| Message ID | af194168fadd80c26f94da740f1e61ce6603225a.1405702442.git.stefan@agner.ch (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Jul 18, 2014 at 07:01:41PM +0200, Stefan Agner wrote: > This adds support for the USB PHY in Vybrid VF610. We assume that > the disconnection without VBUS is also needed for Vybrid. For all > other flags, the presumption of innocence applies. > > Signed-off-by: Stefan Agner <stefan@agner.ch> > --- > drivers/usb/phy/phy-mxs-usb.c | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c > index c42bdf0..207946b 100644 > --- a/drivers/usb/phy/phy-mxs-usb.c > +++ b/drivers/usb/phy/phy-mxs-usb.c > @@ -125,10 +125,15 @@ static const struct mxs_phy_data imx6sl_phy_data = { > MXS_PHY_NEED_IP_FIX, > }; > > +static const struct mxs_phy_data vf610_phy_data = { > + .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, > +}; > + > static const struct of_device_id mxs_phy_dt_ids[] = { > { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, }, > { .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, }, > { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, }, > + { .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, }, > { /* sentinel */ } > }; > MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); > -- > 2.0.1 > Acked-by: Peter Chen <peter.chen@freescale.com>
On Fri, Jul 18, 2014 at 07:01:41PM +0200, Stefan Agner wrote: > This adds support for the USB PHY in Vybrid VF610. We assume that > the disconnection without VBUS is also needed for Vybrid. For all > other flags, the presumption of innocence applies. > > Signed-off-by: Stefan Agner <stefan@agner.ch> > --- > drivers/usb/phy/phy-mxs-usb.c | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c > index c42bdf0..207946b 100644 > --- a/drivers/usb/phy/phy-mxs-usb.c > +++ b/drivers/usb/phy/phy-mxs-usb.c > @@ -125,10 +125,15 @@ static const struct mxs_phy_data imx6sl_phy_data = { > MXS_PHY_NEED_IP_FIX, > }; > > +static const struct mxs_phy_data vf610_phy_data = { > + .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, > +}; > + > static const struct of_device_id mxs_phy_dt_ids[] = { > { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, }, > { .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, }, > { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, }, > + { .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, }, This new compatible string should be documented in Documentation/devicetree/bindings/usb/mxs-phy.txt. Shawn > { /* sentinel */ } > }; > MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); > -- > 2.0.1 >
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index c42bdf0..207946b 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -125,10 +125,15 @@ static const struct mxs_phy_data imx6sl_phy_data = { MXS_PHY_NEED_IP_FIX, }; +static const struct mxs_phy_data vf610_phy_data = { + .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, +}; + static const struct of_device_id mxs_phy_dt_ids[] = { { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, }, { .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, }, { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, }, + { .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
This adds support for the USB PHY in Vybrid VF610. We assume that the disconnection without VBUS is also needed for Vybrid. For all other flags, the presumption of innocence applies. Signed-off-by: Stefan Agner <stefan@agner.ch> --- drivers/usb/phy/phy-mxs-usb.c | 5 +++++ 1 file changed, 5 insertions(+)