@@ -587,14 +587,6 @@ config ARCH_W90X900
<http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
-config ARCH_NUC93X
- bool "Nuvoton NUC93X CPU"
- select CPU_ARM926T
- select CLKDEV_LOOKUP
- help
- Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a
- low-power and high performance MPEG-4/JPEG multimedia controller chip.
-
config ARCH_TEGRA
bool "NVIDIA Tegra"
select CLKDEV_LOOKUP
deleted file mode 100644
@@ -1,19 +0,0 @@
-if ARCH_NUC93X
-
-config CPU_NUC932
- bool
- help
- Support for NUC932 of Nuvoton NUC93X CPUs.
-
-menu "NUC932 Machines"
-
-config MACH_NUC932EVB
- bool "Nuvoton NUC932 Evaluation Board"
- default y
- select CPU_NUC932
- help
- Say Y here if you are using the Nuvoton NUC932EVB
-
-endmenu
-
-endif
deleted file mode 100644
@@ -1,14 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y := irq.o time.o dev.o cpu.o clock.o
-# NUC932 CPU support files
-
-obj-$(CONFIG_CPU_NUC932) += nuc932.o
-
-# machine support
-
-obj-$(CONFIG_MACH_NUC932EVB) += mach-nuc932evb.o
deleted file mode 100644
@@ -1,3 +0,0 @@
-zreladdr-y := 0x00008000
-params_phys-y := 0x00000100
-
deleted file mode 100644
@@ -1,83 +0,0 @@
-/*
- * linux/arch/arm/mach-nuc93x/clock.c
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#include "clock.h"
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-int clk_enable(struct clk *clk)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&clocks_lock, flags);
- if (clk->enabled++ == 0)
- (clk->enable)(clk, 1);
- spin_unlock_irqrestore(&clocks_lock, flags);
-
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- WARN_ON(clk->enabled == 0);
-
- spin_lock_irqsave(&clocks_lock, flags);
- if (--clk->enabled == 0)
- (clk->enable)(clk, 0);
- spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- return 27000000;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void nuc93x_clk_enable(struct clk *clk, int enable)
-{
- unsigned int clocks = clk->cken;
- unsigned long clken;
-
- clken = __raw_readl(NUC93X_VA_CLKPWR);
-
- if (enable)
- clken |= clocks;
- else
- clken &= ~clocks;
-
- __raw_writel(clken, NUC93X_VA_CLKPWR);
-}
-
-void clks_register(struct clk_lookup *clks, size_t num)
-{
- int i;
-
- for (i = 0; i < num; i++)
- clkdev_add(&clks[i]);
-}
deleted file mode 100644
@@ -1,36 +0,0 @@
-/*
- * linux/arch/arm/mach-nuc93x/clock.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- */
-
-#include <linux/clkdev.h>
-
-void nuc93x_clk_enable(struct clk *clk, int enable);
-void clks_register(struct clk_lookup *clks, size_t num);
-
-struct clk {
- unsigned long cken;
- unsigned int enabled;
- void (*enable)(struct clk *, int enable);
-};
-
-#define DEFINE_CLK(_name, _ctrlbit) \
-struct clk clk_##_name = { \
- .enable = nuc93x_clk_enable, \
- .cken = (1 << _ctrlbit), \
- }
-
-#define DEF_CLKLOOK(_clk, _devname, _conname) \
- { \
- .clk = _clk, \
- .dev_id = _devname, \
- .con_id = _conname, \
- }
-
deleted file mode 100644
@@ -1,135 +0,0 @@
-/*
- * linux/arch/arm/mach-nuc93x/cpu.c
- *
- * Copyright (c) 2009 Nuvoton corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * NUC93x series cpu common support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/serial_8250.h>
-#include <linux/delay.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-serial.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-ebi.h>
-
-#include "cpu.h"
-#include "clock.h"
-
-/* Initial IO mappings */
-
-static struct map_desc nuc93x_iodesc[] __initdata = {
- IODESC_ENT(IRQ),
- IODESC_ENT(GCR),
- IODESC_ENT(UART),
- IODESC_ENT(TIMER),
- IODESC_ENT(EBI),
-};
-
-/* Initial nuc932 clock declarations. */
-static DEFINE_CLK(audio, 2);
-static DEFINE_CLK(sd, 3);
-static DEFINE_CLK(jpg, 4);
-static DEFINE_CLK(video, 5);
-static DEFINE_CLK(vpost, 6);
-static DEFINE_CLK(2d, 7);
-static DEFINE_CLK(gpu, 8);
-static DEFINE_CLK(gdma, 9);
-static DEFINE_CLK(adc, 10);
-static DEFINE_CLK(uart, 11);
-static DEFINE_CLK(spi, 12);
-static DEFINE_CLK(pwm, 13);
-static DEFINE_CLK(timer, 14);
-static DEFINE_CLK(wdt, 15);
-static DEFINE_CLK(ac97, 16);
-static DEFINE_CLK(i2s, 16);
-static DEFINE_CLK(usbck, 17);
-static DEFINE_CLK(usb48, 18);
-static DEFINE_CLK(usbh, 19);
-static DEFINE_CLK(i2c, 20);
-static DEFINE_CLK(ext, 0);
-
-static struct clk_lookup nuc932_clkregs[] = {
- DEF_CLKLOOK(&clk_audio, "nuc932-audio", NULL),
- DEF_CLKLOOK(&clk_sd, "nuc932-sd", NULL),
- DEF_CLKLOOK(&clk_jpg, "nuc932-jpg", "NULL"),
- DEF_CLKLOOK(&clk_video, "nuc932-video", "NULL"),
- DEF_CLKLOOK(&clk_vpost, "nuc932-vpost", NULL),
- DEF_CLKLOOK(&clk_2d, "nuc932-2d", NULL),
- DEF_CLKLOOK(&clk_gpu, "nuc932-gpu", NULL),
- DEF_CLKLOOK(&clk_gdma, "nuc932-gdma", "NULL"),
- DEF_CLKLOOK(&clk_adc, "nuc932-adc", NULL),
- DEF_CLKLOOK(&clk_uart, NULL, "uart"),
- DEF_CLKLOOK(&clk_spi, "nuc932-spi", NULL),
- DEF_CLKLOOK(&clk_pwm, "nuc932-pwm", NULL),
- DEF_CLKLOOK(&clk_timer, NULL, "timer"),
- DEF_CLKLOOK(&clk_wdt, "nuc932-wdt", NULL),
- DEF_CLKLOOK(&clk_ac97, "nuc932-ac97", NULL),
- DEF_CLKLOOK(&clk_i2s, "nuc932-i2s", NULL),
- DEF_CLKLOOK(&clk_usbck, "nuc932-usbck", NULL),
- DEF_CLKLOOK(&clk_usb48, "nuc932-usb48", NULL),
- DEF_CLKLOOK(&clk_usbh, "nuc932-usbh", NULL),
- DEF_CLKLOOK(&clk_i2c, "nuc932-i2c", NULL),
- DEF_CLKLOOK(&clk_ext, NULL, "ext"),
-};
-
-/* Initial serial platform data */
-
-struct plat_serial8250_port nuc93x_uart_data[] = {
- NUC93X_8250PORT(UART0),
- {},
-};
-
-struct platform_device nuc93x_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = nuc93x_uart_data,
- },
-};
-
-/*Init NUC93x evb io*/
-
-void __init nuc93x_map_io(struct map_desc *mach_desc, int mach_size)
-{
- unsigned long idcode = 0x0;
-
- iotable_init(mach_desc, mach_size);
- iotable_init(nuc93x_iodesc, ARRAY_SIZE(nuc93x_iodesc));
-
- idcode = __raw_readl(NUC93XPDID);
- if (idcode == NUC932_CPUID)
- printk(KERN_INFO "CPU type 0x%08lx is NUC910\n", idcode);
- else
- printk(KERN_ERR "CPU type detect error!\n");
-
-}
-
-/*Init NUC93x clock*/
-
-void __init nuc93x_init_clocks(void)
-{
- clks_register(nuc932_clkregs, ARRAY_SIZE(nuc932_clkregs));
-}
-
deleted file mode 100644
@@ -1,48 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/cpu.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Header file for NUC93X CPU support
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#define IODESC_ENT(y) \
-{ \
- .virtual = (unsigned long)NUC93X_VA_##y, \
- .pfn = __phys_to_pfn(NUC93X_PA_##y), \
- .length = NUC93X_SZ_##y, \
- .type = MT_DEVICE, \
-}
-
-#define NUC93X_8250PORT(name) \
-{ \
- .membase = name##_BA, \
- .mapbase = name##_PA, \
- .irq = IRQ_##name, \
- .uartclk = 57139200, \
- .regshift = 2, \
- .iotype = UPIO_MEM, \
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
-}
-
-/*Cpu identifier register*/
-
-#define NUC93XPDID NUC93X_VA_GCR
-#define NUC932_CPUID 0x29550091
-
-/* extern file from cpu.c */
-
-extern void nuc93x_clock_source(struct device *dev, unsigned char *src);
-extern void nuc93x_init_clocks(void);
-extern void nuc93x_map_io(struct map_desc *mach_desc, int mach_size);
-extern void nuc93x_board_init(struct platform_device **device, int size);
-extern struct platform_device nuc93x_serial_device;
-
deleted file mode 100644
@@ -1,42 +0,0 @@
-/*
- * linux/arch/arm/mach-nuc93x/dev.c
- *
- * Copyright (C) 2009 Nuvoton corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-
-#include "cpu.h"
-
-/*Here should be your evb resourse,such as LCD*/
-
-static struct platform_device *nuc93x_public_dev[] __initdata = {
- &nuc93x_serial_device,
-};
-
-/* Provide adding specific CPU platform devices API */
-
-void __init nuc93x_board_init(struct platform_device **device, int size)
-{
- platform_add_devices(device, size);
- platform_add_devices(nuc93x_public_dev, ARRAY_SIZE(nuc93x_public_dev));
-}
-
deleted file mode 100644
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/entry-macro.S
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- */
-
-#include <mach/hardware.h>
-#include <mach/regs-irq.h>
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- mov \base, #AIC_BA
-
- ldr \irqnr, [ \base, #AIC_IPER]
- ldr \irqnr, [ \base, #AIC_ISNR]
- cmp \irqnr, #0
-
- .endm
-
- /* currently don't need an disable_fiq macro */
-
- .macro disable_fiq
- .endm
deleted file mode 100644
@@ -1,22 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/hardware.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <mach/map.h>
-
-#endif /* __ASM_ARCH_HARDWARE_H */
deleted file mode 100644
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/io.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * 1:1 mapping for ioremapped regions.
- */
-
-#define __mem_pci(a) (a)
-#define __io(a) __typesafe_io(a)
-
-#endif
deleted file mode 100644
@@ -1,59 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/irqs.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define NUC93X_IRQ(x) (x)
-
-/* Main cpu interrupts */
-
-#define IRQ_WDT NUC93X_IRQ(1)
-#define IRQ_IRQ0 NUC93X_IRQ(2)
-#define IRQ_IRQ1 NUC93X_IRQ(3)
-#define IRQ_IRQ2 NUC93X_IRQ(4)
-#define IRQ_IRQ3 NUC93X_IRQ(5)
-#define IRQ_USBH NUC93X_IRQ(6)
-#define IRQ_APU NUC93X_IRQ(7)
-#define IRQ_VPOST NUC93X_IRQ(8)
-#define IRQ_ADC NUC93X_IRQ(9)
-#define IRQ_UART0 NUC93X_IRQ(10)
-#define IRQ_TIMER0 NUC93X_IRQ(11)
-#define IRQ_GPU0 NUC93X_IRQ(12)
-#define IRQ_GPU1 NUC93X_IRQ(13)
-#define IRQ_GPU2 NUC93X_IRQ(14)
-#define IRQ_GPU3 NUC93X_IRQ(15)
-#define IRQ_GPU4 NUC93X_IRQ(16)
-#define IRQ_VIN NUC93X_IRQ(17)
-#define IRQ_USBD NUC93X_IRQ(18)
-#define IRQ_VRAMLD NUC93X_IRQ(19)
-#define IRQ_GDMA0 NUC93X_IRQ(20)
-#define IRQ_GDMA1 NUC93X_IRQ(21)
-#define IRQ_SDIO NUC93X_IRQ(22)
-#define IRQ_FMI NUC93X_IRQ(22)
-#define IRQ_JPEG NUC93X_IRQ(23)
-#define IRQ_SPI0 NUC93X_IRQ(24)
-#define IRQ_SPI1 NUC93X_IRQ(25)
-#define IRQ_RTC NUC93X_IRQ(26)
-#define IRQ_PWM0 NUC93X_IRQ(27)
-#define IRQ_PWM1 NUC93X_IRQ(28)
-#define IRQ_PWM2 NUC93X_IRQ(29)
-#define IRQ_PWM3 NUC93X_IRQ(30)
-#define IRQ_I2SAC97 NUC93X_IRQ(31)
-#define IRQ_CAP0 IRQ_PWM0
-#define IRQ_CAP1 IRQ_PWM1
-#define IRQ_CAP2 IRQ_PWM2
-#define IRQ_CAP3 IRQ_PWM3
-#define NR_IRQS (IRQ_I2SAC97 + 1)
-
-#endif /* __ASM_ARCH_IRQ_H */
deleted file mode 100644
@@ -1,139 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/map.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H
-
-#define MAP_OFFSET (0xfff00000)
-#define CLK_OFFSET (0x10)
-
-#ifndef __ASSEMBLY__
-#define NUC93X_ADDR(x) ((void __iomem *)(0xF0000000 + ((x)&(~MAP_OFFSET))))
-#else
-#define NUC93X_ADDR(x) (0xF0000000 + ((x)&(~MAP_OFFSET)))
-#endif
-
- /*
- * nuc932 hardware register definition
- */
-
-#define NUC93X_PA_IRQ (0xFFF83000)
-#define NUC93X_PA_GCR (0xFFF00000)
-#define NUC93X_PA_EBI (0xFFF01000)
-#define NUC93X_PA_UART (0xFFF80000)
-#define NUC93X_PA_TIMER (0xFFF81000)
-#define NUC93X_PA_GPIO (0xFFF84000)
-#define NUC93X_PA_GDMA (0xFFF03000)
-#define NUC93X_PA_USBHOST (0xFFF0d000)
-#define NUC93X_PA_I2C (0xFFF89000)
-#define NUC93X_PA_LCD (0xFFF06000)
-#define NUC93X_PA_GE (0xFFF05000)
-#define NUC93X_PA_ADC (0xFFF85000)
-#define NUC93X_PA_RTC (0xFFF87000)
-#define NUC93X_PA_PWM (0xFFF82000)
-#define NUC93X_PA_ACTL (0xFFF0a000)
-#define NUC93X_PA_USBDEV (0xFFF0C000)
-#define NUC93X_PA_JEPEG (0xFFF0e000)
-#define NUC93X_PA_CACHE_T (0xFFF60000)
-#define NUC93X_PA_VRAM (0xFFF0b000)
-#define NUC93X_PA_DMAC (0xFFF09000)
-#define NUC93X_PA_I2SM (0xFFF08000)
-#define NUC93X_PA_CACHE (0xFFF02000)
-#define NUC93X_PA_GPU (0xFFF04000)
-#define NUC93X_PA_VIDEOIN (0xFFF07000)
-#define NUC93X_PA_SPI0 (0xFFF86000)
-#define NUC93X_PA_SPI1 (0xFFF88000)
-
- /*
- * nuc932 virtual address mapping.
- * interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-
-#define NUC93X_VA_IRQ NUC93X_ADDR(0x00000000)
-#define NUC93X_SZ_IRQ SZ_4K
-
-#define NUC93X_VA_GCR NUC93X_ADDR(NUC93X_PA_IRQ)
-#define NUC93X_VA_CLKPWR (NUC93X_VA_GCR+CLK_OFFSET)
-#define NUC93X_SZ_GCR SZ_4K
-
-/* EBI management */
-
-#define NUC93X_VA_EBI NUC93X_ADDR(NUC93X_PA_EBI)
-#define NUC93X_SZ_EBI SZ_4K
-
-/* UARTs */
-
-#define NUC93X_VA_UART NUC93X_ADDR(NUC93X_PA_UART)
-#define NUC93X_SZ_UART SZ_4K
-
-/* Timers */
-
-#define NUC93X_VA_TIMER NUC93X_ADDR(NUC93X_PA_TIMER)
-#define NUC93X_SZ_TIMER SZ_4K
-
-/* GPIO ports */
-
-#define NUC93X_VA_GPIO NUC93X_ADDR(NUC93X_PA_GPIO)
-#define NUC93X_SZ_GPIO SZ_4K
-
-/* GDMA control */
-
-#define NUC93X_VA_GDMA NUC93X_ADDR(NUC93X_PA_GDMA)
-#define NUC93X_SZ_GDMA SZ_4K
-
-/* I2C hardware controller */
-
-#define NUC93X_VA_I2C NUC93X_ADDR(NUC93X_PA_I2C)
-#define NUC93X_SZ_I2C SZ_4K
-
-/* LCD controller*/
-
-#define NUC93X_VA_LCD NUC93X_ADDR(NUC93X_PA_LCD)
-#define NUC93X_SZ_LCD SZ_4K
-
-/* 2D controller*/
-
-#define NUC93X_VA_GE NUC93X_ADDR(NUC93X_PA_GE)
-#define NUC93X_SZ_GE SZ_4K
-
-/* ADC */
-
-#define NUC93X_VA_ADC NUC93X_ADDR(NUC93X_PA_ADC)
-#define NUC93X_SZ_ADC SZ_4K
-
-/* RTC */
-
-#define NUC93X_VA_RTC NUC93X_ADDR(NUC93X_PA_RTC)
-#define NUC93X_SZ_RTC SZ_4K
-
-/* Pulse Width Modulation(PWM) Registers */
-
-#define NUC93X_VA_PWM NUC93X_ADDR(NUC93X_PA_PWM)
-#define NUC93X_SZ_PWM SZ_4K
-
-/* Audio Controller controller */
-
-#define NUC93X_VA_ACTL NUC93X_ADDR(NUC93X_PA_ACTL)
-#define NUC93X_SZ_ACTL SZ_4K
-
-/* USB Device port */
-
-#define NUC93X_VA_USBDEV NUC93X_ADDR(NUC93X_PA_USBDEV)
-#define NUC93X_SZ_USBDEV SZ_4K
-
-/* USB host controller*/
-#define NUC93X_VA_USBHOST NUC93X_ADDR(NUC93X_PA_USBHOST)
-#define NUC93X_SZ_USBHOST SZ_4K
-
-#endif /* __ASM_ARCH_MAP_H */
deleted file mode 100644
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/memory.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
deleted file mode 100644
@@ -1,53 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/regs-clock.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#ifndef __ASM_ARCH_REGS_CLOCK_H
-#define __ASM_ARCH_REGS_CLOCK_H
-
-/* Clock Control Registers */
-#define CLK_BA NUC93X_VA_CLKPWR
-#define REG_CLKEN (CLK_BA + 0x00)
-#define REG_CLKSEL (CLK_BA + 0x04)
-#define REG_CLKDIV (CLK_BA + 0x08)
-#define REG_PLLCON0 (CLK_BA + 0x0C)
-#define REG_PLLCON1 (CLK_BA + 0x10)
-#define REG_PMCON (CLK_BA + 0x14)
-#define REG_IRQWAKECON (CLK_BA + 0x18)
-#define REG_IRQWAKEFLAG (CLK_BA + 0x1C)
-#define REG_IPSRST (CLK_BA + 0x20)
-#define REG_CLKEN1 (CLK_BA + 0x24)
-#define REG_CLKDIV1 (CLK_BA + 0x28)
-
-/* Define PLL freq setting */
-#define PLL_DISABLE 0x12B63
-#define PLL_66MHZ 0x2B63
-#define PLL_100MHZ 0x4F64
-#define PLL_120MHZ 0x4F63
-#define PLL_166MHZ 0x4124
-#define PLL_200MHZ 0x4F24
-
-/* Define AHB:CPUFREQ ratio */
-#define AHB_CPUCLK_1_1 0x00
-#define AHB_CPUCLK_1_2 0x01
-#define AHB_CPUCLK_1_4 0x02
-#define AHB_CPUCLK_1_8 0x03
-
-/* Define APB:AHB ratio */
-#define APB_AHB_1_2 0x01
-#define APB_AHB_1_4 0x02
-#define APB_AHB_1_8 0x03
-
-/* Define clock skew */
-#define DEFAULTSKEW 0x48
-
-#endif /* __ASM_ARCH_REGS_CLOCK_H */
deleted file mode 100644
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/regs-ebi.h
- *
- * Copyright (c) 2009 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#ifndef __ASM_ARCH_REGS_EBI_H
-#define __ASM_ARCH_REGS_EBI_H
-
-/* EBI Control Registers */
-
-#define EBI_BA NUC93X_VA_EBI
-#define REG_EBICON (EBI_BA + 0x00)
-#define REG_ROMCON (EBI_BA + 0x04)
-#define REG_SDCONF0 (EBI_BA + 0x08)
-#define REG_SDCONF1 (EBI_BA + 0x0C)
-#define REG_SDTIME0 (EBI_BA + 0x10)
-#define REG_SDTIME1 (EBI_BA + 0x14)
-#define REG_EXT0CON (EBI_BA + 0x18)
-#define REG_EXT1CON (EBI_BA + 0x1C)
-#define REG_EXT2CON (EBI_BA + 0x20)
-#define REG_EXT3CON (EBI_BA + 0x24)
-#define REG_EXT4CON (EBI_BA + 0x28)
-#define REG_CKSKEW (EBI_BA + 0x2C)
-
-#endif /* __ASM_ARCH_REGS_EBI_H */
deleted file mode 100644
@@ -1,42 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/regs-irq.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef ___ASM_ARCH_REGS_IRQ_H
-#define ___ASM_ARCH_REGS_IRQ_H
-
-/* Advance Interrupt Controller (AIC) Registers */
-
-#define AIC_BA NUC93X_VA_IRQ
-
-#define REG_AIC_IRQSC (AIC_BA+0x80)
-#define REG_AIC_GEN (AIC_BA+0x84)
-#define REG_AIC_GASR (AIC_BA+0x88)
-#define REG_AIC_GSCR (AIC_BA+0x8C)
-#define REG_AIC_IRSR (AIC_BA+0x100)
-#define REG_AIC_IASR (AIC_BA+0x104)
-#define REG_AIC_ISR (AIC_BA+0x108)
-#define REG_AIC_IPER (AIC_BA+0x10C)
-#define REG_AIC_ISNR (AIC_BA+0x110)
-#define REG_AIC_IMR (AIC_BA+0x114)
-#define REG_AIC_OISR (AIC_BA+0x118)
-#define REG_AIC_MECR (AIC_BA+0x120)
-#define REG_AIC_MDCR (AIC_BA+0x124)
-#define REG_AIC_SSCR (AIC_BA+0x128)
-#define REG_AIC_SCCR (AIC_BA+0x12C)
-#define REG_AIC_EOSCR (AIC_BA+0x130)
-#define AIC_IPER (0x10C)
-#define AIC_ISNR (0x110)
-
-#endif /* ___ASM_ARCH_REGS_IRQ_H */
deleted file mode 100644
@@ -1,52 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/regs-serial.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARM_REGS_SERIAL_H
-#define __ASM_ARM_REGS_SERIAL_H
-
-#define UART0_BA NUC93X_VA_UART
-#define UART1_BA (NUC93X_VA_UART+0x100)
-
-#define UART0_PA NUC93X_PA_UART
-#define UART1_PA (NUC93X_PA_UART+0x100)
-
-
-#ifndef __ASSEMBLY__
-
-struct nuc93x_uart_clksrc {
- const char *name;
- unsigned int divisor;
- unsigned int min_baud;
- unsigned int max_baud;
-};
-
-struct nuc93x_uartcfg {
- unsigned char hwport;
- unsigned char unused;
- unsigned short flags;
- unsigned long uart_flags;
-
- unsigned long ucon;
- unsigned long ulcon;
- unsigned long ufcon;
-
- struct nuc93x_uart_clksrc *clocks;
- unsigned int clocks_size;
-};
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_ARM_REGS_SERIAL_H */
-
deleted file mode 100644
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/regs-timer.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_REGS_TIMER_H
-#define __ASM_ARCH_REGS_TIMER_H
-
-/* Timer Registers */
-
-#define TMR_BA NUC93X_VA_TIMER
-#define REG_TCSR0 (TMR_BA+0x00)
-#define REG_TICR0 (TMR_BA+0x08)
-#define REG_TDR0 (TMR_BA+0x10)
-#define REG_TISR (TMR_BA+0x18)
-#define REG_WTCR (TMR_BA+0x1C)
-
-#endif /* __ASM_ARCH_REGS_TIMER_H */
deleted file mode 100644
@@ -1,28 +0,0 @@
-/*
- * arch/arm/machnuc93x/include/mach/system.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/system.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <asm/proc-fns.h>
-
-static void arch_idle(void)
-{
-}
-
-static void arch_reset(char mode, const char *cmd)
-{
- cpu_reset(0);
-}
-
deleted file mode 100644
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/timex.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/timex.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE Now, I don't use it. */
-
-#define CLOCK_TICK_RATE 27000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
deleted file mode 100644
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/uncompress.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/uncompress.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-/* Defines for UART registers */
-
-#include <mach/regs-serial.h>
-#include <mach/map.h>
-#include <linux/serial_reg.h>
-
-#define arch_decomp_wdog()
-
-#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
-static u32 * const uart_base = (u32 *)UART0_PA;
-
-static void putc(int ch)
-{
- /* Check THRE and TEMT bits before we transmit the character.
- */
- while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
- barrier();
-
- *uart_base = ch;
-}
-
-static inline void flush(void)
-{
-}
-
-static void arch_decomp_setup(void)
-{
-}
-
-#endif/* __ASM_NUC93X_UNCOMPRESS_H */
deleted file mode 100644
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/vmalloc.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END 0xE0000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
deleted file mode 100644
@@ -1,66 +0,0 @@
-/*
- * linux/arch/arm/mach-nuc93x/irq.c
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/ptrace.h>
-#include <linux/sysdev.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-irq.h>
-
-static void nuc93x_irq_mask(struct irq_data *d)
-{
- __raw_writel(1 << d->irq, REG_AIC_MDCR);
-}
-
-/*
- * By the w90p910 spec,any irq,only write 1
- * to REG_AIC_EOSCR for ACK
- */
-
-static void nuc93x_irq_ack(struct irq_data *d)
-{
- __raw_writel(0x01, REG_AIC_EOSCR);
-}
-
-static void nuc93x_irq_unmask(struct irq_data *d)
-{
- __raw_writel(1 << d->irq, REG_AIC_MECR);
-
-}
-
-static struct irq_chip nuc93x_irq_chip = {
- .irq_ack = nuc93x_irq_ack,
- .irq_mask = nuc93x_irq_mask,
- .irq_unmask = nuc93x_irq_unmask,
-};
-
-void __init nuc93x_init_irq(void)
-{
- int irqno;
-
- __raw_writel(0xFFFFFFFE, REG_AIC_MDCR);
-
- for (irqno = IRQ_WDT; irqno <= NR_IRQS; irqno++) {
- irq_set_chip_and_handler(irqno, &nuc93x_irq_chip,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-}
deleted file mode 100644
@@ -1,43 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/mach-nuc910evb.c
- *
- * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
- *
- * Copyright (C) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/platform_device.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-#include <mach/map.h>
-
-#include "nuc932.h"
-
-static void __init nuc932evb_map_io(void)
-{
- nuc932_map_io();
- nuc932_init_clocks();
- nuc932_init_uartclk();
-}
-
-static void __init nuc932evb_init(void)
-{
- nuc932_board_init();
-}
-
-MACHINE_START(NUC932EVB, "NUC932EVB")
- /* Maintainer: Wan ZongShun */
- .boot_params = 0,
- .map_io = nuc932evb_map_io,
- .init_irq = nuc93x_init_irq,
- .init_machine = nuc932evb_init,
- .timer = &nuc93x_timer,
-MACHINE_END
deleted file mode 100644
@@ -1,65 +0,0 @@
-/*
- * linux/arch/arm/mach-nuc93x/nuc932.c
- *
- * Copyright (c) 2009 Nuvoton corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * NUC932 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-
-#include "cpu.h"
-#include "clock.h"
-
-/* define specific CPU platform device */
-
-static struct platform_device *nuc932_dev[] __initdata = {
-};
-
-/* define specific CPU platform io map */
-
-static struct map_desc nuc932evb_iodesc[] __initdata = {
-};
-
-/*Init NUC932 evb io*/
-
-void __init nuc932_map_io(void)
-{
- nuc93x_map_io(nuc932evb_iodesc, ARRAY_SIZE(nuc932evb_iodesc));
-}
-
-/*Init NUC932 clock*/
-
-void __init nuc932_init_clocks(void)
-{
- nuc93x_init_clocks();
-}
-
-/*enable NUC932 uart clock*/
-
-void __init nuc932_init_uartclk(void)
-{
- struct clk *ck_uart = clk_get(NULL, "uart");
- BUG_ON(IS_ERR(ck_uart));
-
- clk_enable(ck_uart);
-}
-
-/*Init NUC932 board info*/
-
-void __init nuc932_board_init(void)
-{
- nuc93x_board_init(nuc932_dev, ARRAY_SIZE(nuc932_dev));
-}
deleted file mode 100644
@@ -1,29 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/nuc932.h
- *
- * Copyright (c) 2008 Nuvoton corporation
- *
- * Header file for NUC93x CPU support
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void nuc93x_init_irq(void);
-extern struct sys_timer nuc93x_timer;
-
-/* extern file from nuc932.c */
-
-extern void nuc932_board_init(void);
-extern void nuc932_init_clocks(void);
-extern void nuc932_map_io(void);
-extern void nuc932_init_uartclk(void);
deleted file mode 100644
@@ -1,100 +0,0 @@
-/*
- * linux/arch/arm/mach-nuc93x/time.c
- *
- * Copyright (c) 2009 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#include <mach/system.h>
-#include <mach/map.h>
-#include <mach/regs-timer.h>
-
-#define RESETINT 0x01
-#define PERIOD (0x01 << 27)
-#define ONESHOT (0x00 << 27)
-#define COUNTEN (0x01 << 30)
-#define INTEN (0x01 << 29)
-
-#define TICKS_PER_SEC 100
-#define PRESCALE 0x63 /* Divider = prescale + 1 */
-
-unsigned int timer0_load;
-
-static unsigned long nuc93x_gettimeoffset(void)
-{
- return 0;
-}
-
-/*IRQ handler for the timer*/
-
-static irqreturn_t nuc93x_timer_interrupt(int irq, void *dev_id)
-{
- timer_tick();
- __raw_writel(0x01, REG_TISR); /* clear TIF0 */
- return IRQ_HANDLED;
-}
-
-static struct irqaction nuc93x_timer_irq = {
- .name = "nuc93x Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = nuc93x_timer_interrupt,
-};
-
-/*Set up timer reg.*/
-
-static void nuc93x_timer_setup(void)
-{
- struct clk *ck_ext = clk_get(NULL, "ext");
- struct clk *ck_timer = clk_get(NULL, "timer");
- unsigned int rate, val = 0;
-
- BUG_ON(IS_ERR(ck_ext) || IS_ERR(ck_timer));
-
- clk_enable(ck_timer);
- rate = clk_get_rate(ck_ext);
- clk_put(ck_ext);
- rate = rate / (PRESCALE + 0x01);
-
- /* set a known state */
- __raw_writel(0x00, REG_TCSR0);
- __raw_writel(RESETINT, REG_TISR);
-
- timer0_load = (rate / TICKS_PER_SEC);
- __raw_writel(timer0_load, REG_TICR0);
-
- val |= (PERIOD | COUNTEN | INTEN | PRESCALE);;
- __raw_writel(val, REG_TCSR0);
-
-}
-
-static void __init nuc93x_timer_init(void)
-{
- nuc93x_timer_setup();
- setup_irq(IRQ_TIMER0, &nuc93x_timer_irq);
-}
-
-struct sys_timer nuc93x_timer = {
- .init = nuc93x_timer_init,
- .offset = nuc93x_gettimeoffset,
- .resume = nuc93x_timer_setup
-};
This architecture received only generic maintenance since December 2009 when it was originally submitted, and no actual additional support since then. It has no defconfig entry either, meaning that it was never built by the ARM KAutobuild. Incidentally it currently doesn't build either when CONFIG_MACH_NUC932EVB is selected which is the only possible config choice. This is therefore dead code and should be removed. If someone wants to revive this code, it could be retrieved from the Git repository, and ideally be merged in mach-w90x900/ instead. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> --- arch/arm/Kconfig | 8 - arch/arm/mach-nuc93x/Kconfig | 19 --- arch/arm/mach-nuc93x/Makefile | 14 -- arch/arm/mach-nuc93x/Makefile.boot | 3 - arch/arm/mach-nuc93x/clock.c | 83 ---------- arch/arm/mach-nuc93x/clock.h | 36 ----- arch/arm/mach-nuc93x/cpu.c | 135 ---------------- arch/arm/mach-nuc93x/cpu.h | 48 ------ arch/arm/mach-nuc93x/dev.c | 42 ----- arch/arm/mach-nuc93x/include/mach/entry-macro.S | 32 ---- arch/arm/mach-nuc93x/include/mach/hardware.h | 22 --- arch/arm/mach-nuc93x/include/mach/io.h | 28 ---- arch/arm/mach-nuc93x/include/mach/irqs.h | 59 ------- arch/arm/mach-nuc93x/include/mach/map.h | 139 ----------------- arch/arm/mach-nuc93x/include/mach/memory.h | 21 --- arch/arm/mach-nuc93x/include/mach/regs-clock.h | 53 ------- arch/arm/mach-nuc93x/include/mach/regs-ebi.h | 33 ---- arch/arm/mach-nuc93x/include/mach/regs-irq.h | 42 ----- arch/arm/mach-nuc93x/include/mach/regs-serial.h | 52 ------ arch/arm/mach-nuc93x/include/mach/regs-timer.h | 28 ---- arch/arm/mach-nuc93x/include/mach/system.h | 28 ---- arch/arm/mach-nuc93x/include/mach/timex.h | 25 --- arch/arm/mach-nuc93x/include/mach/uncompress.h | 50 ------ arch/arm/mach-nuc93x/include/mach/vmalloc.h | 23 --- arch/arm/mach-nuc93x/irq.c | 66 -------- arch/arm/mach-nuc93x/mach-nuc932evb.c | 43 ----- arch/arm/mach-nuc93x/nuc932.c | 65 -------- arch/arm/mach-nuc93x/nuc932.h | 29 ---- arch/arm/mach-nuc93x/time.c | 100 ------------ 29 files changed, 0 insertions(+), 1326 deletions(-)