-handle
+ - syscon
+
+allOf:
+ - $ref: "snps,dwmac.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun8i-a83t-emac
+ - allwinner,sun8i-h3-emac
+ - allwinner,sun8i-v3s-emac
+ - allwinner,sun50i-a64-emac
+
+ then:
+ properties:
+ allwinner,tx-delay-ps:
+ default: 0
+ minimum: 0
+ maximum: 700
+ multipleOf: 100
+ description:
+ External RGMII PHY TX clock delay chain value in ps.
+
+ allwinner,rx-delay-ps:
+ default: 0
+ minimum: 0
+ maximum: 3100
+ multipleOf: 100
+ description:
+ External RGMII PHY TX clock delay chain value in ps.
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun8i-r40-emac
+
+ then:
+ properties:
+ allwinner,rx-delay-ps:
+ default: 0
+ minimum: 0
+ maximum: 700
+ multipleOf: 100
+ description:
+ External RGMII PHY TX clock delay chain value in ps.
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun8i-h3-emac
+ - allwinner,sun8i-v3s-emac
+
+ then:
+ properties:
+ allwinner,leds-active-low:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ EPHY LEDs are active low.
+
+ mdio-mux:
+ type: object
+
+ properties:
+ compatible:
+ const: allwinner,sun8i-h3-mdio-mux
+
+ mdio-parent-bus:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ Phandle to EMAC MDIO.
+
+ mdio@1:
+ type: object
+ description: Internal MDIO Bus
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ compatible:
+ const: allwinner,sun8i-h3-mdio-internal
+
+ reg:
+ const: 1
+
+ patternProperties:
+ "^ethernet-phy@[0-9a-f]$":
+ type: object
+ description:
+ Integrated PHY node
+
+ properties:
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ required:
+ - clocks
+ - resets
+
+
+ mdio@2:
+ type: object
+ description: External MDIO Bus (H3 only)
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ reg:
+ const: 2
+
+ required:
+ - compatible
+ - mdio-parent-bus
+ - mdio@1
+
+examples:
+ - |
+ ethernet@1c0b000 {
+ compatible = "allwinner,sun8i-h3-emac";
+ syscon = <&syscon>;
+ reg = <0x01c0b000 0x104>;
+ interrupts = <0 82 1>;
+ interrupt-names = "macirq";
+ resets = <&ccu 12>;
+ reset-names = "stmmaceth";
+ clocks = <&ccu 27>;
+ clock-names = "stmmaceth";
+
+ phy-handle = <&int_mii_phy>;
+ phy-connection-type = "mii";
+ allwinner,leds-active-low;
+
+ mdio1: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ };
+
+ mdio-mux {
+ compatible = "allwinner,sun8i-h3-mdio-mux";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio-parent-bus = <&mdio1>;
+
+ int_mii_phy: mdio@1 {
+ compatible = "allwinner,sun8i-h3-mdio-internal";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@1 {
+ reg = <1>;
+ clocks = <&ccu 67>;
+ resets = <&ccu 39>;
+ phy-is-integrated;
+ };
+ };
+
+ mdio@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
+ - |
+ ethernet@1c0b000 {
+ compatible = "allwinner,sun8i-h3-emac";
+ syscon = <&syscon>;
+ reg = <0x01c0b000 0x104>;
+ interrupts = <0 82 1>;
+ interrupt-names = "macirq";
+ resets = <&ccu 12>;
+ reset-names = "stmmaceth";
+ clocks = <&ccu 27>;
+ clock-names = "stmmaceth";
+
+ phy-handle = <&ext_rgmii_phy>;
+ phy-connection-type = "rgmii";
+ allwinner,leds-active-low;
+
+ mdio2: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ };
+
+ mdio-mux {
+ compatible = "allwinner,sun8i-h3-mdio-mux";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mdio-parent-bus = <&mdio2>;
+
+ mdio@1 {
+ compatible = "allwinner,sun8i-h3-mdio-internal";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@1 {
+ reg = <1>;
+ clocks = <&ccu 67>;
+ resets = <&ccu 39>;
+ };
+ };
+
+ mdio@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ext_rgmii_phy: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+ };
+
+ - |
+ ethernet@1c0b000 {
+ compatible = "allwinner,sun8i-a83t-emac";
+ syscon = <&syscon>;
+ reg = <0x01c0b000 0x104>;
+ interrupts = <0 82 1>;
+ interrupt-names = "macirq";
+ resets = <&ccu 13>;
+ reset-names = "stmmaceth";
+ clocks = <&ccu 27>;
+ clock-names = "stmmaceth";
+ phy-handle = <&ext_rgmii_phy1>;
+ phy-connection-type = "rgmii";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ext_rgmii_phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+# FIXME: We should set it, but it would report all the generic
+# properties as additional properties.
+# additionalProperties: false
+
+...
deleted file mode 100644
@@ -1,201 +0,0 @@
-* Allwinner sun8i GMAC ethernet controller
-
-This device is a platform glue layer for stmmac.
-Please see stmmac.txt for the other unchanged properties.
-
-Required properties:
-- compatible: must be one of the following string:
- "allwinner,sun8i-a83t-emac"
- "allwinner,sun8i-h3-emac"
- "allwinner,sun8i-r40-gmac"
- "allwinner,sun8i-v3s-emac"
- "allwinner,sun50i-a64-emac"
- "allwinner,sun50i-h6-emac", "allwinner-sun50i-a64-emac"
-- reg: address and length of the register for the device.
-- interrupts: interrupt for the device
-- interrupt-names: must be "macirq"
-- clocks: A phandle to the reference clock for this device
-- clock-names: must be "stmmaceth"
-- resets: A phandle to the reset control for this device
-- reset-names: must be "stmmaceth"
-- phy-mode: See ethernet.txt
-- phy-handle: See ethernet.txt
-- syscon: A phandle to the device containing the EMAC or GMAC clock register
-
-Optional properties:
-- allwinner,tx-delay-ps: TX clock delay chain value in ps.
- Range is 0-700. Default is 0.
- Unavailable for allwinner,sun8i-r40-gmac
-- allwinner,rx-delay-ps: RX clock delay chain value in ps.
- Range is 0-3100. Default is 0.
- Range is 0-700 for allwinner,sun8i-r40-gmac
-Both delay properties need to be a multiple of 100. They control the
-clock delay for external RGMII PHY. They do not apply to the internal
-PHY or external non-RGMII PHYs.
-
-Optional properties for the following compatibles:
- - "allwinner,sun8i-h3-emac",
- - "allwinner,sun8i-v3s-emac":
-- allwinner,leds-active-low: EPHY LEDs are active low
-
-Required child node of emac:
-- mdio bus node: should be named mdio with compatible "snps,dwmac-mdio"
-
-Required properties of the mdio node:
-- #address-cells: shall be 1
-- #size-cells: shall be 0
-
-The device node referenced by "phy" or "phy-handle" must be a child node
-of the mdio node. See phy.txt for the generic PHY bindings.
-
-The following compatibles require that the emac node have a mdio-mux child
-node called "mdio-mux":
- - "allwinner,sun8i-h3-emac"
- - "allwinner,sun8i-v3s-emac":
-Required properties for the mdio-mux node:
- - compatible = "allwinner,sun8i-h3-mdio-mux"
- - mdio-parent-bus: a phandle to EMAC mdio
- - one child mdio for the integrated mdio with the compatible
- "allwinner,sun8i-h3-mdio-internal"
- - one child mdio for the external mdio if present (V3s have none)
-Required properties for the mdio-mux children node:
- - reg: 1 for internal MDIO bus, 2 for external MDIO bus
-
-The following compatibles require a PHY node representing the integrated
-PHY, under the integrated MDIO bus node if an mdio-mux node is used:
- - "allwinner,sun8i-h3-emac",
- - "allwinner,sun8i-v3s-emac":
-
-Additional information regarding generic multiplexer properties can be found
-at Documentation/devicetree/bindings/net/mdio-mux.txt
-
-Required properties of the integrated phy node:
-- clocks: a phandle to the reference clock for the EPHY
-- resets: a phandle to the reset control for the EPHY
-- Must be a child of the integrated mdio
-
-Example with integrated PHY:
-emac: ethernet@1c0b000 {
- compatible = "allwinner,sun8i-h3-emac";
- syscon = <&syscon>;
- reg = <0x01c0b000 0x104>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- resets = <&ccu RST_BUS_EMAC>;
- reset-names = "stmmaceth";
- clocks = <&ccu CLK_BUS_EMAC>;
- clock-names = "stmmaceth";
-
- phy-handle = <&int_mii_phy>;
- phy-mode = "mii";
- allwinner,leds-active-low;
-
- mdio: mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
- };
-
- mdio-mux {
- compatible = "mdio-mux", "allwinner,sun8i-h3-mdio-mux";
- #address-cells = <1>;
- #size-cells = <0>;
-
- mdio-parent-bus = <&mdio>;
-
- int_mdio: mdio@1 {
- compatible = "allwinner,sun8i-h3-mdio-internal";
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- int_mii_phy: ethernet-phy@1 {
- reg = <1>;
- clocks = <&ccu CLK_BUS_EPHY>;
- resets = <&ccu RST_BUS_EPHY>;
- phy-is-integrated;
- };
- };
- ext_mdio: mdio@2 {
- reg = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-};
-
-Example with external PHY:
-emac: ethernet@1c0b000 {
- compatible = "allwinner,sun8i-h3-emac";
- syscon = <&syscon>;
- reg = <0x01c0b000 0x104>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- resets = <&ccu RST_BUS_EMAC>;
- reset-names = "stmmaceth";
- clocks = <&ccu CLK_BUS_EMAC>;
- clock-names = "stmmaceth";
-
- phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
- allwinner,leds-active-low;
-
- mdio: mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
- };
-
- mdio-mux {
- compatible = "allwinner,sun8i-h3-mdio-mux";
- #address-cells = <1>;
- #size-cells = <0>;
-
- mdio-parent-bus = <&mdio>;
-
- int_mdio: mdio@1 {
- compatible = "allwinner,sun8i-h3-mdio-internal";
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- int_mii_phy: ethernet-phy@1 {
- reg = <1>;
- clocks = <&ccu CLK_BUS_EPHY>;
- resets = <&ccu RST_BUS_EPHY>;
- };
- };
- ext_mdio: mdio@2 {
- reg = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
- ext_rgmii_phy: ethernet-phy@1 {
- reg = <1>;
- };
- }:
- };
-};
-
-Example with SoC without integrated PHY
-
-emac: ethernet@1c0b000 {
- compatible = "allwinner,sun8i-a83t-emac";
- syscon = <&syscon>;
- reg = <0x01c0b000 0x104>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- resets = <&ccu RST_BUS_EMAC>;
- reset-names = "stmmaceth";
- clocks = <&ccu CLK_BUS_EMAC>;
- clock-names = "stmmaceth";
-
- phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
-
- mdio: mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- ext_rgmii_phy: ethernet-phy@1 {
- reg = <1>;
- };
- };
-};
@@ -45,6 +45,11 @@ properties:
contains:
enum:
- allwinner,sun7i-a20-gmac
+ - allwinner,sun8i-a83t-emac
+ - allwinner,sun8i-h3-emac
+ - allwinner,sun8i-r40-emac
+ - allwinner,sun8i-v3s-emac
+ - allwinner,sun50i-a64-emac
- snps,dwmac
- snps,dwmac-3.50a
- snps,dwmac-3.610
@@ -267,6 +272,11 @@ allOf:
contains:
enum:
- allwinner,sun7i-a20-gmac
+ - allwinner,sun8i-a83t-emac
+ - allwinner,sun8i-h3-emac
+ - allwinner,sun8i-r40-emac
+ - allwinner,sun8i-v3s-emac
+ - allwinner,sun50i-a64-emac
- snps,dwxgmac
- snps,dwxgmac-2.10
- st,spear600-gmac
@@ -308,6 +318,11 @@ allOf:
contains:
enum:
- allwinner,sun7i-a20-gmac
+ - allwinner,sun8i-a83t-emac
+ - allwinner,sun8i-h3-emac
+ - allwinner,sun8i-r40-emac
+ - allwinner,sun8i-v3s-emac
+ - allwinner,sun50i-a64-emac
- snps,dwmac-4.00
- snps,dwmac-4.10a
- snps,dwxgmac
Switch our Allwinner H3 EMAC controller binding to a YAML schema to enable the DT validation. Since that controller is based on a Synopsys IP, let's add the validation to that schemas with a bunch of conditionals. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> --- Changes from v2: - Switch to phy-connection-type instead of phy-mode - Change the delay enum to using multipleOf Changes from v1: - Add specific binding document --- Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml | 321 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++- Documentation/devicetree/bindings/net/dwmac-sun8i.txt | 201 +--------------------------------------------- Documentation/devicetree/bindings/net/snps,dwmac.yaml | 15 +++- 3 files changed, 336 insertions(+), 201 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml delete mode 100644 Documentation/devicetree/bindings/net/dwmac-sun8i.txt